[PATCH] ppc32: Update MPC834x platform to work with new phylib

MPC834x uses the gianfar network driver which now uses the new phylib.  We
need to update the platform code to create a gianfar platform MDIO bus and
pass the right intializations to the gianfar driver to make things work
again.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/platforms/83xx/mpc834x_sys.c

@@ -51,6 +51,9 @@
 
 #include <syslib/ppc83xx_setup.h>
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
@@ -97,6 +100,7 @@ mpc834x_sys_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;
@@ -111,24 +115,27 @@ mpc834x_sys_setup_arch(void)
 #endif
 	mpc83xx_early_serial_map();
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO);
+
+	mdata->irq[0] = MPC83xx_IRQ_EXT1;
+	mdata->irq[1] = MPC83xx_IRQ_EXT2;
+	mdata->irq[2] = -1;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC83xx_IRQ_EXT1;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC83xx_IRQ_EXT2;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 

arch/ppc/syslib/mpc83xx_devices.c

@@ -27,18 +27,20 @@
  * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup
  */
 
+struct gianfar_mdio_data mpc83xx_mdio_pdata = {
+	.paddr = 0x24520,
+};
+
 static struct gianfar_platform_data mpc83xx_tsec1_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = 0x24000,
 };
 
 static struct gianfar_platform_data mpc83xx_tsec2_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = 0x24000,
 };
 
 static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = {
@@ -220,6 +222,12 @@ struct platform_device ppc_sys_platform_devices[] = {
 			},
 		},
 	},
+	[MPC83xx_MDIO] = {
+		.name = "fsl-gianfar_mdio",
+		.id = 0,
+		.dev.platform_data = &mpc83xx_mdio_pdata,
+		.num_resources = 0,
+	},
 };
 
 static int __init mach_mpc83xx_fixup(struct platform_device *pdev)

arch/ppc/syslib/mpc83xx_sys.c

@@ -24,72 +24,72 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8349E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80500000,
-		.num_devices	= 8,
+		.num_devices	= 9,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8349",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80510000,
-		.num_devices	= 7,
+		.num_devices	= 8,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8347E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80520000,
-		.num_devices	= 8,
+		.num_devices	= 9,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8347",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80530000,
-		.num_devices	= 7,
+		.num_devices	= 8,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART,
-			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8343E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80540000,
-		.num_devices	= 7,
+		.num_devices	= 8,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
-			MPC83xx_USB2_DR,
+			MPC83xx_USB2_DR, MPC83xx_MDIO
 		},
 	},
 	{
 		.ppc_sys_name	= "8343",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80550000,
-		.num_devices	= 6,
+		.num_devices	= 7,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
 			MPC83xx_IIC2, MPC83xx_DUART,
-			MPC83xx_USB2_DR,
+			MPC83xx_USB2_DR, MPC83xx_MDIO
 		},
 	},
 	{	/* default match */

include/asm-ppc/mpc83xx.h

@@ -107,6 +107,7 @@ enum ppc_sys_devices {
 	MPC83xx_SEC2,
 	MPC83xx_USB2_DR,
 	MPC83xx_USB2_MPH,
+	MPC83xx_MDIO,
 };
 
 #endif /* CONFIG_83xx */