Commit 79e3a5bd authored by Sean Nyekjaer's avatar Sean Nyekjaer Committed by Jonathan Cameron

iio: accel: fxls8962af: add hw buffered sampling

When buffered sampling is enabled, the accelerometer will dump data into
the internal fifo and interrupt at watermark. Then the driver flushes
all data to the iio buffer.
As the accelerometer doesn't have internal timestamps, they are
approximated between the current and last interrupt.
Signed-off-by: default avatarSean Nyekjaer <sean@geanix.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 9ab2c60e
......@@ -20,13 +20,16 @@
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/sysfs.h>
#include "fxls8962af.h"
#define FXLS8962AF_INT_STATUS 0x00
#define FXLS8962AF_INT_STATUS_SRC_BOOT BIT(0)
#define FXLS8962AF_INT_STATUS_SRC_BUF BIT(5)
#define FXLS8962AF_INT_STATUS_SRC_DRDY BIT(7)
#define FXLS8962AF_TEMP_OUT 0x01
#define FXLS8962AF_VECM_LSB 0x02
......@@ -34,6 +37,9 @@
#define FXLS8962AF_OUT_Y_LSB 0x06
#define FXLS8962AF_OUT_Z_LSB 0x08
#define FXLS8962AF_BUF_STATUS 0x0b
#define FXLS8962AF_BUF_STATUS_BUF_CNT GENMASK(5, 0)
#define FXLS8962AF_BUF_STATUS_BUF_OVF BIT(6)
#define FXLS8962AF_BUF_STATUS_BUF_WMRK BIT(7)
#define FXLS8962AF_BUF_X_LSB 0x0c
#define FXLS8962AF_BUF_Y_LSB 0x0e
#define FXLS8962AF_BUF_Z_LSB 0x10
......@@ -66,6 +72,7 @@
#define FXLS8962AF_ASLP_COUNT_LSB 0x1e
#define FXLS8962AF_INT_EN 0x20
#define FXLS8962AF_INT_EN_BUF_EN BIT(6)
#define FXLS8962AF_INT_PIN_SEL 0x21
#define FXLS8962AF_INT_PIN_SEL_MASK GENMASK(7, 0)
#define FXLS8962AF_INT_PIN_SEL_INT1 0x00
......@@ -76,7 +83,10 @@
#define FXLS8962AF_OFF_Z 0x24
#define FXLS8962AF_BUF_CONFIG1 0x26
#define FXLS8962AF_BC1_BUF_MODE_MASK GENMASK(6, 5)
#define FXLS8962AF_BC1_BUF_MODE_PREP(x) FIELD_PREP(FXLS8962AF_BC1_BUF_MODE_MASK, (x))
#define FXLS8962AF_BUF_CONFIG2 0x27
#define FXLS8962AF_BUF_CONFIG2_BUF_WMRK GENMASK(5, 0)
#define FXLS8962AF_ORIENT_STATUS 0x28
#define FXLS8962AF_ORIENT_CONFIG 0x29
......@@ -106,6 +116,7 @@
#define FXLS8962AF_AUTO_SUSPEND_DELAY_MS 2000
#define FXLS8962AF_FIFO_LENGTH 32
#define FXLS8962AF_SCALE_TABLE_LEN 4
#define FXLS8962AF_SAMP_FREQ_TABLE_LEN 13
......@@ -133,7 +144,13 @@ struct fxls8962af_data {
struct regmap *regmap;
const struct fxls8962af_chip_info *chip_info;
struct regulator *vdd_reg;
struct {
__le16 channels[3];
s64 ts __aligned(8);
} scan;
int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
struct iio_mount_matrix orientation;
u8 watermark;
};
const struct regmap_config fxls8962af_regmap_conf = {
......@@ -433,6 +450,18 @@ static int fxls8962af_write_raw(struct iio_dev *indio_dev,
}
}
static int fxls8962af_set_watermark(struct iio_dev *indio_dev, unsigned val)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
if (val > FXLS8962AF_FIFO_LENGTH)
val = FXLS8962AF_FIFO_LENGTH;
data->watermark = val;
return 0;
}
#define FXLS8962AF_CHANNEL(axis, reg, idx) { \
.type = IIO_ACCEL, \
.address = reg, \
......@@ -493,6 +522,7 @@ static const struct iio_info fxls8962af_info = {
.write_raw = &fxls8962af_write_raw,
.write_raw_get_fmt = fxls8962af_write_raw_get_fmt,
.read_avail = fxls8962af_read_avail,
.hwfifo_set_watermark = fxls8962af_set_watermark,
};
static int fxls8962af_reset(struct fxls8962af_data *data)
......@@ -517,6 +547,157 @@ static int fxls8962af_reset(struct fxls8962af_data *data)
return ret;
}
static int __fxls8962af_fifo_set_mode(struct fxls8962af_data *data, bool onoff)
{
int ret;
/* Enable watermark at max fifo size */
ret = regmap_update_bits(data->regmap, FXLS8962AF_BUF_CONFIG2,
FXLS8962AF_BUF_CONFIG2_BUF_WMRK,
data->watermark);
if (ret)
return ret;
return regmap_update_bits(data->regmap, FXLS8962AF_BUF_CONFIG1,
FXLS8962AF_BC1_BUF_MODE_MASK,
FXLS8962AF_BC1_BUF_MODE_PREP(onoff));
}
static int fxls8962af_buffer_preenable(struct iio_dev *indio_dev)
{
return fxls8962af_power_on(iio_priv(indio_dev));
}
static int fxls8962af_buffer_postenable(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret;
fxls8962af_standby(data);
/* Enable buffer interrupt */
ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN,
FXLS8962AF_INT_EN_BUF_EN,
FXLS8962AF_INT_EN_BUF_EN);
if (ret)
return ret;
ret = __fxls8962af_fifo_set_mode(data, true);
fxls8962af_active(data);
return ret;
}
static int fxls8962af_buffer_predisable(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
int ret;
fxls8962af_standby(data);
/* Disable buffer interrupt */
ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN,
FXLS8962AF_INT_EN_BUF_EN, 0);
if (ret)
return ret;
ret = __fxls8962af_fifo_set_mode(data, false);
fxls8962af_active(data);
return ret;
}
static int fxls8962af_buffer_postdisable(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
return fxls8962af_power_off(data);
}
static const struct iio_buffer_setup_ops fxls8962af_buffer_ops = {
.preenable = fxls8962af_buffer_preenable,
.postenable = fxls8962af_buffer_postenable,
.predisable = fxls8962af_buffer_predisable,
.postdisable = fxls8962af_buffer_postdisable,
};
static int fxls8962af_fifo_transfer(struct fxls8962af_data *data,
u16 *buffer, int samples)
{
struct device *dev = regmap_get_device(data->regmap);
int sample_length = 3 * sizeof(*buffer);
int ret;
int total_length = samples * sample_length;
ret = regmap_raw_read(data->regmap, FXLS8962AF_BUF_X_LSB, buffer,
total_length);
if (ret)
dev_err(dev, "Error transferring data from fifo: %d\n", ret);
return ret;
}
static int fxls8962af_fifo_flush(struct iio_dev *indio_dev)
{
struct fxls8962af_data *data = iio_priv(indio_dev);
struct device *dev = regmap_get_device(data->regmap);
u16 buffer[FXLS8962AF_FIFO_LENGTH * 3];
uint64_t sample_period;
unsigned int reg;
int64_t tstamp;
int ret, i;
u8 count;
ret = regmap_read(data->regmap, FXLS8962AF_BUF_STATUS, &reg);
if (ret)
return ret;
if (reg & FXLS8962AF_BUF_STATUS_BUF_OVF) {
dev_err(dev, "Buffer overflow");
return -EOVERFLOW;
}
count = reg & FXLS8962AF_BUF_STATUS_BUF_CNT;
if (!count)
return 0;
data->old_timestamp = data->timestamp;
data->timestamp = iio_get_time_ns(indio_dev);
/*
* Approximate timestamps for each of the sample based on the sampling,
* frequency, timestamp for last sample and number of samples.
*/
sample_period = (data->timestamp - data->old_timestamp);
do_div(sample_period, count);
tstamp = data->timestamp - (count - 1) * sample_period;
ret = fxls8962af_fifo_transfer(data, buffer, count);
if (ret)
return ret;
/* Demux hw FIFO into kfifo. */
for (i = 0; i < count; i++) {
int j, bit;
j = 0;
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength) {
memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit],
sizeof(data->scan.channels[0]));
}
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
tstamp);
tstamp += sample_period;
}
return count;
}
static irqreturn_t fxls8962af_interrupt(int irq, void *p)
{
struct iio_dev *indio_dev = p;
......@@ -528,6 +709,14 @@ static irqreturn_t fxls8962af_interrupt(int irq, void *p)
if (ret)
return IRQ_NONE;
if (reg & FXLS8962AF_INT_STATUS_SRC_BUF) {
ret = fxls8962af_fifo_flush(indio_dev);
if (ret)
return IRQ_NONE;
return IRQ_HANDLED;
}
return IRQ_NONE;
}
......@@ -694,6 +883,12 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
ret = fxls8962af_irq_setup(indio_dev, irq);
if (ret)
return ret;
ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
INDIO_BUFFER_SOFTWARE,
&fxls8962af_buffer_ops);
if (ret)
return ret;
}
ret = pm_runtime_set_active(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment