crypto: qat - add clock enable CSR to chip info

Add global clock enable CSR to the chip info since the CSR offset
will be different in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/qat/qat_common/icp_qat_fw_loader_handle.h

@@ -29,6 +29,7 @@ struct icp_qat_fw_loader_chip_info {
 	u32 lm_size;
 	u32 icp_rst_csr;
 	u32 icp_rst_mask;
+	u32 glb_clk_enable_csr;
 	bool fw_auth;
 };
 

drivers/crypto/qat/qat_common/qat_hal.c

@@ -471,11 +471,11 @@ static int qat_hal_init_esram(struct icp_qat_fw_loader_handle *handle)
 #define SHRAM_INIT_CYCLES 2060
 int qat_hal_clr_reset(struct icp_qat_fw_loader_handle *handle)
 {
+	unsigned int clk_csr = handle->chip_info->glb_clk_enable_csr;
 	unsigned int reset_mask = handle->chip_info->icp_rst_mask;
 	unsigned int reset_csr = handle->chip_info->icp_rst_csr;
 	unsigned long ae_mask = handle->hal_handle->ae_mask;
 	unsigned char ae = 0;
-	unsigned int clk_csr;
 	unsigned int times = 100;
 	unsigned int csr_val;
 
@@ -490,9 +490,9 @@ int qat_hal_clr_reset(struct icp_qat_fw_loader_handle *handle)
 		csr_val &= reset_mask;
 	} while (csr_val);
 	/* enable clock */
-	clk_csr = GET_CAP_CSR(handle, ICP_GLOBAL_CLK_ENABLE);
-	clk_csr |= reset_mask;
-	SET_CAP_CSR(handle, ICP_GLOBAL_CLK_ENABLE, clk_csr);
+	csr_val = GET_CAP_CSR(handle, clk_csr);
+	csr_val |= reset_mask;
+	SET_CAP_CSR(handle, clk_csr, csr_val);
 	if (qat_hal_check_ae_alive(handle))
 		goto out_err;
 
@@ -701,6 +701,7 @@ static int qat_hal_chip_init(struct icp_qat_fw_loader_handle *handle,
 		handle->chip_info->lm2lm3 = false;
 		handle->chip_info->lm_size = ICP_QAT_UCLO_MAX_LMEM_REG;
 		handle->chip_info->icp_rst_csr = ICP_RESET;
+		handle->chip_info->glb_clk_enable_csr = ICP_GLOBAL_CLK_ENABLE;
 		handle->chip_info->fw_auth = true;
 		break;
 	case PCI_DEVICE_ID_INTEL_QAT_DH895XCC:
@@ -709,6 +710,7 @@ static int qat_hal_chip_init(struct icp_qat_fw_loader_handle *handle,
 		handle->chip_info->lm2lm3 = false;
 		handle->chip_info->lm_size = ICP_QAT_UCLO_MAX_LMEM_REG;
 		handle->chip_info->icp_rst_csr = ICP_RESET;
+		handle->chip_info->glb_clk_enable_csr = ICP_GLOBAL_CLK_ENABLE;
 		handle->chip_info->fw_auth = false;
 		break;
 	default: