[ARM] 3487/1: IXP4xx: Support non-PCI systems

Patch from Deepak Saxena

This patch allows for the addition of IXP4xx systems that do not make
use of the PCI interface by moving the CONFIG_PCI symbol selection to
be platform-specific instead of for all of IXP4xx. If at least one machine
with PCI support is built, the PCI code will be compiled in, but when
building !PCI, this will drastically shrink the kernel size.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -150,8 +150,6 @@ config ARCH_IOP3XX
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
-	select DMABOUNCE
-	select PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 

arch/arm/mach-ixp4xx/Kconfig

@@ -11,6 +11,7 @@ comment "IXP4xx Platforms"
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,
@@ -18,6 +19,7 @@ config MACH_NSLU2
 
 config ARCH_AVILA
 	bool "Avila"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
@@ -25,6 +27,7 @@ config ARCH_AVILA
 
 config ARCH_ADI_COYOTE
 	bool "Coyote"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
@@ -32,6 +35,7 @@ config ARCH_ADI_COYOTE
 
 config ARCH_IXDP425
 	bool "IXDP425"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
@@ -39,6 +43,7 @@ config ARCH_IXDP425
 
 config MACH_IXDPG425
 	bool "IXDPG425"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
@@ -46,6 +51,7 @@ config MACH_IXDPG425
 
 config MACH_IXDP465
 	bool "IXDP465"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDP465 Development Platform (Also known as BMP).
@@ -72,6 +78,7 @@ config ARCH_PRPMC1100
 config MACH_NAS100D
 	bool
 	prompt "NAS100D"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Iomega's
 	  NAS 100d device. For more information on this platform,
@@ -96,6 +103,7 @@ config CPU_IXP46X
 config MACH_GTWX5715
 	bool "Gemtek WX5715 (Linksys WRV54G)"
 	depends on ARCH_IXP4XX
+	select PCI
 	help
 		This board is currently inside the Linksys WRV54G Gateways.
 
@@ -110,11 +118,16 @@ config MACH_GTWX5715
 		"High Speed" UART is n/c (as far as I can tell)
 		20 Pin ARM/Xscale JTAG interface on J2
 
-
 comment "IXP4xx Options"
 
+config DMABOUNCE
+	bool
+	default y
+	depends on PCI
+
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
+	depends on PCI
 	help
           IXP4xx provides two methods of accessing PCI memory space:
 

arch/arm/mach-ixp4xx/Makefile

@@ -2,8 +2,9 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	+= common.o common-pci.o 
+obj-y	+= common.o
 
+obj-$(CONFIG_PCI)		+= common-pci.o
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pci.o ixdp425-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o

include/asm-arm/arch-ixp4xx/io.h

@@ -260,6 +260,12 @@ check_signature(const unsigned char __iomem *bus_addr, const unsigned char *sign
 
 #endif
 
+#ifndef CONFIG_PCI
+
+#define	__io(v)		v
+
+#else
+
 /*
  * IXP4xx does not have a transparent cpu -> PCI I/O translation
  * window.  Instead, it has a set of registers that must be tweaked
@@ -578,6 +584,7 @@ __ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
 
 #define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
 #define	ioport_unmap(addr)
+#endif	// !CONFIG_PCI
 
 #endif	//  __ASM_ARM_ARCH_IO_H
 

include/asm-arm/arch-ixp4xx/memory.h

@@ -14,7 +14,7 @@
  */
 #define PHYS_OFFSET	UL(0x00000000)
 
-#ifndef __ASSEMBLY__
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
 void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);