Commit 7a71c8aa authored by Radu Pirea (NXP OSS)'s avatar Radu Pirea (NXP OSS) Committed by David S. Miller

phy: nxp-c45-tja11xx: add extts and perout support

Add support for external timestamp and periodic signal output.
TJA1103 have one periodic signal and one external time stamp signal that
can be multiplexed on all 11 gpio pins.

The periodic signal can be only enabled or disabled. Have no start time
and if is enabled will be generated with a period of one second in sync
with the LTC seconds counter. The phase change is possible only with a
half of a second.

The external timestamp signal has no interrupt and no valid bit and
that's why the timestamps are handled by polling in .do_aux_work.
Signed-off-by: default avatarRadu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dfb55f99
...@@ -97,6 +97,11 @@ ...@@ -97,6 +97,11 @@
#define VEND1_TX_IPG_LENGTH 0xAFD1 #define VEND1_TX_IPG_LENGTH 0xAFD1
#define COUNTER_EN BIT(15) #define COUNTER_EN BIT(15)
#define VEND1_PTP_CONFIG 0x1102
#define EXT_TRG_EDGE BIT(1)
#define PPS_OUT_POL BIT(2)
#define PPS_OUT_EN BIT(3)
#define VEND1_LTC_LOAD_CTRL 0x1105 #define VEND1_LTC_LOAD_CTRL 0x1105
#define READ_LTC BIT(2) #define READ_LTC BIT(2)
#define LOAD_LTC BIT(0) #define LOAD_LTC BIT(0)
...@@ -132,6 +137,13 @@ ...@@ -132,6 +137,13 @@
#define VEND1_EGR_RING_DATA_3 0x1151 #define VEND1_EGR_RING_DATA_3 0x1151
#define VEND1_EGR_RING_CTRL 0x1154 #define VEND1_EGR_RING_CTRL 0x1154
#define VEND1_EXT_TRG_TS_DATA_0 0x1121
#define VEND1_EXT_TRG_TS_DATA_1 0x1122
#define VEND1_EXT_TRG_TS_DATA_2 0x1123
#define VEND1_EXT_TRG_TS_DATA_3 0x1124
#define VEND1_EXT_TRG_TS_DATA_4 0x1125
#define VEND1_EXT_TRG_TS_CTRL 0x1126
#define RING_DATA_0_DOMAIN_NUMBER GENMASK(7, 0) #define RING_DATA_0_DOMAIN_NUMBER GENMASK(7, 0)
#define RING_DATA_0_MSG_TYPE GENMASK(11, 8) #define RING_DATA_0_MSG_TYPE GENMASK(11, 8)
#define RING_DATA_0_SEC_4_2 GENMASK(14, 2) #define RING_DATA_0_SEC_4_2 GENMASK(14, 2)
...@@ -162,6 +174,17 @@ ...@@ -162,6 +174,17 @@
#define VEND1_RX_PIPE_DLY_NS 0x114B #define VEND1_RX_PIPE_DLY_NS 0x114B
#define VEND1_RX_PIPEDLY_SUBNS 0x114C #define VEND1_RX_PIPEDLY_SUBNS 0x114C
#define VEND1_GPIO_FUNC_CONFIG_BASE 0x2C40
#define GPIO_FUNC_EN BIT(15)
#define GPIO_FUNC_PTP BIT(6)
#define GPIO_SIGNAL_PTP_TRIGGER 0x01
#define GPIO_SIGNAL_PPS_OUT 0x12
#define GPIO_DISABLE 0
#define GPIO_PPS_OUT_CFG (GPIO_FUNC_EN | GPIO_FUNC_PTP | \
GPIO_SIGNAL_PPS_OUT)
#define GPIO_EXTTS_OUT_CFG (GPIO_FUNC_EN | GPIO_FUNC_PTP | \
GPIO_SIGNAL_PTP_TRIGGER)
#define RGMII_PERIOD_PS 8000U #define RGMII_PERIOD_PS 8000U
#define PS_PER_DEGREE div_u64(RGMII_PERIOD_PS, 360) #define PS_PER_DEGREE div_u64(RGMII_PERIOD_PS, 360)
#define MIN_ID_PS 1644U #define MIN_ID_PS 1644U
...@@ -199,6 +222,9 @@ struct nxp_c45_phy { ...@@ -199,6 +222,9 @@ struct nxp_c45_phy {
int hwts_rx; int hwts_rx;
u32 tx_delay; u32 tx_delay;
u32 rx_delay; u32 rx_delay;
struct timespec64 extts_ts;
int extts_index;
bool extts;
}; };
struct nxp_c45_phy_stats { struct nxp_c45_phy_stats {
...@@ -339,6 +365,21 @@ static bool nxp_c45_match_ts(struct ptp_header *header, ...@@ -339,6 +365,21 @@ static bool nxp_c45_match_ts(struct ptp_header *header,
header->domain_number == hwts->domain_number; header->domain_number == hwts->domain_number;
} }
static void nxp_c45_get_extts(struct nxp_c45_phy *priv,
struct timespec64 *extts)
{
extts->tv_nsec = phy_read_mmd(priv->phydev, MDIO_MMD_VEND1,
VEND1_EXT_TRG_TS_DATA_0);
extts->tv_nsec |= phy_read_mmd(priv->phydev, MDIO_MMD_VEND1,
VEND1_EXT_TRG_TS_DATA_1) << 16;
extts->tv_sec = phy_read_mmd(priv->phydev, MDIO_MMD_VEND1,
VEND1_EXT_TRG_TS_DATA_2);
extts->tv_sec |= phy_read_mmd(priv->phydev, MDIO_MMD_VEND1,
VEND1_EXT_TRG_TS_DATA_3) << 16;
phy_write_mmd(priv->phydev, MDIO_MMD_VEND1, VEND1_EXT_TRG_TS_CTRL,
RING_DONE);
}
static bool nxp_c45_get_hwtxts(struct nxp_c45_phy *priv, static bool nxp_c45_get_hwtxts(struct nxp_c45_phy *priv,
struct nxp_c45_hwts *hwts) struct nxp_c45_hwts *hwts)
{ {
...@@ -409,6 +450,7 @@ static long nxp_c45_do_aux_work(struct ptp_clock_info *ptp) ...@@ -409,6 +450,7 @@ static long nxp_c45_do_aux_work(struct ptp_clock_info *ptp)
struct nxp_c45_phy *priv = container_of(ptp, struct nxp_c45_phy, caps); struct nxp_c45_phy *priv = container_of(ptp, struct nxp_c45_phy, caps);
bool poll_txts = nxp_c45_poll_txts(priv->phydev); bool poll_txts = nxp_c45_poll_txts(priv->phydev);
struct skb_shared_hwtstamps *shhwtstamps_rx; struct skb_shared_hwtstamps *shhwtstamps_rx;
struct ptp_clock_event event;
struct nxp_c45_hwts hwts; struct nxp_c45_hwts hwts;
bool reschedule = false; bool reschedule = false;
struct timespec64 ts; struct timespec64 ts;
...@@ -439,9 +481,181 @@ static long nxp_c45_do_aux_work(struct ptp_clock_info *ptp) ...@@ -439,9 +481,181 @@ static long nxp_c45_do_aux_work(struct ptp_clock_info *ptp)
netif_rx_ni(skb); netif_rx_ni(skb);
} }
if (priv->extts) {
nxp_c45_get_extts(priv, &ts);
if (timespec64_compare(&ts, &priv->extts_ts) != 0) {
priv->extts_ts = ts;
event.index = priv->extts_index;
event.type = PTP_CLOCK_EXTTS;
event.timestamp = ns_to_ktime(timespec64_to_ns(&ts));
ptp_clock_event(priv->ptp_clock, &event);
}
reschedule = true;
}
return reschedule ? 1 : -1; return reschedule ? 1 : -1;
} }
static void nxp_c45_gpio_config(struct nxp_c45_phy *priv,
int pin, u16 pin_cfg)
{
struct phy_device *phydev = priv->phydev;
phy_write_mmd(phydev, MDIO_MMD_VEND1,
VEND1_GPIO_FUNC_CONFIG_BASE + pin, pin_cfg);
}
static int nxp_c45_perout_enable(struct nxp_c45_phy *priv,
struct ptp_perout_request *perout, int on)
{
struct phy_device *phydev = priv->phydev;
int pin;
if (perout->flags & ~PTP_PEROUT_PHASE)
return -EOPNOTSUPP;
pin = ptp_find_pin(priv->ptp_clock, PTP_PF_PEROUT, perout->index);
if (pin < 0)
return pin;
if (!on) {
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PTP_CONFIG,
PPS_OUT_EN);
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PTP_CONFIG,
PPS_OUT_POL);
nxp_c45_gpio_config(priv, pin, GPIO_DISABLE);
return 0;
}
/* The PPS signal is fixed to 1 second and is always generated when the
* seconds counter is incremented. The start time is not configurable.
* If the clock is adjusted, the PPS signal is automatically readjusted.
