regulator: tps65910: correct init value of n_voltages

Recent change in the core driver to get the maximum voltage
is based on the (n_voltages -1) steps of voltage.
For the tps65910, the (n_voltages -1)th step voltage is
calculated based on the callback function list_voltage.
This function direct maps the datasheet and adjust the
first few steps for initial voltage as per datasheet,
and hence initialize the n_voltages based on datasheet.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/tps65910-regulator.c

@@ -194,66 +194,66 @@ static struct tps_info tps65911_regs[] = {
 	{
 		.name = "vdd1",
 		.vin_name = "vcc1",
-		.n_voltages = 73,
+		.n_voltages = 0x4C,
 		.enable_time_us = 350,
 	},
 	{
 		.name = "vdd2",
 		.vin_name = "vcc2",
-		.n_voltages = 73,
+		.n_voltages = 0x4C,
 		.enable_time_us = 350,
 	},
 	{
 		.name = "vddctrl",
-		.n_voltages = 65,
+		.n_voltages = 0x44,
 		.enable_time_us = 900,
 	},
 	{
 		.name = "ldo1",
 		.vin_name = "vcc6",
-		.n_voltages = 47,
+		.n_voltages = 0x33,
 		.enable_time_us = 420,
 	},
 	{
 		.name = "ldo2",
 		.vin_name = "vcc6",
-		.n_voltages = 47,
+		.n_voltages = 0x33,
 		.enable_time_us = 420,
 	},
 	{
 		.name = "ldo3",
 		.vin_name = "vcc5",
-		.n_voltages = 24,
+		.n_voltages = 0x1A,
 		.enable_time_us = 230,
 	},
 	{
 		.name = "ldo4",
 		.vin_name = "vcc5",
-		.n_voltages = 47,
+		.n_voltages = 0x33,
 		.enable_time_us = 230,
 	},
 	{
 		.name = "ldo5",
 		.vin_name = "vcc4",
-		.n_voltages = 24,
+		.n_voltages = 0x1A,
 		.enable_time_us = 230,
 	},
 	{
 		.name = "ldo6",
 		.vin_name = "vcc3",
-		.n_voltages = 24,
+		.n_voltages = 0x1A,
 		.enable_time_us = 230,
 	},
 	{
 		.name = "ldo7",
 		.vin_name = "vcc3",
-		.n_voltages = 24,
+		.n_voltages = 0x1A,
 		.enable_time_us = 230,
 	},
 	{
 		.name = "ldo8",
 		.vin_name = "vcc3",
-		.n_voltages = 24,
+		.n_voltages = 0x1A,
 		.enable_time_us = 230,
 	},
 };