Commit 74e04345 authored by Markus Pargmann's avatar Markus Pargmann Committed by Jonathan Cameron

iio: bmg160: Remove i2c_client from data struct

i2c_client variable is not really used anymore in the core driver. It is
only used to get the device to make proper outputs.

This patch replaces all i2c_client usage through direct usage of the
device pointer.
Signed-off-by: default avatarMarkus Pargmann <mpa@pengutronix.de>
Reviewed-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent c6c9e995
......@@ -98,7 +98,7 @@
#define BMG160_AUTO_SUSPEND_DELAY_MS 2000
struct bmg160_data {
struct i2c_client *client;
struct device *dev;
struct regmap *regmap;
struct iio_trigger *dready_trig;
struct iio_trigger *motion_trig;
......@@ -148,7 +148,7 @@ static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n");
dev_err(data->dev, "Error writing reg_pmu_lpw\n");
return ret;
}
......@@ -178,7 +178,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val)
ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_pmu_bw\n");
dev_err(data->dev, "Error writing reg_pmu_bw\n");
return ret;
}
......@@ -194,13 +194,13 @@ static int bmg160_chip_init(struct bmg160_data *data)
ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_chip_id\n");
dev_err(data->dev, "Error reading reg_chip_id\n");
return ret;
}
dev_dbg(&data->client->dev, "Chip Id %x\n", val);
dev_dbg(data->dev, "Chip Id %x\n", val);
if (val != BMG160_CHIP_ID_VAL) {
dev_err(&data->client->dev, "invalid chip %x\n", val);
dev_err(data->dev, "invalid chip %x\n", val);
return -ENODEV;
}
......@@ -219,14 +219,14 @@ static int bmg160_chip_init(struct bmg160_data *data)
/* Set Default Range */
ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_range\n");
dev_err(data->dev, "Error writing reg_range\n");
return ret;
}
data->dps_range = BMG160_RANGE_500DPS;
ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_slope_thres\n");
dev_err(data->dev, "Error reading reg_slope_thres\n");
return ret;
}
data->slope_thres = val;
......@@ -235,7 +235,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
BMG160_INT1_BIT_OD, 0);
if (ret < 0) {
dev_err(&data->client->dev, "Error updating bits in reg_int_en_1\n");
dev_err(data->dev, "Error updating bits in reg_int_en_1\n");
return ret;
}
......@@ -243,7 +243,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_motion_intr\n");
return ret;
}
......@@ -257,17 +257,17 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
int ret;
if (on)
ret = pm_runtime_get_sync(&data->client->dev);
ret = pm_runtime_get_sync(data->dev);
else {
pm_runtime_mark_last_busy(&data->client->dev);
ret = pm_runtime_put_autosuspend(&data->client->dev);
pm_runtime_mark_last_busy(data->dev);
ret = pm_runtime_put_autosuspend(data->dev);
}
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Failed: bmg160_set_power_state for %d\n", on);
if (on)
pm_runtime_put_noidle(&data->client->dev);
pm_runtime_put_noidle(data->dev);
return ret;
}
......@@ -286,7 +286,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
BMG160_INT_MAP_0_BIT_ANY,
(status ? BMG160_INT_MAP_0_BIT_ANY : 0));
if (ret < 0) {
dev_err(&data->client->dev, "Error updating bits reg_int_map0\n");
dev_err(data->dev, "Error updating bits reg_int_map0\n");
return ret;
}
......@@ -296,7 +296,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
data->slope_thres);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_slope_thres\n");
return ret;
}
......@@ -305,7 +305,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
BMG160_INT_MOTION_Z);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_motion_intr\n");
return ret;
}
......@@ -321,7 +321,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_rst_latch\n");
return ret;
}
......@@ -335,7 +335,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
}
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_en0\n");
dev_err(data->dev, "Error writing reg_int_en0\n");
return ret;
}
......@@ -352,7 +352,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
BMG160_INT_MAP_1_BIT_NEW_DATA,
(status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
if (ret < 0) {
dev_err(&data->client->dev, "Error updating bits in reg_int_map1\n");
dev_err(data->dev, "Error updating bits in reg_int_map1\n");
return ret;
}
......@@ -361,7 +361,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
BMG160_INT_MODE_NON_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_rst_latch\n");
return ret;
}
......@@ -375,7 +375,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_rst_latch\n");
return ret;
}
......@@ -384,7 +384,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
}
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_en0\n");
dev_err(data->dev, "Error writing reg_int_en0\n");
return ret;
}
......@@ -414,7 +414,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val)
ret = regmap_write(data->regmap, BMG160_REG_RANGE,
bmg160_scale_table[i].dps_range);
if (ret < 0) {
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_range\n");
return ret;
}
......@@ -440,7 +440,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val)
ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_temp\n");
dev_err(data->dev, "Error reading reg_temp\n");
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
......@@ -470,7 +470,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
2);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading axis %d\n", axis);
dev_err(data->dev, "Error reading axis %d\n", axis);
bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
......@@ -813,7 +813,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig)
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_rst_latch\n");
dev_err(data->dev, "Error writing reg_rst_latch\n");
return ret;
}
......@@ -879,7 +879,7 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading reg_int_status2\n");
dev_err(data->dev, "Error reading reg_int_status2\n");
goto ack_intr_status;
}
......@@ -916,7 +916,7 @@ static irqreturn_t bmg160_event_handler(int irq, void *private)
BMG160_INT_MODE_LATCH_INT |
BMG160_INT_MODE_LATCH_RESET);
if (ret < 0)
dev_err(&data->client->dev,
dev_err(data->dev,
"Error writing reg_rst_latch\n");
}
......@@ -1021,7 +1021,7 @@ static int bmg160_probe(struct i2c_client *client,
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
data->dev = &client->dev;
ret = bmg160_chip_init(data);
if (ret < 0)
......@@ -1188,7 +1188,7 @@ static int bmg160_runtime_suspend(struct device *dev)
ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
if (ret < 0) {
dev_err(&data->client->dev, "set mode failed\n");
dev_err(data->dev, "set mode failed\n");
return -EAGAIN;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment