Commit 76be6c07 authored by Ryder Lee's avatar Ryder Lee Committed by Felix Fietkau

mt76: mt7915: add .set_bitrate_mask() callback

Add runtime configuration for bitrate mask. This update firmware rate
control to add a boundary on top of table to limit the rate selection
for each peer, so when user set bitrates vht-mcs-5 1:9, which actually
means nss = 1 mcs = 0~9. This only applies to data frames as for other
mgmt, mcast, bcast still use legacy rates as it is.

Note that driver does not support GI configuration.

Example:
iw dev wlan0 set bitrates vht-mcs-5 1:9 he-mcs-5 2:7
iw dev wlan0 set bitrates legacy-5 6 he-mcs-5 2:0-11
Signed-off-by: default avatarRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
parent a441a77a
......@@ -1804,8 +1804,10 @@ void mt7915_mac_sta_rc_work(struct work_struct *work)
if (changed & (IEEE80211_RC_SUPP_RATES_CHANGED |
IEEE80211_RC_NSS_CHANGED |
IEEE80211_RC_BW_CHANGED))
IEEE80211_RC_BW_CHANGED)) {
mt7915_mcu_add_he(dev, vif, sta);
mt7915_mcu_add_rate_ctrl(dev, vif, sta);
}
if (changed & IEEE80211_RC_SMPS_CHANGED)
mt7915_mcu_add_smps(dev, vif, sta);
......
......@@ -172,6 +172,22 @@ static int get_omac_idx(enum nl80211_iftype type, u64 mask)
return -1;
}
static void mt7915_init_bitrate_mask(struct ieee80211_vif *vif)
{
struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
int i;
for (i = 0; i < ARRAY_SIZE(mvif->bitrate_mask.control); i++) {
mvif->bitrate_mask.control[i].legacy = GENMASK(31, 0);
memset(mvif->bitrate_mask.control[i].ht_mcs, GENMASK(7, 0),
sizeof(mvif->bitrate_mask.control[i].ht_mcs));
memset(mvif->bitrate_mask.control[i].vht_mcs, GENMASK(15, 0),
sizeof(mvif->bitrate_mask.control[i].vht_mcs));
memset(mvif->bitrate_mask.control[i].he_mcs, GENMASK(15, 0),
sizeof(mvif->bitrate_mask.control[i].he_mcs));
}
}
static int mt7915_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
......@@ -241,6 +257,8 @@ static int mt7915_add_interface(struct ieee80211_hw *hw,
vif->offload_flags = 0;
vif->offload_flags |= IEEE80211_OFFLOAD_ENCAP_4ADDR;
mt7915_init_bitrate_mask(vif);
out:
mutex_unlock(&dev->mt76.mutex);
......@@ -911,17 +929,15 @@ static void mt7915_sta_statistics(struct ieee80211_hw *hw,
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
}
static void
mt7915_sta_rc_update(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
u32 changed)
static void mt7915_sta_rc_work(void *data, struct ieee80211_sta *sta)
{
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
struct mt7915_dev *dev = msta->vif->phy->dev;
struct ieee80211_hw *hw = msta->vif->phy->mt76->hw;
u32 *changed = data;
spin_lock_bh(&dev->sta_poll_lock);
msta->stats.changed |= changed;
msta->stats.changed |= *changed;
if (list_empty(&msta->rc_list))
list_add_tail(&msta->rc_list, &dev->sta_rc_list);
spin_unlock_bh(&dev->sta_poll_lock);
......@@ -929,6 +945,39 @@ mt7915_sta_rc_update(struct ieee80211_hw *hw,
ieee80211_queue_work(hw, &dev->rc_work);
}
static void mt7915_sta_rc_update(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
u32 changed)
{
mt7915_sta_rc_work(&changed, sta);
}
static int
mt7915_set_bitrate_mask(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
const struct cfg80211_bitrate_mask *mask)
{
struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
enum nl80211_band band = mvif->phy->mt76->chandef.chan->band;
u32 changed;
if (mask->control[band].gi == NL80211_TXRATE_FORCE_LGI)
return -EINVAL;
changed = IEEE80211_RC_SUPP_RATES_CHANGED;
mvif->bitrate_mask = *mask;
/* Update firmware rate control to add a boundary on top of table
* to limit the rate selection for each peer, so when set bitrates
* vht-mcs-5 1:9, which actually means nss = 1 mcs = 0~9. This only
* applies to data frames as for the other mgmt, mcast, bcast still
* use legacy rates as it is.
*/
ieee80211_iterate_stations_atomic(hw, mt7915_sta_rc_work, &changed);
return 0;
}
static void mt7915_sta_set_4addr(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
......@@ -990,6 +1039,7 @@ const struct ieee80211_ops mt7915_ops = {
.get_survey = mt76_get_survey,
.get_antenna = mt76_get_antenna,
.set_antenna = mt7915_set_antenna,
.set_bitrate_mask = mt7915_set_bitrate_mask,
.set_coverage_class = mt7915_set_coverage_class,
.sta_statistics = mt7915_sta_statistics,
.sta_set_4addr = mt7915_sta_set_4addr,
......
......@@ -209,6 +209,112 @@ mt7915_mcu_get_sta_nss(u16 mcs_map)
return nss - 1;
}
static void
mt7915_mcu_set_sta_he_mcs(struct ieee80211_sta *sta, __le16 *he_mcs,
const u16 *mask)
{
struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
struct cfg80211_chan_def *chandef = &msta->vif->phy->mt76->chandef;
int nss, max_nss = sta->rx_nss > 3 ? 4 : sta->rx_nss;
u16 mcs_map;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_80P80:
mcs_map = le16_to_cpu(sta->he_cap.he_mcs_nss_supp.rx_mcs_80p80);
break;
case NL80211_CHAN_WIDTH_160:
mcs_map = le16_to_cpu(sta->he_cap.he_mcs_nss_supp.rx_mcs_160);
break;
default:
mcs_map = le16_to_cpu(sta->he_cap.he_mcs_nss_supp.rx_mcs_80);
break;
}
for (nss = 0; nss < max_nss; nss++) {
int mcs;
switch ((mcs_map >> (2 * nss)) & 0x3) {
case IEEE80211_HE_MCS_SUPPORT_0_11:
mcs = GENMASK(11, 0);
break;
case IEEE80211_HE_MCS_SUPPORT_0_9:
mcs = GENMASK(9, 0);
break;
case IEEE80211_HE_MCS_SUPPORT_0_7:
mcs = GENMASK(7, 0);
break;
default:
mcs = 0;
}
mcs = mcs ? fls(mcs & mask[nss]) - 1 : -1;
switch (mcs) {
case 0 ... 7:
mcs = IEEE80211_HE_MCS_SUPPORT_0_7;
break;
case 8 ... 9:
mcs = IEEE80211_HE_MCS_SUPPORT_0_9;
break;
case 10 ... 11:
mcs = IEEE80211_HE_MCS_SUPPORT_0_11;
break;
default:
mcs = IEEE80211_HE_MCS_NOT_SUPPORTED;
break;
}
mcs_map &= ~(0x3 << (nss * 2));
mcs_map |= mcs << (nss * 2);
/* only support 2ss on 160MHz */
if (nss > 1 && (sta->bandwidth == IEEE80211_STA_RX_BW_160))
break;
}
*he_mcs = cpu_to_le16(mcs_map);
}
static void
mt7915_mcu_set_sta_vht_mcs(struct ieee80211_sta *sta, __le16 *vht_mcs,
const u16 *mask)
{
u16 mcs_map = le16_to_cpu(sta->vht_cap.vht_mcs.rx_mcs_map);
int nss, max_nss = sta->rx_nss > 3 ? 4 : sta->rx_nss;
u16 mcs;
for (nss = 0; nss < max_nss; nss++, mcs_map >>= 2) {
switch (mcs_map & 0x3) {
case IEEE80211_VHT_MCS_SUPPORT_0_9:
mcs = GENMASK(9, 0);
break;
case IEEE80211_VHT_MCS_SUPPORT_0_8:
mcs = GENMASK(8, 0);
break;
case IEEE80211_VHT_MCS_SUPPORT_0_7:
mcs = GENMASK(7, 0);
break;
default:
mcs = 0;
}
vht_mcs[nss] = cpu_to_le16(mcs & mask[nss]);
/* only support 2ss on 160MHz */
if (nss > 1 && (sta->bandwidth == IEEE80211_STA_RX_BW_160))
break;
}
}
static void
mt7915_mcu_set_sta_ht_mcs(struct ieee80211_sta *sta, u8 *ht_mcs,
const u8 *mask)
{
int nss, max_nss = sta->rx_nss > 3 ? 4 : sta->rx_nss;
for (nss = 0; nss < max_nss; nss++)
ht_mcs[nss] = sta->ht_cap.mcs.rx_mask[nss] & mask[nss];
}
static int
mt7915_mcu_parse_response(struct mt76_dev *mdev, int cmd,
struct sk_buff *skb, int seq)
......@@ -1344,8 +1450,11 @@ mt7915_mcu_sta_basic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
static void
mt7915_mcu_sta_he_tlv(struct sk_buff *skb, struct ieee80211_sta *sta)
{
struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
struct ieee80211_sta_he_cap *he_cap = &sta->he_cap;
struct ieee80211_he_cap_elem *elem = &he_cap->he_cap_elem;
enum nl80211_band band = msta->vif->phy->mt76->chandef.chan->band;
const u16 *mcs_mask = msta->vif->bitrate_mask.control[band].he_mcs;
struct sta_rec_he *he;
struct tlv *tlv;
u32 cap = 0;
......@@ -1436,15 +1545,18 @@ mt7915_mcu_sta_he_tlv(struct sk_buff *skb, struct ieee80211_sta *sta)
case IEEE80211_STA_RX_BW_160:
if (elem->phy_cap_info[0] &
IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
he->max_nss_mcs[CMD_HE_MCS_BW8080] =
he_cap->he_mcs_nss_supp.rx_mcs_80p80;
mt7915_mcu_set_sta_he_mcs(sta,
&he->max_nss_mcs[CMD_HE_MCS_BW8080],
mcs_mask);
he->max_nss_mcs[CMD_HE_MCS_BW160] =
he_cap->he_mcs_nss_supp.rx_mcs_160;
mt7915_mcu_set_sta_he_mcs(sta,
&he->max_nss_mcs[CMD_HE_MCS_BW160],
mcs_mask);
fallthrough;
default:
he->max_nss_mcs[CMD_HE_MCS_BW80] =
he_cap->he_mcs_nss_supp.rx_mcs_80;
mt7915_mcu_set_sta_he_mcs(sta,
&he->max_nss_mcs[CMD_HE_MCS_BW80],
mcs_mask);
break;
}
......@@ -2089,12 +2201,12 @@ mt7915_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7915_dev *dev,
{
struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
struct cfg80211_chan_def *chandef = &mvif->phy->mt76->chandef;
struct cfg80211_bitrate_mask *mask = &mvif->bitrate_mask;
enum nl80211_band band = chandef->chan->band;
struct sta_rec_ra *ra;
struct tlv *tlv;
u32 supp_rate = sta->supp_rates[band];
u32 cap = sta->wme ? STA_CAP_WMM : 0;
u8 i, nss = sta->rx_nss;
tlv = mt7915_mcu_add_tlv(skb, STA_REC_RA, sizeof(*ra));
ra = (struct sta_rec_ra *)tlv;
......@@ -2107,6 +2219,7 @@ mt7915_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7915_dev *dev,
ra->phy.bw = sta->bandwidth;
if (supp_rate) {
supp_rate &= mask->control[band].legacy;
ra->rate_len = hweight32(supp_rate);
if (band == NL80211_BAND_2GHZ) {
......@@ -2124,10 +2237,8 @@ mt7915_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7915_dev *dev,
}
if (sta->ht_cap.ht_supported) {
for (i = 0; i < nss; i++)
ra->ht_mcs[i] = sta->ht_cap.mcs.rx_mask[i];
const u8 *mcs_mask = mask->control[band].ht_mcs;
ra->supp_ht_mcs = *(__le32 *)ra->ht_mcs;
ra->supp_mode |= MODE_HT;
ra->af = sta->ht_cap.ampdu_factor;
ra->ht_gf = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD);
