ARM: dts: qcom: ipq4019: use generic node names for USB

Device node names should be generic which is also expected by USB
bindings:

  qcom-ipq4018-jalapeno.dtb: dwc3@6000000: $nodename:0: 'dwc3@6000000' does not match '^usb(@.*)?'

Override also the DWC3 node in qcom-ipq4018-ap120c-ac.dtsi by
label/phandle, not via node path, because it is less error-prone and
makes the overriding node-name independent.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619170151.65505-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi

@@ -262,10 +262,11 @@ &usb3_hs_phy {
 &usb3 {
 	status = "okay";
 
-	dwc3@8a00000 {
-		phys = <&usb3_hs_phy>;
-		phy-names = "usb2-phy";
 	};
+
+&usb3_dwc {
+	phys = <&usb3_hs_phy>;
+	phy-names = "usb2-phy";
 };
 
 &usb2_hs_phy {

arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi

@@ -621,7 +621,7 @@ ethphy4: ethernet-phy@4 {
 			};
 		};
 
-		usb3_ss_phy: ssphy@9a000 {
+		usb3_ss_phy: usb-phy@9a000 {
 			compatible = "qcom,usb-ss-ipq4019-phy";
 			#phy-cells = <0>;
 			reg = <0x9a000 0x800>;
@@ -631,7 +631,7 @@ usb3_ss_phy: ssphy@9a000 {
 			status = "disabled";
 		};
 
-		usb3_hs_phy: hsphy@a6000 {
+		usb3_hs_phy: usb-phy@a6000 {
 			compatible = "qcom,usb-hs-ipq4019-phy";
 			#phy-cells = <0>;
 			reg = <0xa6000 0x40>;
@@ -641,7 +641,7 @@ usb3_hs_phy: hsphy@a6000 {
 			status = "disabled";
 		};
 
-		usb3: usb3@8af8800 {
+		usb3: usb@8af8800 {
 			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x8af8800 0x100>;
 			#address-cells = <1>;
@@ -653,7 +653,7 @@ usb3: usb3@8af8800 {
 			ranges;
 			status = "disabled";
 
-			dwc3@8a00000 {
+			usb3_dwc: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xf8000>;
 				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
@@ -663,7 +663,7 @@ dwc3@8a00000 {
 			};
 		};
 
-		usb2_hs_phy: hsphy@a8000 {
+		usb2_hs_phy: usb-phy@a8000 {
 			compatible = "qcom,usb-hs-ipq4019-phy";
 			#phy-cells = <0>;
 			reg = <0xa8000 0x40>;
@@ -673,7 +673,7 @@ usb2_hs_phy: hsphy@a8000 {
 			status = "disabled";
 		};
 
-		usb2: usb2@60f8800 {
+		usb2: usb@60f8800 {
 			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x60f8800 0x100>;
 			#address-cells = <1>;
@@ -685,7 +685,7 @@ usb2: usb2@60f8800 {
 			ranges;
 			status = "disabled";
 
-			dwc3@6000000 {
+			usb@6000000 {
 				compatible = "snps,dwc3";
 				reg = <0x6000000 0xf8000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;