iio: adc: max11410: fix read_poll_timeout() usage

Even though we are passing 'ret' as stop condition for
read_poll_timeout(), that return code is still being ignored. The reason
is that the poll will stop if the passed condition is true which will
happen if the passed op() returns error. However, read_poll_timeout()
returns 0 if the *complete* condition evaluates to true. Therefore, the
error code returned by op() will be ignored.

To fix this we need to check for both error codes:
 * The one returned by read_poll_timeout() which is either 0 or
ETIMEDOUT.
 * The one returned by the passed op().

Fixes: a44ef7c4 ("iio: adc: add max11410 adc driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20230307095303.713251-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/adc/max11410.c

@@ -413,13 +413,17 @@ static int max11410_sample(struct max11410_state *st, int *sample_raw,
 		if (!ret)
 			return -ETIMEDOUT;
 	} else {
+		int ret2;
+
 		/* Wait for status register Conversion Ready flag */
-		ret = read_poll_timeout(max11410_read_reg, ret,
-					ret || (val & MAX11410_STATUS_CONV_READY_BIT),
+		ret = read_poll_timeout(max11410_read_reg, ret2,
+					ret2 || (val & MAX11410_STATUS_CONV_READY_BIT),
 					5000, MAX11410_CONVERSION_TIMEOUT_MS * 1000,
 					true, st, MAX11410_REG_STATUS, &val);
 		if (ret)
 			return ret;
+		if (ret2)
+			return ret2;
 	}
 
 	/* Read ADC Data */
@@ -850,17 +854,21 @@ static int max11410_init_vref(struct device *dev,
 
 static int max11410_calibrate(struct max11410_state *st, u32 cal_type)
 {
-	int ret, val;
+	int ret, ret2, val;
 
 	ret = max11410_write_reg(st, MAX11410_REG_CAL_START, cal_type);
 	if (ret)
 		return ret;
 
 	/* Wait for status register Calibration Ready flag */
-	return read_poll_timeout(max11410_read_reg, ret,
-				 ret || (val & MAX11410_STATUS_CAL_READY_BIT),
-				 50000, MAX11410_CALIB_TIMEOUT_MS * 1000, true,
-				 st, MAX11410_REG_STATUS, &val);
+	ret = read_poll_timeout(max11410_read_reg, ret2,
+				ret2 || (val & MAX11410_STATUS_CAL_READY_BIT),
+				50000, MAX11410_CALIB_TIMEOUT_MS * 1000, true,
+				st, MAX11410_REG_STATUS, &val);
+	if (ret)
+		return ret;
+
+	return ret2;
 }
 
 static int max11410_self_calibrate(struct max11410_state *st)