ARM: dts: Enable 88pm860x pmic

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

arch/arm/boot/dts/pxa910-dkb.dts

@@ -29,6 +29,143 @@ uart1: uart@d4017000 {
 			};
 			twsi1: i2c@d4011000 {
 				status = "okay";
+
+				pmic: 88pm860x@34 {
+					compatible = "marvell,88pm860x";
+					reg = <0x34>;
+					interrupts = <4>;
+					interrupt-parent = <&intc>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					marvell,88pm860x-irq-read-clr;
+					marvell,88pm860x-slave-addr = <0x11>;
+
+					regulators {
+						BUCK1 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK2 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK3 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <3000000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO1 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <2800000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO2 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO3 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO4 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO5 {
+							regulator-min-microvolt = <2900000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO6 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO7 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO8 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO9 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO10 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO12 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO13 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO14 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+					rtc {
+						marvell,88pm860x-vrtc = <1>;
+					};
+					touch {
+						marvell,88pm860x-gpadc-prebias = <1>;
+						marvell,88pm860x-gpadc-slot-cycle = <1>;
+						marvell,88pm860x-tsi-prebias = <6>;
+						marvell,88pm860x-pen-prebias = <16>;
+						marvell,88pm860x-pen-prechg = <2>;
+						marvell,88pm860x-resistor-X = <300>;
+					};
+					backlights {
+						backlight-0 {
+							marvell,88pm860x-iset = <4>;
+							marvell,88pm860x-pwm = <3>;
+						};
+						backlight-2 {
+						};
+					};
+					leds {
+						led0-red {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-green {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-blue {
+							marvell,88pm860x-iset = <12>;
+						};
+					};
+				};
 			};
 			rtc: rtc@d4010000 {
 				status = "okay";

arch/arm/boot/dts/pxa910.dtsi

@@ -115,6 +115,8 @@ gcb3: gpio@d4019100 {
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				mrvl,i2c-fast-mode;
@@ -123,6 +125,8 @@ twsi1: i2c@d4011000 {
 
 			twsi2: i2c@d4037000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4037000 0x1000>;
 				interrupts = <54>;
 				status = "disabled";