[WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reload

This patch contains two fixes:

1)In omap_wdt_probe() the watchdog is reset and disabled. This
requires register access and the clks needs to be enabled temporarily

2)In omap_wdt_open() the timer register needs to be reloaded
to trigger a new timer value (the default of 60s)

Tested on OMAP34xx platform (Zoom1)
Reviewed-by: Kevin Hilman <khilman@ti.deeprootsystems.com>
Signed-off-by: Ulrik Bech Hald <ubh@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

drivers/watchdog/omap_wdt.c

@@ -159,6 +159,7 @@ static int omap_wdt_open(struct inode *inode, struct file *file)
 	file->private_data = (void *) wdev;
 
 	omap_wdt_set_timeout(wdev);
+	omap_wdt_ping(wdev); /* trigger loading of new timeout value */
 	omap_wdt_enable(wdev);
 
 	return nonseekable_open(inode, file);
@@ -313,6 +314,9 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, wdev);
 
+	clk_enable(wdev->ick);
+	clk_enable(wdev->fck);
+
 	omap_wdt_disable(wdev);
 	omap_wdt_adjust_timeout(timer_margin);
 
@@ -332,6 +336,9 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
 	/* autogate OCP interface clock */
 	__raw_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG);
 
+	clk_disable(wdev->ick);
+	clk_disable(wdev->fck);
+
 	omap_wdt_dev = pdev;
 
 	return 0;