......@@ -2143,13 +2254,16 @@ mt7915_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7915_dev *dev,
cap |= STA_CAP_RX_STBC;
if (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING)
cap |= STA_CAP_LDPC;
mt7915_mcu_set_sta_ht_mcs(sta, ra->ht_mcs, mcs_mask);
ra->supp_ht_mcs = *(__le32 *)ra->ht_mcs;
}
if (sta->vht_cap.vht_supported) {
u16 mcs_map = le16_to_cpu(sta->vht_cap.vht_mcs.rx_mcs_map);
u16 vht_mcs;
const u16 *mcs_mask = mask->control[band].vht_mcs;
u8 af;
ra->supp_mode |= MODE_VHT;
af = FIELD_GET(IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK,
sta->vht_cap.cap);
ra->af = max_t(u8, ra->af, af);
......@@ -2166,29 +2280,7 @@ mt7915_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7915_dev *dev,
if (sta->vht_cap.cap & IEEE80211_VHT_CAP_RXLDPC)
cap |= STA_CAP_VHT_LDPC;
ra->supp_mode |= MODE_VHT;
for (i = 0; i < nss; i++, mcs_map >>= 2) {
switch (mcs_map & 0x3) {
case IEEE80211_VHT_MCS_SUPPORT_0_9:
vht_mcs = GENMASK(9, 0);
break;
case IEEE80211_VHT_MCS_SUPPORT_0_8:
vht_mcs = GENMASK(8, 0);
break;
case IEEE80211_VHT_MCS_SUPPORT_0_7:
vht_mcs = GENMASK(7, 0);
break;
default:
vht_mcs = 0;
}
ra->supp_vht_mcs[i] = cpu_to_le16(vht_mcs);
/* only support 2ss on 160MHz */
if (i > 1 && (ra->bw == CMD_CBW_160MHZ ||
ra->bw == CMD_CBW_8080MHZ))
break;
}
mt7915_mcu_set_sta_vht_mcs(sta, ra->supp_vht_mcs, mcs_mask);
}
if (sta->he_cap.has_he) {
......@@ -2217,6 +2309,29 @@ int mt7915_mcu_add_rate_ctrl(struct mt7915_dev *dev, struct ieee80211_vif *vif,
MCU_EXT_CMD(STA_REC_UPDATE), true);
}
int mt7915_mcu_add_he(struct mt7915_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
struct sk_buff *skb;
int len;
if (!sta->he_cap.has_he)
return 0;
len = sizeof(struct sta_req_hdr) + sizeof(struct sta_rec_he);
skb = mt7915_mcu_alloc_sta_req(dev, mvif, msta, len);
if (IS_ERR(skb))
return PTR_ERR(skb);
mt7915_mcu_sta_he_tlv(skb, sta);
return mt76_mcu_skb_send_msg(&dev->mt76, skb,
MCU_EXT_CMD(STA_REC_UPDATE), true);
}
int mt7915_mcu_add_sta_adv(struct mt7915_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta, bool enable)
{
......
......@@ -100,6 +100,7 @@ struct mt7915_vif {
struct mt7915_phy *phy;
struct ieee80211_tx_queue_params queue_params[IEEE80211_NUM_ACS];
struct cfg80211_bitrate_mask bitrate_mask;
};
struct mib_stats {
......@@ -323,6 +324,8 @@ int mt7915_mcu_add_obss_spr(struct mt7915_dev *dev, struct ieee80211_vif *vif,
bool enable);
int mt7915_mcu_add_rate_ctrl(struct mt7915_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
int mt7915_mcu_add_he(struct mt7915_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
int mt7915_mcu_add_smps(struct mt7915_dev *dev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
int mt7915_set_channel(struct mt7915_phy *phy);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment