Commit 7d84f66f authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Bryan Wu

leds: Convert S3C24XX LED driver to gpiolib API

The s3c2410_gpio* calls are obsolete and have been scheduled for
removal since several kernel releases. Remove them and use common
gpiolib API instead.
This patch also adds gpio_request/gpio_free call for API corectness.

It is a prerequisite for removal of the S3C24XX SoC specific
arch/arm/plat-samsung/include/gpio-fns.h header.

Tested on Micro2440-SDK.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
parent 7e97b581
......@@ -45,17 +45,19 @@ static void s3c24xx_led_set(struct led_classdev *led_cdev,
{
struct s3c24xx_gpio_led *led = to_gpio(led_cdev);
struct s3c24xx_led_platdata *pd = led->pdata;
int state = (value ? 1 : 0) ^ (pd->flags & S3C24XX_LEDF_ACTLOW);
/* there will be a short delay between setting the output and
* going from output to input when using tristate. */
s3c2410_gpio_setpin(pd->gpio, (value ? 1 : 0) ^
(pd->flags & S3C24XX_LEDF_ACTLOW));
if (pd->flags & S3C24XX_LEDF_TRISTATE)
s3c2410_gpio_cfgpin(pd->gpio,
value ? S3C2410_GPIO_OUTPUT : S3C2410_GPIO_INPUT);
gpio_set_value(pd->gpio, state);
if (pd->flags & S3C24XX_LEDF_TRISTATE) {
if (value)
gpio_direction_output(pd->gpio, state);
else
gpio_direction_input(pd->gpio);
}
}
static int s3c24xx_led_remove(struct platform_device *dev)
......@@ -63,6 +65,7 @@ static int s3c24xx_led_remove(struct platform_device *dev)
struct s3c24xx_gpio_led *led = pdev_to_gpio(dev);
led_classdev_unregister(&led->cdev);
gpio_free(led->pdata->gpio);
return 0;
}
......@@ -89,16 +92,19 @@ static int s3c24xx_led_probe(struct platform_device *dev)
led->pdata = pdata;
ret = gpio_request(pdata->gpio, "S3C24XX_LED");
if (ret < 0)
return ret;
/* no point in having a pull-up if we are always driving */
if (pdata->flags & S3C24XX_LEDF_TRISTATE) {
s3c2410_gpio_setpin(pdata->gpio, 0);
s3c2410_gpio_cfgpin(pdata->gpio, S3C2410_GPIO_INPUT);
} else {
s3c2410_gpio_pullup(pdata->gpio, 0);
s3c2410_gpio_setpin(pdata->gpio, 0);
s3c2410_gpio_cfgpin(pdata->gpio, S3C2410_GPIO_OUTPUT);
}
s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE);
if (pdata->flags & S3C24XX_LEDF_TRISTATE)
gpio_direction_input(pdata->gpio);
else
gpio_direction_output(pdata->gpio,
pdata->flags & S3C24XX_LEDF_ACTLOW ? 1 : 0);
/* register our new led device */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment