ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry

Some nodes still have pinctrl-names entry, yet they don't have any pinctrl
group anymore. Drop them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts

@@ -28,7 +28,6 @@ chosen {
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
 
 		pwr_led {
 			label = "bananapi-m2-zero:red:pwr";
@@ -39,7 +38,6 @@ pwr_led {
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
 
 		sw4 {
 			label = "power";
@@ -67,7 +65,6 @@ reg_vdd_cpux: vdd-cpux-regulator {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
 };

arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts

@@ -64,7 +64,6 @@ reg_gmac_3v3: gmac-3v3 {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
 

arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts

@@ -79,7 +79,6 @@ reg_vcc3v3: vcc3v3 {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
 	};

arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi

@@ -69,7 +69,6 @@ hdmi_con_in: endpoint {
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
 
 		pwr_led {
 			label = "bananapi-m2-plus:red:pwr";
@@ -80,7 +79,6 @@ pwr_led {
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
 
 		sw4 {
 			label = "power";
@@ -101,7 +99,6 @@ reg_gmac_3v3: gmac-3v3 {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc 1>;
 		clock-names = "ext_clock";

arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts

@@ -46,7 +46,6 @@ reg_usb0_vbus: usb0-vbus {
 
 	vdd_cpux: gpio-regulator {
 		compatible = "regulator-gpio";
-		pinctrl-names = "default";
 		regulator-name = "vdd-cpux";
 		regulator-type = "voltage";
 		regulator-boot-on;

arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi

@@ -21,7 +21,6 @@ reg_vcc3v3: vcc3v3 {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;
 	};

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts

@@ -78,7 +78,6 @@ status {
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -96,7 +95,6 @@ reg_vcc3v3: vcc3v3 {
 
 	vdd_cpux: gpio-regulator {
 		compatible = "regulator-gpio";
-		pinctrl-names = "default";
 		regulator-name = "vdd-cpux";
 		regulator-type = "voltage";
 		regulator-boot-on;
@@ -112,7 +110,6 @@ vdd_cpux: gpio-regulator {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
 	};

arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts

@@ -78,7 +78,6 @@ reg_vcc3v3: vcc3v3 {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
 	};