arm64: dts: qcom: sm8250: add wsa and va codec macros

Add support for WSA and VA codec macros along with WSA soundwire
controller required for getting audio on RB5.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201202180741.16386-5-srinivas.kandagatla@linaro.org
[bjorn: Replaced LPASS_CDC clock defines with constants]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -1264,6 +1264,47 @@ tcsr_mutex: hwlock@1f40000 {
 			#hwlock-cells = <1>;
 		};
 
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8250-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&audiocc 1>,
+				 <&audiocc 0>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&aoncc 0>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+		};
+
+		swr0: soundwire-controller@3250000 {
+			reg = <0 0x03250000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		audiocc: clock-controller@3300000 {
 			compatible = "qcom,sm8250-lpass-audiocc";
 			reg = <0 0x03300000 0 0x30000>;
@@ -1274,6 +1315,21 @@ audiocc: clock-controller@3300000 {
 			clock-names = "core", "audio", "bus";
 		};
 
+		vamacro: codec@3370000 {
+			compatible = "qcom,sm8250-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+			clocks = <&aoncc 0>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			clock-names = "mclk", "macro", "dcodec";
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		aoncc: clock-controller@3380000 {
 			compatible = "qcom,sm8250-lpass-aoncc";
 			reg = <0 0x03380000 0 0x40000>;