Commit 7c6eac23 authored by Chunfeng Yun's avatar Chunfeng Yun Committed by Kishon Vijay Abraham I

dt-bindings: phy-mt65xx-usb: supports PCIe, SATA and rename file

add support for PCIe and SATA, also add some new compatibles.

due to phy-mt65xx-usb.txt holds the bindings for all mediatek SoCs
with T-PHY controller, change the name to phy-mtk-tphy.txt to
reflect that.
Signed-off-by: default avatarChunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 4ab26cb6
mt65xx USB3.0 PHY binding MediaTek T-PHY binding
-------------------------- --------------------------
This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. T-phy controller supports physical layer functionality for a number of
controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
Required properties (controller (parent) node): Required properties (controller (parent) node):
- compatible : should be one of - compatible : should be one of
"mediatek,mt2701-u3phy" "mediatek,generic-tphy-v1"
"mediatek,mt2712-u3phy" "mediatek,generic-tphy-v2"
"mediatek,mt8173-u3phy" "mediatek,mt2701-u3phy" (deprecated)
"mediatek,mt2712-u3phy" (deprecated)
"mediatek,mt8173-u3phy";
make use of "mediatek,generic-tphy-v1" on mt2701 instead and
"mediatek,generic-tphy-v2" on mt2712 instead.
- clocks : (deprecated, use port's clocks instead) a list of phandle + - clocks : (deprecated, use port's clocks instead) a list of phandle +
clock-specifier pairs, one for each entry in clock-names clock-specifier pairs, one for each entry in clock-names
- clock-names : (deprecated, use port's one instead) must contain - clock-names : (deprecated, use port's one instead) must contain
...@@ -35,6 +40,8 @@ Required properties (port (child) node): ...@@ -35,6 +40,8 @@ Required properties (port (child) node):
cell after port phandle is phy type from: cell after port phandle is phy type from:
- PHY_TYPE_USB2 - PHY_TYPE_USB2
- PHY_TYPE_USB3 - PHY_TYPE_USB3
- PHY_TYPE_PCIE
- PHY_TYPE_SATA
Example: Example:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment