i2c: i801: Correct Intel Jasper Lake SOC naming

There is no suffix applied to Intel Jasper Lake SOC. Remove it
from the comments and definitions. Besides that, it's a SOC,
thus replace PCH with SOC where it appropriate.

Fixes: e0c61c04 ("i2c: i801: Add support for Intel Jasper Lake")
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Documentation/i2c/busses/i2c-i801.rst

@@ -42,7 +42,7 @@ Supported adapters:
   * Intel Comet Lake (PCH)
   * Intel Elkhart Lake (PCH)
   * Intel Tiger Lake (PCH)
-  * Intel Jasper Lake (PCH)
+  * Intel Jasper Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 

drivers/i2c/busses/Kconfig

@@ -145,7 +145,7 @@ config I2C_I801
 	    Comet Lake (PCH)
 	    Elkhart Lake (PCH)
 	    Tiger Lake (PCH)
-	    Jasper Lake (PCH)
+	    Jasper Lake (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -67,7 +67,7 @@
  * Comet Lake-H (PCH)		0x06a3	32	hard	yes	yes	yes
  * Elkhart Lake (PCH)		0x4b23	32	hard	yes	yes	yes
  * Tiger Lake-LP (PCH)		0xa0a3	32	hard	yes	yes	yes
- * Jasper Lake-N (PCH)		0x4da3	32	hard	yes	yes	yes
+ * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -226,7 +226,7 @@
 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS		0x34a3
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
-#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_N_SMBUS		0x4da3
+#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
@@ -1076,7 +1076,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_N_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
 	{ 0, }
 };
 
@@ -1759,7 +1759,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
 	case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS:
-	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_N_SMBUS:
+	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
 		priv->features |= FEATURE_BLOCK_PROC;
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;