Commit cb439361 authored by Jack Xu's avatar Jack Xu Committed by Herbert Xu

crypto: qat - add reset CSR and mask to chip info

Add reset CSR offset and mask to chip info since they are different
in new QAT devices. This also simplifies the reset/clrReset functions
by using the reset mask.
Signed-off-by: default avatarJack Xu <jack.xu@intel.com>
Co-developed-by: default avatarWojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: default avatarWojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: default avatarGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 4f07195d
......@@ -27,6 +27,8 @@ struct icp_qat_fw_loader_chip_info {
bool nn;
bool lm2lm3;
u32 lm_size;
u32 icp_rst_csr;
u32 icp_rst_mask;
bool fw_auth;
};
......
......@@ -301,12 +301,13 @@ static unsigned short qat_hal_get_reg_addr(unsigned int type,
void qat_hal_reset(struct icp_qat_fw_loader_handle *handle)
{
unsigned int ae_reset_csr;
unsigned int reset_mask = handle->chip_info->icp_rst_mask;
unsigned int reset_csr = handle->chip_info->icp_rst_csr;
unsigned int csr_val;
ae_reset_csr = GET_CAP_CSR(handle, ICP_RESET);
ae_reset_csr |= handle->hal_handle->ae_mask << RST_CSR_AE_LSB;
ae_reset_csr |= handle->hal_handle->slice_mask << RST_CSR_QAT_LSB;
SET_CAP_CSR(handle, ICP_RESET, ae_reset_csr);
csr_val = GET_CAP_CSR(handle, reset_csr);
csr_val |= reset_mask;
SET_CAP_CSR(handle, reset_csr, csr_val);
}
static void qat_hal_wr_indr_csr(struct icp_qat_fw_loader_handle *handle,
......@@ -470,28 +471,27 @@ static int qat_hal_init_esram(struct icp_qat_fw_loader_handle *handle)
#define SHRAM_INIT_CYCLES 2060
int qat_hal_clr_reset(struct icp_qat_fw_loader_handle *handle)
{
unsigned int reset_mask = handle->chip_info->icp_rst_mask;
unsigned int reset_csr = handle->chip_info->icp_rst_csr;
unsigned long ae_mask = handle->hal_handle->ae_mask;
unsigned int ae_reset_csr;
unsigned char ae;
unsigned char ae = 0;
unsigned int clk_csr;
unsigned int times = 100;
unsigned int csr;
unsigned int csr_val;
/* write to the reset csr */
ae_reset_csr = GET_CAP_CSR(handle, ICP_RESET);
ae_reset_csr &= ~(handle->hal_handle->ae_mask << RST_CSR_AE_LSB);
ae_reset_csr &= ~(handle->hal_handle->slice_mask << RST_CSR_QAT_LSB);
csr_val = GET_CAP_CSR(handle, reset_csr);
csr_val &= ~reset_mask;
do {
SET_CAP_CSR(handle, ICP_RESET, ae_reset_csr);
SET_CAP_CSR(handle, reset_csr, csr_val);
if (!(times--))
goto out_err;
csr = GET_CAP_CSR(handle, ICP_RESET);
} while ((handle->hal_handle->ae_mask |
(handle->hal_handle->slice_mask << RST_CSR_QAT_LSB)) & csr);
csr_val = GET_CAP_CSR(handle, reset_csr);
csr_val &= reset_mask;
} while (csr_val);
/* enable clock */
clk_csr = GET_CAP_CSR(handle, ICP_GLOBAL_CLK_ENABLE);
clk_csr |= handle->hal_handle->ae_mask << 0;
clk_csr |= handle->hal_handle->slice_mask << 20;
clk_csr |= reset_mask;
SET_CAP_CSR(handle, ICP_GLOBAL_CLK_ENABLE, clk_csr);
if (qat_hal_check_ae_alive(handle))
goto out_err;
......@@ -700,6 +700,7 @@ static int qat_hal_chip_init(struct icp_qat_fw_loader_handle *handle,
handle->chip_info->nn = true;
handle->chip_info->lm2lm3 = false;
handle->chip_info->lm_size = ICP_QAT_UCLO_MAX_LMEM_REG;
handle->chip_info->icp_rst_csr = ICP_RESET;
handle->chip_info->fw_auth = true;
break;
case PCI_DEVICE_ID_INTEL_QAT_DH895XCC:
......@@ -707,6 +708,7 @@ static int qat_hal_chip_init(struct icp_qat_fw_loader_handle *handle,
handle->chip_info->nn = true;
handle->chip_info->lm2lm3 = false;
handle->chip_info->lm_size = ICP_QAT_UCLO_MAX_LMEM_REG;
handle->chip_info->icp_rst_csr = ICP_RESET;
handle->chip_info->fw_auth = false;
break;
default:
......@@ -719,6 +721,9 @@ static int qat_hal_chip_init(struct icp_qat_fw_loader_handle *handle,
&pci_info->pci_bars[hw_data->get_sram_bar_id(hw_data)];
handle->hal_sram_addr_v = sram_bar->virt_addr;
}
handle->chip_info->icp_rst_mask = (hw_data->ae_mask << RST_CSR_AE_LSB) |
(hw_data->accel_mask << RST_CSR_QAT_LSB);
handle->hal_cap_g_ctl_csr_addr_v =
(void __iomem *)((uintptr_t)misc_bar->virt_addr +
ICP_QAT_CAP_OFFSET);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment