ARM: dts: gemini: convert obsolete SPI properties

gpio-xxx are obsoletes properties, convert them to xxx-gpios.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/gemini-dlink-dir-685.dts

@@ -61,9 +61,9 @@ spi {
 		#size-cells = <0>;
 
 		/* Collides with IDE pins, that's cool (we do not use them) */
-		gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 

arch/arm/boot/dts/gemini-sl93512r.dts

@@ -87,9 +87,9 @@ spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 

arch/arm/boot/dts/gemini-sq201.dts

@@ -72,9 +72,9 @@ spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;