Commit 7b3595df authored by Vikas Chaudhary's avatar Vikas Chaudhary Committed by James Bottomley

[SCSI] qla4xxx: update AER support for ISP82XX

* Cleanup qla4xxx_pci_mmio_enabled():
  don't want to return PCI_ERS_NEED_RESET if firmware hung.
  IDC will take care of it.
* Request irq after initialize_adapter() in qla82xx_error_recovery().
* Return all active commands from qla4xxx_pci_error_detected().
* Cleanup ql4_def.h
Signed-off-by: default avatarVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: default avatarRavi Anand <ravi.anand@qlogic.com>
Reviewed-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent b25ee66f
......@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/aer.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
......@@ -36,24 +37,6 @@
#include "ql4_dbg.h"
#include "ql4_nx.h"
#if defined(CONFIG_PCIEAER)
#include <linux/aer.h>
#else
/* AER releated */
static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
{
return -EINVAL;
}
static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
{
return -EINVAL;
}
static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
{
return -EINVAL;
}
#endif
#ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
#define PCI_DEVICE_ID_QLOGIC_ISP4010 0x4010
#endif
......
......@@ -2252,6 +2252,8 @@ qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
qla4xxx_mailbox_premature_completion(ha);
qla4xxx_free_irqs(ha);
pci_disable_device(pdev);
/* Return back all IOs */
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
set_bit(AF_EEH_BUSY, &ha->flags);
......@@ -2275,17 +2277,13 @@ qla4xxx_pci_mmio_enabled(struct pci_dev *pdev)
if (!is_aer_supported(ha))
return PCI_ERS_RESULT_NONE;
if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: firmware hang -- "
"mmio_enabled\n", ha->host_no, __func__);
return PCI_ERS_RESULT_NEED_RESET;
} else
return PCI_ERS_RESULT_RECOVERED;
return PCI_ERS_RESULT_RECOVERED;
}
uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
{
uint32_t rval = QLA_ERROR;
uint32_t ret = 0;
int fn;
struct pci_dev *other_pdev = NULL;
......@@ -2297,7 +2295,6 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
clear_bit(AF_ONLINE, &ha->flags);
qla4xxx_mark_all_devices_missing(ha);
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
}
fn = PCI_FUNC(ha->pdev->devfn);
......@@ -2360,7 +2357,16 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
/* Clear driver state register */
qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
qla4_8xxx_set_drv_active(ha);
ha->isp_ops->enable_intrs(ha);
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to "
"reserve interrupt %d already in use.\n",
ha->pdev->irq);
rval = QLA_ERROR;
} else {
ha->isp_ops->enable_intrs(ha);
rval = QLA_SUCCESS;
}
}
qla4_8xxx_idc_unlock(ha);
} else {
......@@ -2372,8 +2378,18 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
clear_bit(AF_FW_RECOVERY, &ha->flags);
rval = qla4xxx_initialize_adapter(ha,
PRESERVE_DDB_LIST);
if (rval == QLA_SUCCESS)
ha->isp_ops->enable_intrs(ha);
if (rval == QLA_SUCCESS) {
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to"
" reserve interrupt %d already in"
" use.\n", ha->pdev->irq);
rval = QLA_ERROR;
} else {
ha->isp_ops->enable_intrs(ha);
rval = QLA_SUCCESS;
}
}
qla4_8xxx_idc_lock(ha);
qla4_8xxx_set_drv_active(ha);
qla4_8xxx_idc_unlock(ha);
......@@ -2415,12 +2431,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev)
goto exit_slot_reset;
}
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d"
" already in use.\n", pdev->irq);
goto exit_slot_reset;
}
ha->isp_ops->disable_intrs(ha);
if (is_qla8022(ha)) {
if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment