Commit 79e1932f authored by Chang S. Bae's avatar Chang S. Bae Committed by Thomas Gleixner

x86/entry/64: Introduce the FIND_PERCPU_BASE macro

GSBASE is used to find per-CPU data in the kernel. But when GSBASE is
unknown, the per-CPU base can be found from the per_cpu_offset table with a
CPU NR.  The CPU NR is extracted from the limit field of the CPUNODE entry
in GDT, or by the RDPID instruction. This is a prerequisite for using
FSGSBASE in the low level entry code.

Also, add the GAS-compatible RDPID macro as binutils 2.21 do not support
it. Support is added in version 2.27.

[ tglx: Massaged changelog ]
Suggested-by: default avatarH. Peter Anvin <hpa@zytor.com>
Signed-off-by: default avatarChang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/1557309753-24073-12-git-send-email-chang.seok.bae@intel.com
parent 1d07316b
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
#include <asm/percpu.h> #include <asm/percpu.h>
#include <asm/asm-offsets.h> #include <asm/asm-offsets.h>
#include <asm/processor-flags.h> #include <asm/processor-flags.h>
#include <asm/inst.h>
/* /*
...@@ -345,6 +346,39 @@ For 32-bit we have the following conventions - kernel is built with ...@@ -345,6 +346,39 @@ For 32-bit we have the following conventions - kernel is built with
#endif #endif
.endm .endm
#ifdef CONFIG_SMP
/*
* CPU/node NR is loaded from the limit (size) field of a special segment
* descriptor entry in GDT.
*/
.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
movq $__CPUNODE_SEG, \reg
lsl \reg, \reg
.endm
/*
* Fetch the per-CPU GSBASE value for this processor and put it in @reg.
* We normally use %gs for accessing per-CPU data, but we are setting up
* %gs here and obviously can not use %gs itself to access per-CPU data.
*/
.macro GET_PERCPU_BASE reg:req
ALTERNATIVE \
"LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
"RDPID \reg", \
X86_FEATURE_RDPID
andq $VDSO_CPUNODE_MASK, \reg
movq __per_cpu_offset(, \reg, 8), \reg
.endm
#else
.macro GET_PERCPU_BASE reg:req
movq pcpu_unit_offsets(%rip), \reg
.endm
#endif /* CONFIG_SMP */
/* /*
* This does 'call enter_from_user_mode' unless we can avoid it based on * This does 'call enter_from_user_mode' unless we can avoid it based on
* kernel config or using the static jump infrastructure. * kernel config or using the static jump infrastructure.
......
...@@ -306,6 +306,21 @@ ...@@ -306,6 +306,21 @@
.endif .endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2 MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm .endm
.macro RDPID opd
REG_TYPE rdpid_opd_type \opd
.if rdpid_opd_type == REG_TYPE_R64
R64_NUM rdpid_opd \opd
.else
R32_NUM rdpid_opd \opd
.endif
.byte 0xf3
.if rdpid_opd > 7
PFX_REX rdpid_opd 0
.endif
.byte 0x0f, 0xc7
MODRM 0xc0 rdpid_opd 0x7
.endm
#endif #endif
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment