usb: musb: remove duplicated port mode enum

include/linux/usb/musb.h already defines enum for musb port mode, so
remove the duplicate in musb_core.h and use the definition in musb.h.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/musb/musb_core.c

@@ -1038,7 +1038,7 @@ void musb_start(struct musb *musb)
 	 * (b) vbus present/connect IRQ, peripheral mode;
 	 * (c) peripheral initiates, using SRP
 	 */
-	if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+	if (musb->port_mode != MUSB_HOST &&
 			musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
 			(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
 		musb->is_active = 1;
@@ -2323,19 +2323,19 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	}
 
 	switch (musb->port_mode) {
-	case MUSB_PORT_MODE_HOST:
+	case MUSB_HOST:
 		status = musb_host_setup(musb, plat->power);
 		if (status < 0)
 			goto fail3;
 		status = musb_platform_set_mode(musb, MUSB_HOST);
 		break;
-	case MUSB_PORT_MODE_GADGET:
+	case MUSB_PERIPHERAL:
 		status = musb_gadget_setup(musb);
 		if (status < 0)
 			goto fail3;
 		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
 		break;
-	case MUSB_PORT_MODE_DUAL_ROLE:
+	case MUSB_OTG:
 		status = musb_host_setup(musb, plat->power);
 		if (status < 0)
 			goto fail3;

drivers/usb/musb/musb_core.h

@@ -53,12 +53,6 @@ struct musb_ep;
 #define is_peripheral_active(m)		(!(m)->is_host)
 #define is_host_active(m)		((m)->is_host)
 
-enum {
-	MUSB_PORT_MODE_HOST	= 1,
-	MUSB_PORT_MODE_GADGET,
-	MUSB_PORT_MODE_DUAL_ROLE,
-};
-
 /****************************** CONSTANTS ********************************/
 
 #ifndef MUSB_C_NUM_EPS
@@ -351,7 +345,7 @@ struct musb {
 
 	u8			min_power;	/* vbus for periph, in mA/2 */
 
-	int			port_mode;	/* MUSB_PORT_MODE_* */
+	enum musb_mode		port_mode;
 	bool			session;
 	unsigned long		quirk_retries;
 	bool			is_host;

drivers/usb/musb/musb_dsps.c

@@ -183,7 +183,7 @@ static void dsps_musb_enable(struct musb *musb)
 	musb_writel(reg_base, wrp->coreintr_set, coremask);
 	/* start polling for ID change in dual-role idle mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
-			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+			musb->port_mode == MUSB_OTG)
 		dsps_mod_timer(glue, -1);
 }
 
@@ -231,7 +231,7 @@ static int dsps_check_status(struct musb *musb, void *unused)
 		break;
 	case OTG_STATE_A_WAIT_BCON:
 		/* keep VBUS on for host-only mode */
-		if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+		if (musb->port_mode == MUSB_HOST) {
 			dsps_mod_timer_optional(glue);
 			break;
 		}
@@ -1028,7 +1028,7 @@ static int dsps_resume(struct device *dev)
 	musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
 	musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
-	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+	    musb->port_mode == MUSB_OTG)
 		dsps_mod_timer(glue, -1);
 
 	pm_runtime_put(dev);

drivers/usb/musb/musb_gadget.c

@@ -1823,7 +1823,7 @@ int musb_gadget_setup(struct musb *musb)
 
 void musb_gadget_cleanup(struct musb *musb)
 {
-	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+	if (musb->port_mode == MUSB_HOST)
 		return;
 
 	cancel_delayed_work_sync(&musb->gadget_work);

drivers/usb/musb/musb_host.c

@@ -2735,7 +2735,7 @@ int musb_host_alloc(struct musb *musb)
 
 void musb_host_cleanup(struct musb *musb)
 {
-	if (musb->port_mode == MUSB_PORT_MODE_GADGET)
+	if (musb->port_mode == MUSB_PERIPHERAL)
 		return;
 	usb_remove_hcd(musb->hcd);
 }
@@ -2750,7 +2750,7 @@ int musb_host_setup(struct musb *musb, int power_budget)
 	int ret;
 	struct usb_hcd *hcd = musb->hcd;
 
-	if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+	if (musb->port_mode == MUSB_HOST) {
 		MUSB_HST_MODE(musb);
 		musb->xceiv->otg->default_a = 1;
 		musb->xceiv->otg->state = OTG_STATE_A_IDLE;

drivers/usb/musb/musb_virthub.c

@@ -254,7 +254,7 @@ static int musb_has_gadget(struct musb *musb)
 #ifdef CONFIG_USB_MUSB_HOST
 	return 1;
 #else
-	return musb->port_mode == MUSB_PORT_MODE_HOST;
+	return musb->port_mode == MUSB_HOST;
 #endif
 }
 

drivers/usb/musb/sunxi.c

@@ -347,7 +347,7 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
 	if (glue->phy_mode == new_mode)
 		return 0;
 
-	if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) {
+	if (musb->port_mode != MUSB_OTG) {
 		dev_err(musb->controller->parent,
 			"Error changing modes is only supported in dual role mode\n");
 		return -EINVAL;
@@ -690,19 +690,19 @@ static int sunxi_musb_probe(struct platform_device *pdev)
 	switch (usb_get_dr_mode(&pdev->dev)) {
 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
 	case USB_DR_MODE_HOST:
-		pdata.mode = MUSB_PORT_MODE_HOST;
+		pdata.mode = MUSB_HOST;
 		glue->phy_mode = PHY_MODE_USB_HOST;
 		break;
 #endif
 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
 	case USB_DR_MODE_PERIPHERAL:
-		pdata.mode = MUSB_PORT_MODE_GADGET;
+		pdata.mode = MUSB_PERIPHERAL;
 		glue->phy_mode = PHY_MODE_USB_DEVICE;
 		break;
 #endif
 #ifdef CONFIG_USB_MUSB_DUAL_ROLE
 	case USB_DR_MODE_OTG:
-		pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
+		pdata.mode = MUSB_OTG;
 		glue->phy_mode = PHY_MODE_USB_OTG;
 		break;
 #endif