arm64: dts: qcom: sdm630: Add ADSP remoteproc configuration

Configure the ADSP remote processor and add a simple sound{}
node to make way for future development.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-18-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sdm630.dtsi

@@ -10,6 +10,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,apr.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -1709,6 +1710,85 @@ mmss_smmu: iommu@cd00000 {
 			status = "disabled";
 		};
 
+		adsp_pil: remoteproc@15700000 {
+			compatible = "qcom,sdm660-adsp-pas";
+			reg = <0x15700000 0x4040>;
+
+			interrupts-extended =
+				<&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs_glb 9>;
+				qcom,remote-pid = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6core {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: apr-service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: apr-service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_smmu 1>;
+						};
+					};
+
+					q6adm: apr-service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
 		gnoc: interconnect@17900000 {
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
@@ -1808,6 +1888,9 @@ tcsr_mutex: hwlock {
 		#hwlock-cells = <1>;
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		aoss-thermal {
 			polling-delay-passive = <250>;