*/
if (perout->period.sec != 1 || perout->period.nsec != 0) {
phydev_warn(phydev, "The period can be set only to 1 second.");
return -EINVAL;
}
if (!(perout->flags & PTP_PEROUT_PHASE)) {
if (perout->start.sec != 0 || perout->start.nsec != 0) {
phydev_warn(phydev, "The start time is not configurable. Should be set to 0 seconds and 0 nanoseconds.");
return -EINVAL;
}
} else {
if (perout->phase.nsec != 0 &&
perout->phase.nsec != (NSEC_PER_SEC >> 1)) {
phydev_warn(phydev, "The phase can be set only to 0 or 500000000 nanoseconds.");
return -EINVAL;
}
if (perout->phase.nsec == 0)
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
VEND1_PTP_CONFIG, PPS_OUT_POL);
else
phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
VEND1_PTP_CONFIG, PPS_OUT_POL);
}
nxp_c45_gpio_config(priv, pin, GPIO_PPS_OUT_CFG);
phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PTP_CONFIG, PPS_OUT_EN);
return 0;
}
static int nxp_c45_extts_enable(struct nxp_c45_phy *priv,
struct ptp_extts_request *extts, int on)
{
int pin;
if (extts->flags & ~(PTP_ENABLE_FEATURE |
PTP_RISING_EDGE |
PTP_FALLING_EDGE |
PTP_STRICT_FLAGS))
return -EOPNOTSUPP;
/* Sampling on both edges is not supported */
if ((extts->flags & PTP_RISING_EDGE) &&
(extts->flags & PTP_FALLING_EDGE))
return -EOPNOTSUPP;
pin = ptp_find_pin(priv->ptp_clock, PTP_PF_EXTTS, extts->index);
if (pin < 0)
return pin;
if (!on) {
nxp_c45_gpio_config(priv, pin, GPIO_DISABLE);
priv->extts = false;
return 0;
}
if (extts->flags & PTP_RISING_EDGE)
phy_clear_bits_mmd(priv->phydev, MDIO_MMD_VEND1,
VEND1_PTP_CONFIG, EXT_TRG_EDGE);
if (extts->flags & PTP_FALLING_EDGE)
phy_set_bits_mmd(priv->phydev, MDIO_MMD_VEND1,
VEND1_PTP_CONFIG, EXT_TRG_EDGE);
nxp_c45_gpio_config(priv, pin, GPIO_EXTTS_OUT_CFG);
priv->extts = true;
priv->extts_index = extts->index;
ptp_schedule_worker(priv->ptp_clock, 0);
return 0;
}
static int nxp_c45_ptp_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *req, int on)
{
struct nxp_c45_phy *priv = container_of(ptp, struct nxp_c45_phy, caps);
switch (req->type) {
case PTP_CLK_REQ_EXTTS:
return nxp_c45_extts_enable(priv, &req->extts, on);
case PTP_CLK_REQ_PEROUT:
return nxp_c45_perout_enable(priv, &req->perout, on);
default:
return -EOPNOTSUPP;
}
}
static struct ptp_pin_desc nxp_c45_ptp_pins[] = {
{ "nxp_c45_gpio0", 0, PTP_PF_NONE},
{ "nxp_c45_gpio1", 1, PTP_PF_NONE},
{ "nxp_c45_gpio2", 2, PTP_PF_NONE},
{ "nxp_c45_gpio3", 3, PTP_PF_NONE},
{ "nxp_c45_gpio4", 4, PTP_PF_NONE},
{ "nxp_c45_gpio5", 5, PTP_PF_NONE},
{ "nxp_c45_gpio6", 6, PTP_PF_NONE},
{ "nxp_c45_gpio7", 7, PTP_PF_NONE},
{ "nxp_c45_gpio8", 8, PTP_PF_NONE},
{ "nxp_c45_gpio9", 9, PTP_PF_NONE},
{ "nxp_c45_gpio10", 10, PTP_PF_NONE},
{ "nxp_c45_gpio11", 11, PTP_PF_NONE},
};
static int nxp_c45_ptp_verify_pin(struct ptp_clock_info *ptp, unsigned int pin,
enum ptp_pin_function func, unsigned int chan)
{
if (pin >= ARRAY_SIZE(nxp_c45_ptp_pins))
return -EINVAL;
switch (func) {
case PTP_PF_NONE:
case PTP_PF_PEROUT:
case PTP_PF_EXTTS:
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int nxp_c45_init_ptp_clock(struct nxp_c45_phy *priv) static int nxp_c45_init_ptp_clock(struct nxp_c45_phy *priv)
{ {
priv->caps = (struct ptp_clock_info) { priv->caps = (struct ptp_clock_info) {
...@@ -452,7 +666,13 @@ static int nxp_c45_init_ptp_clock(struct nxp_c45_phy *priv) ...@@ -452,7 +666,13 @@ static int nxp_c45_init_ptp_clock(struct nxp_c45_phy *priv)
.adjtime = nxp_c45_ptp_adjtime, .adjtime = nxp_c45_ptp_adjtime,
.gettimex64 = nxp_c45_ptp_gettimex64, .gettimex64 = nxp_c45_ptp_gettimex64,
.settime64 = nxp_c45_ptp_settime64, .settime64 = nxp_c45_ptp_settime64,
.enable = nxp_c45_ptp_enable,
.verify = nxp_c45_ptp_verify_pin,
.do_aux_work = nxp_c45_do_aux_work, .do_aux_work = nxp_c45_do_aux_work,
.pin_config = nxp_c45_ptp_pins,
.n_pins = ARRAY_SIZE(nxp_c45_ptp_pins),
.n_ext_ts = 1,
.n_per_out = 1,
}; };
priv->ptp_clock = ptp_clock_register(&priv->caps, priv->ptp_clock = ptp_clock_register(&priv->caps,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment