drm/rockchip: Clear all interrupts before requesting the IRQ

commit 5f9e93fe upstream.

Calling request_irq() followed by disable_irq() is usually a bad idea,
specially if the interrupt can be pending, and you're not yet in a
position to handle it.

This is exactly what happens on my kevin system when rebooting in a
second kernel using kexec: Some interrupt is left pending from
the previous kernel, and we take it too early, before disable_irq()
could do anything.

Let's clear the pending interrupts as we initialize the HW, and move
the interrupt request after that point. This ensures that we're in
a sane state when the interrupt is requested.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[adapted to recent rockchip-drm changes]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-2-marc.zyngier@arm.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -1386,6 +1386,9 @@ static int vop_initial(struct vop *vop)
 	usleep_range(10, 20);
 	reset_control_deassert(ahb_rst);
 
+	VOP_INTR_SET_TYPE(vop, clear, INTR_MASK, 1);
+	VOP_INTR_SET_TYPE(vop, enable, INTR_MASK, 0);
+
 	memcpy(vop->regsbak, vop->regs, vop->len);
 
 	for (i = 0; i < vop_data->table_size; i++)
@@ -1541,17 +1544,9 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
 
 	mutex_init(&vop->vsync_mutex);
 
-	ret = devm_request_irq(dev, vop->irq, vop_isr,
-			       IRQF_SHARED, dev_name(dev), vop);
-	if (ret)
-		return ret;
-
-	/* IRQ is initially disabled; it gets enabled in power_on */
-	disable_irq(vop->irq);
-
 	ret = vop_create_crtc(vop);
 	if (ret)
-		goto err_enable_irq;
+		return ret;
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -1561,13 +1556,19 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
 		goto err_disable_pm_runtime;
 	}
 
+	ret = devm_request_irq(dev, vop->irq, vop_isr,
+			       IRQF_SHARED, dev_name(dev), vop);
+	if (ret)
+		goto err_disable_pm_runtime;
+
+	/* IRQ is initially disabled; it gets enabled in power_on */
+	disable_irq(vop->irq);
+
 	return 0;
 
 err_disable_pm_runtime:
 	pm_runtime_disable(&pdev->dev);
 	vop_destroy_crtc(vop);
-err_enable_irq:
-	enable_irq(vop->irq); /* To balance out the disable_irq above */
 	return ret;
 }