Commit 794b1607 authored by Mike Isely's avatar Mike Isely Committed by Mauro Carvalho Chehab

V4L/DVB (7321): pvrusb2: Rework context handling and initialization

This change significantly rearranges pvr2_context level initialization
and operation:

1. A new kernel thread is set up for management of the context.

2. Destruction of the pvr2_context instance is moved into the kernel
   thread.  No other context is able to remove the instance; doing
   this simplifies lock handling.

3. The callback into pvrusb2-main, which is used to trigger
   initialization of each interface, is now issued from this kernel
   thread.  Previously it had been indirectly issued out of the work
   queue thread in pvr2_hdw, which led to deadlock issues if the
   interface needed to change a control setting (which in turn
   requires dispatch of another work queue entry).

4. Callbacks into the interfaces (via the pvr2_channel structure) are
   now issued strictly from this thread.  The net result of this is
   that such callback functions can now also safely operate driver
   controls without deadlocking the work queue.  (At the moment this
   is not actually a problem, but I'm anticipating issues with this in
   the future).

5. There is no longer any need for anyone to enter / exit the
   pvr2_context structure.  Implementation of the kernel thread here
   allows this all to be internal now, simplifying other logic.

6. A very very longstanding issue involving a mutex deadlock between
   the pvrusb2 driver and v4l should now be solved.  The deadlock
   involved the pvr2_context mutex and a globals-protecting mutex in
   v4l.  During initialization the driver would take the pvr2_context
   mutex first then the v4l2 interface would register with v4l and
   implicitly take the v4l mutex.  Later when v4l would call back into
   the driver, the two mutexes could possibly be taken in the opposite
   order, a situation that can lead to deadlock.  In practice this
   really wasn't an issue unless a v4l app tried to start VERY early
   after the driver appeared.  However it still needed to be solved,
   and with the use of the kernel thread relieving need for
   pvr2_context mutex, the problem should be finally solved.
Signed-off-by: default avatarMike Isely <isely@pobox.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 8f59100a
......@@ -23,6 +23,7 @@
#include "pvrusb2-ioread.h"
#include "pvrusb2-hdw.h"
#include "pvrusb2-debug.h"
#include <linux/kthread.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
......@@ -30,32 +31,65 @@
static void pvr2_context_destroy(struct pvr2_context *mp)
{
pvr2_trace(PVR2_TRACE_STRUCT,"Destroying pvr_main id=%p",mp);
pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (destroy)",mp);
if (mp->hdw) pvr2_hdw_destroy(mp->hdw);
kfree(mp);
}
static void pvr2_context_state_check(struct pvr2_context *mp)
static void pvr2_context_notify(struct pvr2_context *mp)
{
if (mp->init_flag) return;
switch (pvr2_hdw_get_state(mp->hdw)) {
case PVR2_STATE_WARM: break;
case PVR2_STATE_ERROR: break;
case PVR2_STATE_READY: break;
case PVR2_STATE_RUN: break;
default: return;
mp->notify_flag = !0;
wake_up(&mp->wait_data);
}
static int pvr2_context_thread(void *_mp)
{
struct pvr2_channel *ch1,*ch2;
struct pvr2_context *mp = _mp;
pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (thread start)",mp);
/* Finish hardware initialization */
if (pvr2_hdw_initialize(mp->hdw,
(void (*)(void *))pvr2_context_notify,mp)) {
mp->video_stream.stream =
pvr2_hdw_get_video_stream(mp->hdw);
/* Trigger interface initialization. By doing this here
initialization runs in our own safe and cozy thread
context. */
if (mp->setup_func) mp->setup_func(mp);
} else {
pvr2_trace(PVR2_TRACE_CTXT,
"pvr2_context %p (thread skipping setup)",mp);
/* Even though initialization did not succeed, we're still
going to enter the wait loop anyway. We need to do this
in order to await the expected disconnect (which we will
detect in the normal course of operation). */
}
pvr2_context_enter(mp); do {
mp->init_flag = !0;
mp->video_stream.stream = pvr2_hdw_get_video_stream(mp->hdw);
if (mp->setup_func) {
mp->setup_func(mp);
/* Now just issue callbacks whenever hardware state changes or if
there is a disconnect. If there is a disconnect and there are
no channels left, then there's no reason to stick around anymore
so we'll self-destruct - tearing down the rest of this driver
instance along the way. */
pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (thread enter loop)",mp);
while (!mp->disconnect_flag || mp->mc_first) {
if (mp->notify_flag) {
mp->notify_flag = 0;
pvr2_trace(PVR2_TRACE_CTXT,
"pvr2_context %p (thread notify)",mp);
for (ch1 = mp->mc_first; ch1; ch1 = ch2) {
ch2 = ch1->mc_next;
if (ch1->check_func) ch1->check_func(ch1);
}
}
} while (0); pvr2_context_exit(mp);
}
wait_event_interruptible(mp->wait_data, mp->notify_flag);
}
pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (thread end)",mp);
pvr2_context_destroy(mp);
return 0;
}
struct pvr2_context *pvr2_context_create(
......@@ -63,10 +97,12 @@ struct pvr2_context *pvr2_context_create(
const struct usb_device_id *devid,
void (*setup_func)(struct pvr2_context *))
{
struct task_struct *thread;
struct pvr2_context *mp = NULL;
mp = kzalloc(sizeof(*mp),GFP_KERNEL);
if (!mp) goto done;
pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr_main id=%p",mp);
pvr2_trace(PVR2_TRACE_CTXT,"pvr2_context %p (create)",mp);
init_waitqueue_head(&mp->wait_data);
mp->setup_func = setup_func;
mutex_init(&mp->mutex);
mp->hdw = pvr2_hdw_create(intf,devid);
......@@ -75,57 +111,45 @@ struct pvr2_context *pvr2_context_create(
mp = NULL;
goto done;
}
pvr2_hdw_initialize(mp->hdw,
(void (*)(void *))pvr2_context_state_check,
mp);
thread = kthread_run(pvr2_context_thread, mp, "pvrusb2-context");
if (!thread) {
pvr2_context_destroy(mp);
mp = NULL;
goto done;
}
done:
return mp;
}
void pvr2_context_enter(struct pvr2_context *mp)
static void pvr2_context_enter(struct pvr2_context *mp)
{
mutex_lock(&mp->mutex);
pvr2_trace(PVR2_TRACE_CREG,"pvr2_context_enter(id=%p)",mp);
}
void pvr2_context_exit(struct pvr2_context *mp)
static void pvr2_context_exit(struct pvr2_context *mp)
{
int destroy_flag = 0;
if (!(mp->mc_first || !mp->disconnect_flag)) {
destroy_flag = !0;
}
pvr2_trace(PVR2_TRACE_CREG,"pvr2_context_exit(id=%p) outside",mp);
mutex_unlock(&mp->mutex);
if (destroy_flag) pvr2_context_destroy(mp);
}
static void pvr2_context_run_checks(struct pvr2_context *mp)
{
struct pvr2_channel *ch1,*ch2;
for (ch1 = mp->mc_first; ch1; ch1 = ch2) {
ch2 = ch1->mc_next;
if (ch1->check_func) {
ch1->check_func(ch1);
}
}
if (destroy_flag) pvr2_context_notify(mp);
}
void pvr2_context_disconnect(struct pvr2_context *mp)
{
pvr2_context_enter(mp); do {
pvr2_hdw_disconnect(mp->hdw);
mp->disconnect_flag = !0;
pvr2_context_run_checks(mp);
} while (0); pvr2_context_exit(mp);
pvr2_hdw_disconnect(mp->hdw);
mp->disconnect_flag = !0;
pvr2_context_notify(mp);
}
void pvr2_channel_init(struct pvr2_channel *cp,struct pvr2_context *mp)
{
pvr2_context_enter(mp);
cp->hdw = mp->hdw;
cp->mc_head = mp;
cp->mc_next = NULL;
......@@ -136,6 +160,7 @@ void pvr2_channel_init(struct pvr2_channel *cp,struct pvr2_context *mp)
mp->mc_first = cp;
}
mp->mc_last = cp;
pvr2_context_exit(mp);
}
......@@ -151,6 +176,7 @@ static void pvr2_channel_disclaim_stream(struct pvr2_channel *cp)
void pvr2_channel_done(struct pvr2_channel *cp)
{
struct pvr2_context *mp = cp->mc_head;
pvr2_context_enter(mp);
pvr2_channel_disclaim_stream(cp);
if (cp->mc_next) {
cp->mc_next->mc_prev = cp->mc_prev;
......@@ -163,6 +189,7 @@ void pvr2_channel_done(struct pvr2_channel *cp)
mp->mc_first = cp->mc_next;
}
cp->hdw = NULL;
pvr2_context_exit(mp);
}
......
......@@ -43,8 +43,10 @@ struct pvr2_context {
struct pvr2_hdw *hdw;
struct pvr2_context_stream video_stream;
struct mutex mutex;
int notify_flag;
int disconnect_flag;
int init_flag;
wait_queue_head_t wait_data;
/* Called after pvr2_context initialization is complete */
void (*setup_func)(struct pvr2_context *);
......@@ -60,9 +62,6 @@ struct pvr2_channel {
void (*check_func)(struct pvr2_channel *);
};
void pvr2_context_enter(struct pvr2_context *);
void pvr2_context_exit(struct pvr2_context *);
struct pvr2_context *pvr2_context_create(struct usb_interface *intf,
const struct usb_device_id *devid,
void (*setup_func)(struct pvr2_context *));
......
......@@ -39,7 +39,7 @@ extern int pvrusb2_debug;
#define PVR2_TRACE_EEPROM (1 << 10) /* eeprom parsing / report */
#define PVR2_TRACE_STRUCT (1 << 11) /* internal struct creation */
#define PVR2_TRACE_OPEN_CLOSE (1 << 12) /* application open / close */
#define PVR2_TRACE_CREG (1 << 13) /* Main critical region entry / exit */
#define PVR2_TRACE_CTXT (1 << 13) /* Main context tracking */
#define PVR2_TRACE_SYSFS (1 << 14) /* Sysfs driven I/O */
#define PVR2_TRACE_FIRMWARE (1 << 15) /* firmware upload actions */
#define PVR2_TRACE_CHIPS (1 << 16) /* chip broadcast operation */
......
......@@ -187,7 +187,6 @@ struct pvr2_hdw {
struct workqueue_struct *workqueue;
struct work_struct workpoll; /* Update driver state */
struct work_struct worki2csync; /* Update i2c clients */
struct work_struct workinit; /* Driver initialization sequence */
/* Video spigot */
struct pvr2_stream *vid_stream;
......
......@@ -221,7 +221,6 @@ static int pvr2_hdw_state_eval(struct pvr2_hdw *);
static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long);
static void pvr2_hdw_worker_i2c(struct work_struct *work);
static void pvr2_hdw_worker_poll(struct work_struct *work);
static void pvr2_hdw_worker_init(struct work_struct *work);
static int pvr2_hdw_wait(struct pvr2_hdw *,int state);
static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *);
static void pvr2_hdw_state_log_state(struct pvr2_hdw *);
......@@ -1816,15 +1815,16 @@ static void pvr2_hdw_setup(struct pvr2_hdw *hdw)
/* Perform second stage initialization. Set callback pointer first so that
we can avoid a possible initialization race (if the kernel thread runs
before the callback has been set). */
void pvr2_hdw_initialize(struct pvr2_hdw *hdw,
void (*callback_func)(void *),
void *callback_data)
int pvr2_hdw_initialize(struct pvr2_hdw *hdw,
void (*callback_func)(void *),
void *callback_data)
{
LOCK_TAKE(hdw->big_lock); do {
hdw->state_data = callback_data;
hdw->state_func = callback_func;
} while (0); LOCK_GIVE(hdw->big_lock);
queue_work(hdw->workqueue,&hdw->workinit);
pvr2_hdw_setup(hdw);
return hdw->flag_init_ok;
}
......@@ -2032,7 +2032,6 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
hdw->workqueue = create_singlethread_workqueue(hdw->name);
INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll);
INIT_WORK(&hdw->worki2csync,pvr2_hdw_worker_i2c);
INIT_WORK(&hdw->workinit,pvr2_hdw_worker_init);
pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s",
hdw->unit_number,hdw->name);
......@@ -2517,15 +2516,6 @@ static void pvr2_hdw_worker_poll(struct work_struct *work)
}
static void pvr2_hdw_worker_init(struct work_struct *work)
{
struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workinit);
LOCK_TAKE(hdw->big_lock); do {
pvr2_hdw_setup(hdw);
} while (0); LOCK_GIVE(hdw->big_lock);
}
static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state)
{
return wait_event_interruptible(
......
......@@ -103,9 +103,9 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
/* Perform second stage initialization, passing in a notification callback
for when the master state changes. */
void pvr2_hdw_initialize(struct pvr2_hdw *,
void (*callback_func)(void *),
void *callback_data);
int pvr2_hdw_initialize(struct pvr2_hdw *,
void (*callback_func)(void *),
void *callback_data);
/* Destroy hardware interaction structure */
void pvr2_hdw_destroy(struct pvr2_hdw *);
......
......@@ -884,7 +884,6 @@ static int pvr2_v4l2_release(struct inode *inode, struct file *file)
{
struct pvr2_v4l2_fh *fhp = file->private_data;
struct pvr2_v4l2 *vp = fhp->vhead;
struct pvr2_context *mp = fhp->vhead->channel.mc_head;
struct pvr2_hdw *hdw = fhp->channel.mc_head->hdw;
pvr2_trace(PVR2_TRACE_OPEN_CLOSE,"pvr2_v4l2_release");
......@@ -901,42 +900,40 @@ static int pvr2_v4l2_release(struct inode *inode, struct file *file)
v4l2_prio_close(&vp->prio, &fhp->prio);
file->private_data = NULL;
pvr2_context_enter(mp); do {
/* Restore the previous input selection, if it makes sense
to do so. */
if (fhp->dev_info->v4l_type == VFL_TYPE_RADIO) {
struct pvr2_ctrl *cp;
int pval;
cp = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT);
pvr2_ctrl_get_value(cp,&pval);
/* Only restore if we're still selecting the radio */
if (pval == PVR2_CVAL_INPUT_RADIO) {
pvr2_ctrl_set_value(cp,fhp->prev_input_val);
pvr2_hdw_commit_ctl(hdw);
}
/* Restore the previous input selection, if it makes sense
to do so. */
if (fhp->dev_info->v4l_type == VFL_TYPE_RADIO) {
struct pvr2_ctrl *cp;
int pval;
cp = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT);
pvr2_ctrl_get_value(cp,&pval);
/* Only restore if we're still selecting the radio */
if (pval == PVR2_CVAL_INPUT_RADIO) {
pvr2_ctrl_set_value(cp,fhp->prev_input_val);
pvr2_hdw_commit_ctl(hdw);
}
}
if (fhp->vnext) {
fhp->vnext->vprev = fhp->vprev;
} else {
vp->vlast = fhp->vprev;
}
if (fhp->vprev) {
fhp->vprev->vnext = fhp->vnext;
} else {
vp->vfirst = fhp->vnext;
}
fhp->vnext = NULL;
fhp->vprev = NULL;
fhp->vhead = NULL;
pvr2_channel_done(&fhp->channel);
pvr2_trace(PVR2_TRACE_STRUCT,
"Destroying pvr_v4l2_fh id=%p",fhp);
kfree(fhp);
if (vp->channel.mc_head->disconnect_flag && !vp->vfirst) {
pvr2_v4l2_destroy_no_lock(vp);
}
} while (0); pvr2_context_exit(mp);
if (fhp->vnext) {
fhp->vnext->vprev = fhp->vprev;
} else {
vp->vlast = fhp->vprev;
}
if (fhp->vprev) {
fhp->vprev->vnext = fhp->vnext;
} else {
vp->vfirst = fhp->vnext;
}
fhp->vnext = NULL;
fhp->vprev = NULL;
fhp->vhead = NULL;
pvr2_channel_done(&fhp->channel);
pvr2_trace(PVR2_TRACE_STRUCT,
"Destroying pvr_v4l2_fh id=%p",fhp);
kfree(fhp);
if (vp->channel.mc_head->disconnect_flag && !vp->vfirst) {
pvr2_v4l2_destroy_no_lock(vp);
}
return 0;
}
......@@ -969,32 +966,30 @@ static int pvr2_v4l2_open(struct inode *inode, struct file *file)
init_waitqueue_head(&fhp->wait_data);
fhp->dev_info = dip;
pvr2_context_enter(vp->channel.mc_head); do {
pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr_v4l2_fh id=%p",fhp);
pvr2_channel_init(&fhp->channel,vp->channel.mc_head);
pvr2_trace(PVR2_TRACE_STRUCT,"Creating pvr_v4l2_fh id=%p",fhp);
pvr2_channel_init(&fhp->channel,vp->channel.mc_head);
fhp->vnext = NULL;
fhp->vprev = vp->vlast;
if (vp->vlast) {
vp->vlast->vnext = fhp;
} else {
vp->vfirst = fhp;
}
vp->vlast = fhp;
fhp->vhead = vp;
/* Opening the /dev/radioX device implies a mode switch.
So execute that here. Note that you can get the
IDENTICAL effect merely by opening the normal video
device and setting the input appropriately. */
if (dip->v4l_type == VFL_TYPE_RADIO) {
struct pvr2_ctrl *cp;
cp = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT);
pvr2_ctrl_get_value(cp,&fhp->prev_input_val);
pvr2_ctrl_set_value(cp,PVR2_CVAL_INPUT_RADIO);
pvr2_hdw_commit_ctl(hdw);
}
} while (0); pvr2_context_exit(vp->channel.mc_head);
fhp->vnext = NULL;
fhp->vprev = vp->vlast;
if (vp->vlast) {
vp->vlast->vnext = fhp;
} else {
vp->vfirst = fhp;
}
vp->vlast = fhp;
fhp->vhead = vp;
/* Opening the /dev/radioX device implies a mode switch.
So execute that here. Note that you can get the
IDENTICAL effect merely by opening the normal video
device and setting the input appropriately. */
if (dip->v4l_type == VFL_TYPE_RADIO) {
struct pvr2_ctrl *cp;
cp = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_INPUT);
pvr2_ctrl_get_value(cp,&fhp->prev_input_val);
pvr2_ctrl_set_value(cp,PVR2_CVAL_INPUT_RADIO);
pvr2_hdw_commit_ctl(hdw);
}
fhp->file = file;
file->private_data = fhp;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment