Commit 7bc74b3d authored by Daniel Drake's avatar Daniel Drake Committed by H. Peter Anvin

x86, olpc-xo1-sci: Add GPE handler and ebook switch functionality

The EC in the OLPC XO-1 delivers GPE events to provide various
notifications. Add the basic code for GPE/EC event processing and
enable the ebook switch, which can be used as a wakeup source.
Signed-off-by: default avatarDaniel Drake <dsd@laptop.org>
Link: http://lkml.kernel.org/r/1309019658-1712-8-git-send-email-dsd@laptop.orgAcked-by: default avatarAndres Salomon <dilinger@queued.net>
Signed-off-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
parent bc4ecd5a
......@@ -2087,7 +2087,9 @@ config OLPC_XO1_SCI
select MFD_CORE
---help---
Add support for SCI-based features of the OLPC XO-1 laptop:
- EC-driven system wakeups
- Power button
- Ebook switch
endif # X86_32
......
......@@ -111,6 +111,7 @@ extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
#define EC_WRITE_SCI_MASK 0x1b
#define EC_WAKE_UP_WLAN 0x24
#define EC_WLAN_LEAVE_RESET 0x25
#define EC_READ_EB_MODE 0x2a
#define EC_SET_SCI_INHIBIT 0x32
#define EC_SET_SCI_INHIBIT_RELEASE 0x34
#define EC_WLAN_ENTER_RESET 0x35
......@@ -144,7 +145,7 @@ extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
#define OLPC_GPIO_SMB_CLK 14
#define OLPC_GPIO_SMB_DATA 15
#define OLPC_GPIO_WORKAUX geode_gpio(24)
#define OLPC_GPIO_LID geode_gpio(26)
#define OLPC_GPIO_ECSCI geode_gpio(27)
#define OLPC_GPIO_LID 26
#define OLPC_GPIO_ECSCI 27
#endif /* _ASM_X86_OLPC_H */
......@@ -12,12 +12,15 @@
*/
#include <linux/cs5535.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/mfd/core.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
#include <asm/io.h>
#include <asm/msr.h>
......@@ -28,8 +31,60 @@
static unsigned long acpi_base;
static struct input_dev *power_button_idev;
static struct input_dev *ebook_switch_idev;
static int sci_irq;
/* Report current ebook switch state through input layer */
static void send_ebook_state(void)
{
unsigned char state;
if (olpc_ec_cmd(EC_READ_EB_MODE, NULL, 0, &state, 1)) {
pr_err(PFX "failed to get ebook state\n");
return;
}
input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state);
input_sync(ebook_switch_idev);
}
/*
* Process all items in the EC's SCI queue.
*
* This is handled in a workqueue because olpc_ec_cmd can be slow (and
* can even timeout).
*
* If propagate_events is false, the queue is drained without events being
* generated for the interrupts.
*/
static void process_sci_queue(bool propagate_events)
{
int r;
u16 data;
do {
r = olpc_ec_sci_query(&data);
if (r || !data)
break;
pr_debug(PFX "SCI 0x%x received\n", data);
if (data == EC_SCI_SRC_EBOOK && propagate_events)
send_ebook_state();
} while (data);
if (r)
pr_err(PFX "Failed to clear SCI queue");
}
static void process_sci_queue_work(struct work_struct *work)
{
process_sci_queue(true);
}
static DECLARE_WORK(sci_work, process_sci_queue_work);
static irqreturn_t xo1_sci_intr(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
......@@ -51,6 +106,11 @@ static irqreturn_t xo1_sci_intr(int irq, void *dev_id)
input_sync(power_button_idev);
}
if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */
cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
schedule_work(&sci_work);
}
return IRQ_HANDLED;
}
......@@ -60,6 +120,19 @@ static int xo1_sci_suspend(struct platform_device *pdev, pm_message_t state)
olpc_xo1_pm_wakeup_set(CS5536_PM_PWRBTN);
else
olpc_xo1_pm_wakeup_clear(CS5536_PM_PWRBTN);
if (device_may_wakeup(&ebook_switch_idev->dev))
olpc_ec_wakeup_set(EC_SCI_SRC_EBOOK);
else
olpc_ec_wakeup_clear(EC_SCI_SRC_EBOOK);
return 0;
}
static int xo1_sci_resume(struct platform_device *pdev)
{
/* Enable all EC events */
olpc_ec_mask_write(EC_SCI_SRC_ALL);
return 0;
}
......@@ -104,6 +177,50 @@ static int __devinit setup_sci_interrupt(struct platform_device *pdev)
return r;
}
static int __devinit setup_ec_sci(void)
{
int r;
r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI");
if (r)
return r;
gpio_direction_input(OLPC_GPIO_ECSCI);
/* Clear pending EC SCI events */
cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
/*
* Enable EC SCI events, and map them to both a PME and the SCI
* interrupt.
*
* Ordinarily, in addition to functioning as GPIOs, Geode GPIOs can
* be mapped to regular interrupts *or* Geode-specific Power
* Management Events (PMEs) - events that bring the system out of
* suspend. In this case, we want both of those things - the system
* wakeup, *and* the ability to get an interrupt when an event occurs.
*
* To achieve this, we map the GPIO to a PME, and then we use one
* of the many generic knobs on the CS5535 PIC to additionally map the
* PME to the regular SCI interrupt line.
*/
cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
/* Set the SCI to cause a PME event on group 7 */
cs5535_gpio_setup_event(OLPC_GPIO_ECSCI, 7, 1);
/* And have group 7 also fire the SCI interrupt */
cs5535_pic_unreqz_select_high(7, sci_irq);
return 0;
}
static void free_ec_sci(void)
{
gpio_free(OLPC_GPIO_ECSCI);
}
static int __devinit setup_power_button(struct platform_device *pdev)
{
int r;
......@@ -135,6 +252,37 @@ static void free_power_button(void)
input_free_device(power_button_idev);
}
static int __devinit setup_ebook_switch(struct platform_device *pdev)
{
int r;
ebook_switch_idev = input_allocate_device();
if (!ebook_switch_idev)
return -ENOMEM;
ebook_switch_idev->name = "EBook Switch";
ebook_switch_idev->phys = DRV_NAME "/input1";
set_bit(EV_SW, ebook_switch_idev->evbit);
set_bit(SW_TABLET_MODE, ebook_switch_idev->swbit);
ebook_switch_idev->dev.parent = &pdev->dev;
device_set_wakeup_capable(&ebook_switch_idev->dev, true);
r = input_register_device(ebook_switch_idev);
if (r) {
dev_err(&pdev->dev, "failed to register ebook switch: %d\n", r);
input_free_device(ebook_switch_idev);
}
return r;
}
static void free_ebook_switch(void)
{
input_unregister_device(ebook_switch_idev);
input_free_device(ebook_switch_idev);
}
static int __devinit xo1_sci_probe(struct platform_device *pdev)
{
struct resource *res;
......@@ -159,10 +307,39 @@ static int __devinit xo1_sci_probe(struct platform_device *pdev)
if (r)
return r;
r = setup_ebook_switch(pdev);
if (r)
goto err_ebook;
r = setup_ec_sci();
if (r)
goto err_ecsci;
/* Enable PME generation for EC-generated events */
outl(CS5536_GPIOM7_PME_EN, acpi_base + CS5536_PM_GPE0_EN);
/* Clear pending events */
outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS);
process_sci_queue(false);
/* Initial sync */
send_ebook_state();
r = setup_sci_interrupt(pdev);
if (r)
free_power_button();
goto err_sci;
/* Enable all EC events */
olpc_ec_mask_write(EC_SCI_SRC_ALL);
return r;
err_sci:
free_ec_sci();
err_ecsci:
free_ebook_switch();
err_ebook:
free_power_button();
return r;
}
......@@ -170,6 +347,9 @@ static int __devexit xo1_sci_remove(struct platform_device *pdev)
{
mfd_cell_disable(pdev);
free_irq(sci_irq, pdev);
cancel_work_sync(&sci_work);
free_ec_sci();
free_ebook_switch();
free_power_button();
acpi_base = 0;
return 0;
......@@ -182,6 +362,7 @@ static struct platform_driver xo1_sci_driver = {
.probe = xo1_sci_probe,
.remove = __devexit_p(xo1_sci_remove),
.suspend = xo1_sci_suspend,
.resume = xo1_sci_resume,
};
static int __init xo1_sci_init(void)
......
......@@ -11,6 +11,8 @@
#ifndef _CS5535_H
#define _CS5535_H
#include <asm/msr.h>
/* MSRs */
#define MSR_GLIU_P2D_RO0 0x10000029
......@@ -43,6 +45,18 @@
#define MSR_GX_GLD_MSR_CONFIG 0xC0002001
#define MSR_GX_MSR_PADSEL 0xC0002011
static inline int cs5535_pic_unreqz_select_high(unsigned int group,
unsigned int irq)
{
uint32_t lo, hi;
rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
lo &= ~(0xF << (group * 4));
lo |= (irq & 0xF) << (group * 4);
wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
return 0;
}
/* PIC registers */
#define CS5536_PIC_INT_SEL1 0x4d0
#define CS5536_PIC_INT_SEL2 0x4d1
......@@ -73,6 +87,7 @@
#define CS5536_PM1_EN 0x02
#define CS5536_PM1_CNT 0x08
#define CS5536_PM_GPE0_STS 0x18
#define CS5536_PM_GPE0_EN 0x1c
/* CS5536_PM1_STS bits */
#define CS5536_WAK_FLAG (1 << 15)
......@@ -81,6 +96,13 @@
/* CS5536_PM1_EN bits */
#define CS5536_PM_PWRBTN (1 << 8)
/* CS5536_PM_GPE0_STS bits */
#define CS5536_GPIOM7_PME_FLAG (1 << 31)
#define CS5536_GPIOM6_PME_FLAG (1 << 30)
/* CS5536_PM_GPE0_EN bits */
#define CS5536_GPIOM7_PME_EN (1 << 31)
/* VSA2 magic values */
#define VSA_VRC_INDEX 0xAC1C
#define VSA_VRC_DATA 0xAC1E
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment