Commit 752d57a8 authored by Paul Bolle's avatar Paul Bolle Committed by Greg Kroah-Hartman

USB: Only treat lasting over-current conditions as errors

On a laptop I see these errors on (most) resumes:
    hub 3-0:1.0: over-current change on port 1
    hub 3-0:1.0: over-current change on port 2

Since over-current conditions can disappear quite quickly it's better to
downgrade that message to debug level, recheck for an over-current
condition a little later and only print and over-current condition error
if that condition (still) exists when it's rechecked.

Add similar logic to hub over-current changes. (That code is untested,
as those changes do not occur on this laptop.)
Signed-off-by: default avatarPaul Bolle <pebolle@tiscali.nl>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 0dfeefbc
...@@ -3408,12 +3408,19 @@ static void hub_events(void) ...@@ -3408,12 +3408,19 @@ static void hub_events(void)
} }
if (portchange & USB_PORT_STAT_C_OVERCURRENT) { if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
dev_err (hub_dev, u16 status = 0;
"over-current change on port %d\n", u16 unused;
i);
dev_dbg(hub_dev, "over-current change on port "
"%d\n", i);
clear_port_feature(hdev, i, clear_port_feature(hdev, i,
USB_PORT_FEAT_C_OVER_CURRENT); USB_PORT_FEAT_C_OVER_CURRENT);
msleep(100); /* Cool down */
hub_power_on(hub, true); hub_power_on(hub, true);
hub_port_status(hub, i, &status, &unused);
if (status & USB_PORT_STAT_OVERCURRENT)
dev_err(hub_dev, "over-current "
"condition on port %d\n", i);
} }
if (portchange & USB_PORT_STAT_C_RESET) { if (portchange & USB_PORT_STAT_C_RESET) {
...@@ -3445,10 +3452,17 @@ static void hub_events(void) ...@@ -3445,10 +3452,17 @@ static void hub_events(void)
hub->limited_power = 0; hub->limited_power = 0;
} }
if (hubchange & HUB_CHANGE_OVERCURRENT) { if (hubchange & HUB_CHANGE_OVERCURRENT) {
dev_dbg (hub_dev, "overcurrent change\n"); u16 status = 0;
msleep(500); /* Cool down */ u16 unused;
dev_dbg(hub_dev, "over-current change\n");
clear_hub_feature(hdev, C_HUB_OVER_CURRENT); clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
msleep(500); /* Cool down */
hub_power_on(hub, true); hub_power_on(hub, true);
hub_hub_status(hub, &status, &unused);
if (status & HUB_STATUS_OVERCURRENT)
dev_err(hub_dev, "over-current "
"condition\n");
} }
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment