swiotlb: if swiotlb is full, fall back to a transient memory pool

Try to allocate a transient memory pool if no suitable slots can be found
and the respective SWIOTLB is allowed to grow. The transient pool is just
enough big for this one bounce buffer. It is inserted into a per-device
list of transient memory pools, and it is freed again when the bounce
buffer is unmapped.

Transient memory pools are kept in an RCU list. A memory barrier is
required after adding a new entry, because any address within a transient
buffer must be immediately recognized as belonging to the SWIOTLB, even if
it is passed to another CPU.

Deletion does not require any synchronization beyond RCU ordering
guarantees. After a buffer is unmapped, its physical addresses may no
longer be passed to the DMA API, so the memory range of the corresponding
stale entry in the RCU list never matches. If the memory range gets
allocated again, then it happens only after a RCU quiescent state.

Since bounce buffers can now be allocated from different pools, add a
parameter to swiotlb_alloc_pool() to let the caller know which memory pool
is used. Add swiotlb_find_pool() to find the memory pool corresponding to
an address. This function is now also used by is_swiotlb_buffer(), because
a simple boundary check is no longer sufficient.

The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(),
simplified and enhanced to use coherent memory pools if needed.

Note that this is not the most efficient way to provide a bounce buffer,
but when a DMA buffer can't be mapped, something may (and will) actually
break. At that point it is better to make an allocation, even if it may be
an expensive operation.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

include/linux/device.h

@@ -626,6 +626,8 @@ struct device_physical_location {
  * @dma_mem:	Internal for coherent mem override.
  * @cma_area:	Contiguous memory area for dma allocations
  * @dma_io_tlb_mem: Software IO TLB allocator.  Not for driver use.
+ * @dma_io_tlb_pools:	List of transient swiotlb memory pools.
+ * @dma_io_tlb_lock:	Protects changes to the list of active pools.
  * @archdata:	For arch-specific additions.
  * @of_node:	Associated device tree node.
  * @fwnode:	Associated device node supplied by platform firmware.
@@ -731,6 +733,10 @@ struct device {
 #endif
 #ifdef CONFIG_SWIOTLB
 	struct io_tlb_mem *dma_io_tlb_mem;
+#endif
+#ifdef CONFIG_SWIOTLB_DYNAMIC
+	struct list_head dma_io_tlb_pools;
+	spinlock_t dma_io_tlb_lock;
 #endif
 	/* arch specific additions */
 	struct dev_archdata	archdata;

include/linux/dma-mapping.h

@@ -418,6 +418,8 @@ static inline void dma_sync_sgtable_for_device(struct device *dev,
 #define dma_get_sgtable(d, t, v, h, s) dma_get_sgtable_attrs(d, t, v, h, s, 0)
 #define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, 0)
 
+bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size);
+
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 		dma_addr_t *dma_handle, gfp_t gfp)
 {

include/linux/swiotlb.h

@@ -80,6 +80,9 @@ dma_addr_t swiotlb_map(struct device *dev, phys_addr_t phys,
  * @area_nslabs: Number of slots in each area.
  * @areas:	Array of memory area descriptors.
  * @slots:	Array of slot descriptors.
+ * @node:	Member of the IO TLB memory pool list.
+ * @rcu:	RCU head for swiotlb_dyn_free().
+ * @transient:  %true if transient memory pool.
  */
 struct io_tlb_pool {
 	phys_addr_t start;
@@ -91,6 +94,11 @@ struct io_tlb_pool {
 	unsigned int area_nslabs;
 	struct io_tlb_area *areas;
 	struct io_tlb_slot *slots;
+#ifdef CONFIG_SWIOTLB_DYNAMIC
+	struct list_head node;
+	struct rcu_head rcu;
+	bool transient;
+#endif
 };
 
 /**
@@ -122,6 +130,20 @@ struct io_tlb_mem {
 #endif
 };
 
+#ifdef CONFIG_SWIOTLB_DYNAMIC
+
+struct io_tlb_pool *swiotlb_find_pool(struct device *dev, phys_addr_t paddr);
+
+#else
+
+static inline struct io_tlb_pool *swiotlb_find_pool(struct device *dev,
+						    phys_addr_t paddr)
+{
+	return &dev->dma_io_tlb_mem->defpool;
+}
+
+#endif
+
 /**
  * is_swiotlb_buffer() - check if a physical address belongs to a swiotlb
  * @dev:        Device which has mapped the buffer.
@@ -137,7 +159,12 @@ static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr)
 {
 	struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
 
-	return mem && paddr >= mem->defpool.start && paddr < mem->defpool.end;
+	if (!mem)
+		return false;
+
+	if (IS_ENABLED(CONFIG_SWIOTLB_DYNAMIC))
+		return swiotlb_find_pool(dev, paddr);
+	return paddr >= mem->defpool.start && paddr < mem->defpool.end;
 }
 
 static inline bool is_swiotlb_force_bounce(struct device *dev)

kernel/dma/direct.c

@@ -66,7 +66,7 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
 	return 0;
 }
 
-static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
+bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size)
 {
 	dma_addr_t dma_addr = phys_to_dma_direct(dev, phys);