Commit 78c7d8f9 authored by Linus Walleij's avatar Linus Walleij Committed by Stephen Boyd

dt-bindings: clock: Create YAML schema for ICST clocks

The ICST clocks used in the ARM Integrator, Versatile and
RealView platforms are updated to use YAML schema, and two
new ICST clocks used by the Integrator IM-PD1 logical module
are added in the process.

Cc: devicetree@vger.kernel.org
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20200219103326.81120-1-linus.walleij@linaro.org
[sboyd@kernel.org: Fix some typos]
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent bb6d3fb3
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM System Controller ICST Clocks
maintainers:
- Linus Walleij <linusw@kernel.org>
description: |
The ICS525 and ICS307 oscillators are produced by Integrated
Devices Technology (IDT). ARM integrated these oscillators deeply into their
reference designs by adding special control registers that manage such
oscillators to their system controllers.
The various ARM system controllers contain logic to serialize and initialize
an ICST clock request after a write to the 32 bit register at an offset
into the system controller. Furthermore, to even be able to alter one of
these frequencies, the system controller must first be unlocked by
writing a special token to another offset in the system controller.
Some ARM hardware contain special versions of the serial interface that only
connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
different values and sometimes also hard-wires the output divider. They
therefore have special compatible strings as per this table (the OD value is
the value on the pins, not the resulting output divider).
In the core modules and logic tiles, the ICST is a configurable clock fed
from a 24 MHz clock on the motherboard (usually the main crystal) used for
generating e.g. video clocks. It is located on the core module and there is
only one of these. This clock node must be a subnode of the core module.
Hardware variant RDW OD VDW
Integrator/AP 22 1 Bit 8 0, rest variable
integratorap-cm
Integrator/AP 46 3 Bit 8 0, rest variable
integratorap-sys
Integrator/AP 22 or 1 17 or (33 or 25 MHz)
integratorap-pci 14 1 14
Integrator/CP 22 variable Bit 8 0, rest variable
integratorcp-cm-core
Integrator/CP 22 variable Bit 8 0, rest variable
integratorcp-cm-mem
The ICST oscillator must be provided inside a system controller node.
properties:
"#clock-cells":
const: 0
compatible:
enum:
- arm,syscon-icst525
- arm,syscon-icst307
- arm,syscon-icst525-integratorap-cm
- arm,syscon-icst525-integratorap-sys
- arm,syscon-icst525-integratorap-pci
- arm,syscon-icst525-integratorcp-cm-core
- arm,syscon-icst525-integratorcp-cm-mem
- arm,integrator-cm-auxosc
- arm,versatile-cm-auxosc
- arm,impd-vco1
- arm,impd-vco2
clocks:
description: Parent clock for the ICST VCO
maxItems: 1
clock-output-names:
maxItems: 1
lock-offset:
$ref: '/schemas/types.yaml#/definitions/uint32'
description: Offset to the unlocking register for the oscillator
vco-offset:
$ref: '/schemas/types.yaml#/definitions/uint32'
description: Offset to the VCO register for the oscillator
required:
- "#clock-cells"
- compatible
- clocks
examples:
- |
vco1: clock@00 {
compatible = "arm,impd1-vco1";
#clock-cells = <0>;
lock-offset = <0x08>;
vco-offset = <0x00>;
clocks = <&sysclk>;
clock-output-names = "IM-PD1-VCO1";
};
...
Clock bindings for ARM Integrator and Versatile Core Module clocks
Auxiliary Oscillator Clock
This is a configurable clock fed from a 24 MHz chrystal,
used for generating e.g. video clocks. It is located on the
core module and there is only one of these.
This clock node *must* be a subnode of the core module, since
it obtains the base address for it's address range from its
parent node.
Required properties:
- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
- #clock-cells: must be <0>
Optional properties:
- clocks: parent clock(s)
Example:
core-module@10000000 {
xtal24mhz: xtal24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
auxosc: cm_aux_osc@25M {
#clock-cells = <0>;
compatible = "arm,integrator-cm-auxosc";
clocks = <&xtal24mhz>;
};
};
ARM System Controller ICST clocks
The ICS525 and ICS307 oscillators are produced by Integrated Devices
Technology (IDT). ARM integrated these oscillators deeply into their
reference designs by adding special control registers that manage such
oscillators to their system controllers.
The various ARM system controllers contain logic to serialize and initialize
an ICST clock request after a write to the 32 bit register at an offset
into the system controller. Furthermore, to even be able to alter one of
these frequencies, the system controller must first be unlocked by
writing a special token to another offset in the system controller.
Some ARM hardware contain special versions of the serial interface that only
connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
different values and sometimes also hardwire the output divider. They
therefore have special compatible strings as per this table (the OD value is
the value on the pins, not the resulting output divider):
Hardware variant: RDW OD VDW
Integrator/AP 22 1 Bit 8 0, rest variable
integratorap-cm
Integrator/AP 46 3 Bit 8 0, rest variable
integratorap-sys
Integrator/AP 22 or 1 17 or (33 or 25 MHz)
integratorap-pci 14 1 14
Integrator/CP 22 variable Bit 8 0, rest variable
integratorcp-cm-core
Integrator/CP 22 variable Bit 8 0, rest variable
integratorcp-cm-mem
The ICST oscillator must be provided inside a system controller node.
Required properties:
- compatible: must be one of
"arm,syscon-icst525"
"arm,syscon-icst307"
"arm,syscon-icst525-integratorap-cm"
"arm,syscon-icst525-integratorap-sys"
"arm,syscon-icst525-integratorap-pci"
"arm,syscon-icst525-integratorcp-cm-core"
"arm,syscon-icst525-integratorcp-cm-mem"
- lock-offset: the offset address into the system controller where the
unlocking register is located
- vco-offset: the offset address into the system controller where the
ICST control register is located (even 32 bit address)
- #clock-cells: must be <0>
- clocks: parent clock, since the ICST needs a parent clock to derive its
frequency from, this attribute is compulsory.
Example:
syscon: syscon@10000000 {
compatible = "syscon";
reg = <0x10000000 0x1000>;
oscclk0: osc0@c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x0c>;
clocks = <&xtal24mhz>;
};
(...)
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment