drm/amd/display: Copy WM values from set A to other sets in hw_init

[Why]
When we transfer the WM range table to SMU, they can perform a watermark
switch right away. This can be a problem if we're in not in accelerated mode
during hw_init as SMU may initiate a dummy p-state change before the rest
of the watermarks are programmed. Watermark set A is defined to be
sufficient for all cases, so we can copy the values from set A to all other
sets, avoiding any issues from SMU doing WM switches.

[How]
 - new hubbub func init_watermarks
 - copy register values from set A to all other sets
 - call init_watermarks before calling notify_wm_ranges
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubbub.c

@@ -394,6 +394,48 @@ void hubbub3_force_pstate_change_control(struct hubbub *hubbub,
 			DCHUBBUB_ARB_ALLOW_PSTATE_CHANGE_FORCE_ENABLE, force);
 }
 
+/* Copy values from WM set A to all other sets */
+void hubbub3_init_watermarks(struct hubbub *hubbub)
+{
+	struct dcn20_hubbub *hubbub1 = TO_DCN20_HUBBUB(hubbub);
+	uint32_t reg;
+
+	reg = REG_READ(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_A);
+	REG_WRITE(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_D, reg);
+
+	reg = REG_READ(DCHUBBUB_ARB_FRAC_URG_BW_FLIP_A);
+	REG_WRITE(DCHUBBUB_ARB_FRAC_URG_BW_FLIP_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_FRAC_URG_BW_FLIP_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_FRAC_URG_BW_FLIP_D, reg);
+
+	reg = REG_READ(DCHUBBUB_ARB_FRAC_URG_BW_NOM_A);
+	REG_WRITE(DCHUBBUB_ARB_FRAC_URG_BW_NOM_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_FRAC_URG_BW_NOM_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_FRAC_URG_BW_NOM_D, reg);
+
+	reg = REG_READ(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_A);
+	REG_WRITE(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_D, reg);
+
+	reg = REG_READ(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_A);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_D, reg);
+
+	reg = REG_READ(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_A);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_D, reg);
+
+	reg = REG_READ(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_A);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_B, reg);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_C, reg);
+	REG_WRITE(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_D, reg);
+}
+
 static const struct hubbub_funcs hubbub30_funcs = {
 	.update_dchub = hubbub2_update_dchub,
 	.init_dchub_sys_ctx = hubbub3_init_dchub_sys_ctx,
@@ -408,6 +450,7 @@ static const struct hubbub_funcs hubbub30_funcs = {
 	.is_allow_self_refresh_enabled = hubbub1_is_allow_self_refresh_enabled,
 	.force_wm_propagate_to_pipes = hubbub3_force_wm_propagate_to_pipes,
 	.force_pstate_change_control = hubbub3_force_pstate_change_control,
+	.init_watermarks = hubbub3_init_watermarks,
 };
 
 void hubbub3_construct(struct dcn20_hubbub *hubbub3,

drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubbub.h

@@ -119,4 +119,6 @@ bool hubbub3_program_watermarks(
 void hubbub3_force_pstate_change_control(struct hubbub *hubbub,
 		bool force, bool allow);
 
+void hubbub3_init_watermarks(struct hubbub *hubbub);
+
 #endif

drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h

@@ -155,6 +155,8 @@ struct hubbub_funcs {
 #if defined(CONFIG_DRM_AMD_DC_DCN3_0)
 
 	void (*force_pstate_change_control)(struct hubbub *hubbub, bool force, bool allow);
+
+	void (*init_watermarks)(struct hubbub *hubbub);
 #endif
 };