Commit 7657c3a7 authored by Albert Herranz's avatar Albert Herranz Committed by Linus Torvalds

sdhci-of: reorganize driver to support additional hardware

This patch breaks down sdhci-of into a core portion and a eSDHC portion,
clearing the path to easily support additional hardware using the same OF
driver.
Signed-off-by: default avatarAlbert Herranz <albert_herranz@yahoo.es>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent bc1ad567
......@@ -44,6 +44,19 @@ config MMC_SDHCI_IO_ACCESSORS
This is silent Kconfig symbol that is selected by the drivers that
need to overwrite SDHCI IO memory accessors.
config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
bool
select MMC_SDHCI_IO_ACCESSORS
help
This option is selected by drivers running on big endian hosts
and performing I/O to a SDHCI controller through a bus that
implements a hardware byte swapper using a 32-bit datum.
This endian mapping mode is called "data invariance" and
has the effect of scrambling the addresses and formats of data
accessed in sizes other than the datum size.
This is the case for the Freescale eSDHC.
config MMC_SDHCI_PCI
tristate "SDHCI support on PCI bus"
depends on MMC_SDHCI && PCI
......@@ -75,11 +88,18 @@ config MMC_RICOH_MMC
config MMC_SDHCI_OF
tristate "SDHCI support on OpenFirmware platforms"
depends on MMC_SDHCI && PPC_OF
select MMC_SDHCI_IO_ACCESSORS
help
This selects the OF support for Secure Digital Host Controller
Interfaces. So far, only the Freescale eSDHC controller is known
to exist on OF platforms.
Interfaces.
If unsure, say N.
config MMC_SDHCI_OF_ESDHC
bool "SDHCI OF support for the Freescale eSDHC controller"
depends on MMC_SDHCI_OF
select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
help
This selects the Freescale eSDHC controller support.
If unsure, say N.
......
......@@ -38,6 +38,7 @@ obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
sdhci-of-y := sdhci-of-core.o
sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
......
......@@ -22,62 +22,37 @@
#include <linux/of_platform.h>
#include <linux/mmc/host.h>
#include <asm/machdep.h>
#include "sdhci-of.h"
#include "sdhci.h"
struct sdhci_of_data {
unsigned int quirks;
struct sdhci_ops ops;
};
struct sdhci_of_host {
unsigned int clock;
u16 xfer_mode_shadow;
};
#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
/*
* Ops and quirks for the Freescale eSDHC controller.
* These accessors are designed for big endian hosts doing I/O to
* little endian controllers incorporating a 32-bit hardware byte swapper.
*/
#define ESDHC_DMA_SYSCTL 0x40c
#define ESDHC_DMA_SNOOP 0x00000040
#define ESDHC_SYSTEM_CONTROL 0x2c
#define ESDHC_CLOCK_MASK 0x0000fff0
#define ESDHC_PREDIV_SHIFT 8
#define ESDHC_DIVIDER_SHIFT 4
#define ESDHC_CLOCK_PEREN 0x00000004
#define ESDHC_CLOCK_HCKEN 0x00000002
#define ESDHC_CLOCK_IPGEN 0x00000001
#define ESDHC_HOST_CONTROL_RES 0x05
static u32 esdhc_readl(struct sdhci_host *host, int reg)
u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg)
{
return in_be32(host->ioaddr + reg);
}
static u16 esdhc_readw(struct sdhci_host *host, int reg)
u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg)
{
u16 ret;
if (unlikely(reg == SDHCI_HOST_VERSION))
ret = in_be16(host->ioaddr + reg);
else
ret = in_be16(host->ioaddr + (reg ^ 0x2));
return ret;
return in_be16(host->ioaddr + (reg ^ 0x2));
}
static u8 esdhc_readb(struct sdhci_host *host, int reg)
u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg)
{
return in_8(host->ioaddr + (reg ^ 0x3));
}
static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg)
{
out_be32(host->ioaddr + reg, val);
}
static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
int base = reg & ~0x3;
......@@ -92,106 +67,21 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
of_host->xfer_mode_shadow = val;
return;
case SDHCI_COMMAND:
esdhc_writel(host, val << 16 | of_host->xfer_mode_shadow,
SDHCI_TRANSFER_MODE);
sdhci_be32bs_writel(host, val << 16 | of_host->xfer_mode_shadow,
SDHCI_TRANSFER_MODE);
return;
case SDHCI_BLOCK_SIZE:
/*
* Two last DMA bits are reserved, and first one is used for
* non-standard blksz of 4096 bytes that we don't support
* yet. So clear the DMA boundary bits.
*/
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
/* fall through */
}
clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift);
}
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg)
{
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift);
}
static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
{
int pre_div = 2;
int div = 1;
clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
if (clock == 0)
goto out;
while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
pre_div *= 2;
while (host->max_clk / pre_div / div > clock && div < 16)
div++;
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
clock, host->max_clk / pre_div / div);
pre_div >>= 1;
div--;
setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN |
div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT);
mdelay(100);
out:
host->clock = clock;
}
static int esdhc_enable_dma(struct sdhci_host *host)
{
setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
return 0;
}
static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
return of_host->clock;
}
static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
return of_host->clock / 256 / 16;
}
static struct sdhci_of_data sdhci_esdhc = {
.quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_NONSTANDARD_CLOCK |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_PIO_NEEDS_DELAY |
SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
SDHCI_QUIRK_NO_CARD_NO_RESET,
.ops = {
.readl = esdhc_readl,
.readw = esdhc_readw,
.readb = esdhc_readb,
.writel = esdhc_writel,
.writew = esdhc_writew,
.writeb = esdhc_writeb,
.set_clock = esdhc_set_clock,
.enable_dma = esdhc_enable_dma,
.get_max_clock = esdhc_get_max_clock,
.get_min_clock = esdhc_get_min_clock,
},
};
#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */
#ifdef CONFIG_PM
......@@ -301,9 +191,11 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev)
}
static const struct of_device_id sdhci_of_match[] = {
#ifdef CONFIG_MMC_SDHCI_OF_ESDHC
{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
{ .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
#endif
{ .compatible = "generic-sdhci", },
{},
};
......
/*
* Freescale eSDHC controller driver.
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/mmc/host.h>
#include "sdhci-of.h"
#include "sdhci.h"
/*
* Ops and quirks for the Freescale eSDHC controller.
*/
#define ESDHC_DMA_SYSCTL 0x40c
#define ESDHC_DMA_SNOOP 0x00000040
#define ESDHC_SYSTEM_CONTROL 0x2c
#define ESDHC_CLOCK_MASK 0x0000fff0
#define ESDHC_PREDIV_SHIFT 8
#define ESDHC_DIVIDER_SHIFT 4
#define ESDHC_CLOCK_PEREN 0x00000004
#define ESDHC_CLOCK_HCKEN 0x00000002
#define ESDHC_CLOCK_IPGEN 0x00000001
#define ESDHC_HOST_CONTROL_RES 0x05
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
u16 ret;
if (unlikely(reg == SDHCI_HOST_VERSION))
ret = in_be16(host->ioaddr + reg);
else
ret = sdhci_be32bs_readw(host, reg);
return ret;
}
static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
{
if (reg == SDHCI_BLOCK_SIZE) {
/*
* Two last DMA bits are reserved, and first one is used for
* non-standard blksz of 4096 bytes that we don't support
* yet. So clear the DMA boundary bits.
*/
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
}
sdhci_be32bs_writew(host, val, reg);
}
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
{
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
sdhci_be32bs_writeb(host, val, reg);
}
static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
{
int pre_div = 2;
int div = 1;
clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
if (clock == 0)
goto out;
while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
pre_div *= 2;
while (host->max_clk / pre_div / div > clock && div < 16)
div++;
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
clock, host->max_clk / pre_div / div);
pre_div >>= 1;
div--;
setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN |
ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN |
div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT);
mdelay(100);
out:
host->clock = clock;
}
static int esdhc_enable_dma(struct sdhci_host *host)
{
setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
return 0;
}
static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
return of_host->clock;
}
static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
return of_host->clock / 256 / 16;
}
struct sdhci_of_data sdhci_esdhc = {
.quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_NONSTANDARD_CLOCK |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_PIO_NEEDS_DELAY |
SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
SDHCI_QUIRK_NO_CARD_NO_RESET,
.ops = {
.readl = sdhci_be32bs_readl,
.readw = esdhc_readw,
.readb = sdhci_be32bs_readb,
.writel = sdhci_be32bs_writel,
.writew = esdhc_writew,
.writeb = esdhc_writeb,
.set_clock = esdhc_set_clock,
.enable_dma = esdhc_enable_dma,
.get_max_clock = esdhc_get_max_clock,
.get_min_clock = esdhc_get_min_clock,
},
};
/*
* OpenFirmware bindings for Secure Digital Host Controller Interface.
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef __SDHCI_OF_H
#define __SDHCI_OF_H
#include <linux/types.h>
#include "sdhci.h"
struct sdhci_of_data {
unsigned int quirks;
struct sdhci_ops ops;
};
struct sdhci_of_host {
unsigned int clock;
u16 xfer_mode_shadow;
};
extern u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg);
extern u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg);
extern u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg);
extern void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg);
extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg);
extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg);
extern struct sdhci_of_data sdhci_esdhc;
#endif /* __SDHCI_OF_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment