i2c: exynos5: fix arbitration lost handling

In case of arbitration lost adequate interrupt sometimes is not signaled.
As a result transfer timeouts and is not retried, as it should. To avoid
such cases code is added to check transaction status in case of every
interrupt.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-exynos5.c

@@ -130,12 +130,32 @@
 /* I2C_TRANS_STATUS register bits */
 #define HSI2C_MASTER_BUSY			(1u << 17)
 #define HSI2C_SLAVE_BUSY			(1u << 16)
+
+/* I2C_TRANS_STATUS register bits for Exynos5 variant */
 #define HSI2C_TIMEOUT_AUTO			(1u << 4)
 #define HSI2C_NO_DEV				(1u << 3)
 #define HSI2C_NO_DEV_ACK			(1u << 2)
 #define HSI2C_TRANS_ABORT			(1u << 1)
 #define HSI2C_TRANS_DONE			(1u << 0)
 
+/* I2C_TRANS_STATUS register bits for Exynos7 variant */
+#define HSI2C_MASTER_ST_MASK			0xf
+#define HSI2C_MASTER_ST_IDLE			0x0
+#define HSI2C_MASTER_ST_START			0x1
+#define HSI2C_MASTER_ST_RESTART			0x2
+#define HSI2C_MASTER_ST_STOP			0x3
+#define HSI2C_MASTER_ST_MASTER_ID		0x4
+#define HSI2C_MASTER_ST_ADDR0			0x5
+#define HSI2C_MASTER_ST_ADDR1			0x6
+#define HSI2C_MASTER_ST_ADDR2			0x7
+#define HSI2C_MASTER_ST_ADDR_SR			0x8
+#define HSI2C_MASTER_ST_READ			0x9
+#define HSI2C_MASTER_ST_WRITE			0xa
+#define HSI2C_MASTER_ST_NO_ACK			0xb
+#define HSI2C_MASTER_ST_LOSE			0xc
+#define HSI2C_MASTER_ST_WAIT			0xd
+#define HSI2C_MASTER_ST_WAIT_CMD		0xe
+
 /* I2C_ADDR register bits */
 #define HSI2C_SLV_ADDR_SLV(x)			((x & 0x3ff) << 0)
 #define HSI2C_SLV_ADDR_MAS(x)			((x & 0x3ff) << 10)
@@ -437,6 +457,7 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
 
 	int_status = readl(i2c->regs + HSI2C_INT_STATUS);
 	writel(int_status, i2c->regs + HSI2C_INT_STATUS);
+	trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
 
 	/* handle interrupt related to the transfer status */
 	if (i2c->variant->hw == HSI2C_EXYNOS7) {
@@ -460,8 +481,12 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
 			i2c->state = -ETIMEDOUT;
 			goto stop;
 		}
+
+		if ((trans_status & HSI2C_MASTER_ST_MASK) == HSI2C_MASTER_ST_LOSE) {
+			i2c->state = -EAGAIN;
+			goto stop;
+		}
 	} else if (int_status & HSI2C_INT_I2C) {
-		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
 		if (trans_status & HSI2C_NO_DEV_ACK) {
 			dev_dbg(i2c->dev, "No ACK from device\n");
 			i2c->state = -ENXIO;