Commit 751d17e2 authored by Srinivas Pandruvada's avatar Srinivas Pandruvada Committed by Jonathan Cameron

iio: hid-sensors: Fix power and report state

In the original HID sensor hub firmwares all Named array enums were
to 0-based. But the most recent hub implemented as 1-based,
because of the implementation by one of the major OS vendor.
Using logical minimum for the field as the base of enum. So we add
logical minimum to the selector values before setting those fields.
Some sensor hub FWs already changed logical minimum from 0 to 1
to reflect this and hope every other vendor will follow.
There is no easy way to add a common HID quirk for NAry elements,
even if the standard specifies these field as NAry, the collection
used to describe selectors is still just "logical".
Signed-off-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 9f740ffa
......@@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER
If this driver is compiled as a module, it will be named
hid-sensor-trigger.
config HID_SENSOR_ENUM_BASE_QUIRKS
bool "ENUM base quirks for HID Sensor IIO drivers"
depends on HID_SENSOR_IIO_COMMON
help
Say yes here to build support for sensor hub FW using
enumeration, which is using 1 as base instead of 0.
Since logical minimum is still set 0 instead of 1,
there is no easy way to differentiate.
endmenu
......@@ -33,24 +33,34 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
{
struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
int state_val;
int report_val;
if (state) {
if (sensor_hub_device_open(st->hsdev))
return -EIO;
} else
state_val =
HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
report_val =
HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
} else {
sensor_hub_device_close(st->hsdev);
state_val =
HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
report_val =
HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
}
state_val = state ? 1 : 0;
if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
++state_val;
st->data_ready = state;
state_val += st->power_state.logical_minimum;
report_val += st->report_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
(s32)state_val);
sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
st->report_state.index,
(s32)state_val);
(s32)report_val);
return 0;
}
......
......@@ -117,4 +117,16 @@
#define HID_USAGE_SENSOR_PROP_REPORT_STATE 0x200316
#define HID_USAGE_SENSOR_PROY_POWER_STATE 0x200319
/* Power state enumerations */
#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x00
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x01
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x02
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x03
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x04
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x05
/* Report State enumerations */
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x00
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x01
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment