arm64: dts: ti: k3-am62p-j722s: Move AM62P specific USB1 to am62p-main.dtsi

The USB1 instance of USB controller on AM62P is different from the USB1
instance of USB controller on J722S. Thus, move the USB1 instance from
the shared "k3-am62p-j722s-common-main.dtsi" file to the AM62p specific
"k3-am62p-main.dtsi" file. Include "k3-am62p-main.dtsi" in "k3-am62p.dtsi".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240615081600.3602462-3-s-vadapalli@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi

@@ -662,32 +662,6 @@ usb0: usb@31000000 {
 		};
 	};
 
-	usbss1: usb@f910000 {
-		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f910000 0x00 0x800>,
-		      <0x00 0x0f918000 0x00 0x400>;
-		clocks = <&k3_clks 162 3>;
-		clock-names = "ref";
-		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
-		ranges;
-		status = "disabled";
-
-		usb1: usb@31100000 {
-			compatible = "snps,dwc3";
-			reg = <0x00 0x31100000 0x00 0x50000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
-			<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
-			interrupt-names = "host", "peripheral";
-			maximum-speed = "high-speed";
-			dr_mode = "otg";
-			snps,usb2-gadget-lpm-disable;
-			snps,usb2-lpm-disable;
-		};
-	};
-
 	fss: bus@fc00000 {
 		compatible = "simple-bus";
 		reg = <0x00 0x0fc00000 0x00 0x70000>;

arch/arm64/boot/dts/ti/k3-am62p-main.dtsi

+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree file for the AM62P MAIN domain peripherals
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	usbss1: usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+			<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
+		};
+	};
+};

arch/arm64/boot/dts/ti/k3-am62p.dtsi

@@ -123,3 +123,6 @@ cbass_wakeup: bus@b00000 {
 #include "k3-am62p-j722s-common-main.dtsi"
 #include "k3-am62p-j722s-common-mcu.dtsi"
 #include "k3-am62p-j722s-common-wakeup.dtsi"
+
+/* Include AM62P specific peripherals */
+#include "k3-am62p-main.dtsi"