[PATCH] New Omnikey Cardman 4040 driver

Add new Omnikey Cardman 4040 smartcard reader driver
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

MAINTAINERS

@@ -1873,6 +1873,11 @@ L:	linux-tr@linuxtr.net
 W:	http://www.linuxtr.net
 S:	Maintained
 
+OMNIKEY CARDMAN 4040 DRIVER
+P:	Harald Welte
+M:	laforge@gnumonks.org
+S:	Maintained
+
 ONSTREAM SCSI TAPE DRIVER
 P:	Willem Riede
 M:	osst@riede.org

drivers/char/pcmcia/Kconfig

@@ -18,5 +18,18 @@ config SYNCLINK_CS
 	  The module will be called synclinkmp.  If you want to do that, say M
 	  here.
 
+config CARDMAN_4040
+	tristate "Omnikey CardMan 4040 support"
+	depends on PCMCIA
+	help
+	  Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
+	  reader.
+
+	  This card is basically a USB CCID device connected to a FIFO
+	  in I/O space.  To use the kernel driver, you will need either the
+	  PC/SC ifdhandler provided from the Omnikey homepage
+	  (http://www.omnikey.com/), or a current development version of OpenCT
+	  (http://www.opensc.org/).
+
 endmenu
 

drivers/char/pcmcia/Makefile

@@ -5,3 +5,4 @@
 #
 
 obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
+obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o

drivers/char/pcmcia/cm4040_cs.h

+#ifndef	_CM4040_H_
+#define	_CM4040_H_
+
+#define	CM_MAX_DEV		4
+
+#define	DEVICE_NAME		"cmx"
+#define	MODULE_NAME		"cm4040_cs"
+
+#define REG_OFFSET_BULK_OUT      0
+#define REG_OFFSET_BULK_IN       0
+#define REG_OFFSET_BUFFER_STATUS 1
+#define REG_OFFSET_SYNC_CONTROL  2
+
+#define BSR_BULK_IN_FULL  0x02
+#define BSR_BULK_OUT_FULL 0x01
+
+#define SCR_HOST_TO_READER_START 0x80
+#define SCR_ABORT                0x40
+#define SCR_EN_NOTIFY            0x20
+#define SCR_ACK_NOTIFY           0x10
+#define SCR_READER_TO_HOST_DONE  0x08
+#define SCR_HOST_TO_READER_DONE  0x04
+#define SCR_PULSE_INTERRUPT      0x02
+#define SCR_POWER_DOWN           0x01
+
+
+#define  CMD_PC_TO_RDR_ICCPOWERON       0x62
+#define  CMD_PC_TO_RDR_GETSLOTSTATUS    0x65
+#define  CMD_PC_TO_RDR_ICCPOWEROFF      0x63
+#define  CMD_PC_TO_RDR_SECURE           0x69
+#define  CMD_PC_TO_RDR_GETPARAMETERS    0x6C
+#define  CMD_PC_TO_RDR_RESETPARAMETERS  0x6D
+#define  CMD_PC_TO_RDR_SETPARAMETERS    0x61
+#define  CMD_PC_TO_RDR_XFRBLOCK         0x6F
+#define  CMD_PC_TO_RDR_ESCAPE           0x6B
+#define  CMD_PC_TO_RDR_ICCCLOCK         0x6E
+#define  CMD_PC_TO_RDR_TEST_SECURE      0x74
+#define  CMD_PC_TO_RDR_OK_SECURE        0x89
+
+
+#define  CMD_RDR_TO_PC_SLOTSTATUS         0x81
+#define  CMD_RDR_TO_PC_DATABLOCK          0x80
+#define  CMD_RDR_TO_PC_PARAMETERS         0x82
+#define  CMD_RDR_TO_PC_ESCAPE             0x83
+#define  CMD_RDR_TO_PC_OK_SECURE          0x89
+
+#endif	/* _CM4040_H_ */