Commit 7c95a3f5 authored by William Breathitt Gray's avatar William Breathitt Gray Committed by Jonathan Cameron

iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll

ADC sample captures take a certain amount of time to complete after
initiated; this conversion time range can be anywhere from 5
microseconds to 53.68 seconds depending on the configuration of the
Analog Input Frame Timer register. When the conversion is in progress,
the ADC Status register CNV bit is high. Call regmap_read_poll_timeout()
to poll until the ADC conversion is completed (or timeout if more than
53.68 seconds passes).
Suggested-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarWilliam Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/9ef433f107afd1d4dcd2d97ef0e932d7045c2bbd.1680790580.git.william.gray@linaro.orgSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent c7301b84
...@@ -205,21 +205,25 @@ static int stx104_read_raw(struct iio_dev *indio_dev, ...@@ -205,21 +205,25 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
return err; return err;
} }
/* trigger ADC sample capture by writing to the 8-bit /*
* Software Strobe Register and wait for completion * Trigger ADC sample capture by writing to the 8-bit Software Strobe Register and
* wait for completion; the conversion time range is 5 microseconds to 53.68 seconds
* in steps of 25 nanoseconds. The actual Analog Input Frame Timer time interval is
* calculated as:
* ai_time_frame_ns = ( AIFT + 1 ) * ( 25 nanoseconds ).
* Where 0 <= AIFT <= 2147483648.
*/ */
err = regmap_write(priv->aio_ctl_map, STX104_SOFTWARE_STROBE, 0); err = regmap_write(priv->aio_ctl_map, STX104_SOFTWARE_STROBE, 0);
if (err) { if (err) {
mutex_unlock(&priv->lock); mutex_unlock(&priv->lock);
return err; return err;
} }
do { err = regmap_read_poll_timeout(priv->aio_ctl_map, STX104_ADC_STATUS, adc_status,
err = regmap_read(priv->aio_ctl_map, STX104_ADC_STATUS, &adc_status); !u8_get_bits(adc_status, STX104_CNV), 0, 53687092);
if (err) { if (err) {
mutex_unlock(&priv->lock); mutex_unlock(&priv->lock);
return err; return err;
} }
} while (u8_get_bits(adc_status, STX104_CNV));
err = regmap_read(priv->aio_data_map, STX104_ADC_DATA, &value); err = regmap_read(priv->aio_data_map, STX104_ADC_DATA, &value);
if (err) { if (err) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment