Merge remote-tracking branch 'asoc/topic/fsl-esai' into asoc-next

Documentation/devicetree/bindings/regmap/regmap.txt

+Device-Tree binding for regmap
+
+The endianness mode of CPU & Device scenarios:
+Index     Device     Endianness properties
+---------------------------------------------------
+1         BE         'big-endian'
+2         LE         'little-endian'
+
+For one device driver, which will run in different scenarios above
+on different SoCs using the devicetree, we need one way to simplify
+this.
+
+Required properties:
+- {big,little}-endian: these are boolean properties, if absent
+  meaning that the CPU and the Device are in the same endianness mode,
+  these properties are for register values and all the buffers only.
+
+Examples:
+Scenario 1 : CPU in LE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 2 : CPU in LE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      big-endian;
+};
+
+Scenario 3 : CPU in BE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 4 : CPU in BE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      little-endian;
+};

Documentation/devicetree/bindings/sound/es8328.txt

+Everest ES8328 audio CODEC
+
+This device supports both I2C and SPI.
+
+Required properties:
+
+  - compatible : "everest,es8328"
+  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
+  - AVDD-supply : Regulator providing analog supply voltage 3.3V
+  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
+  - IPVDD-supply : Regulator providing analog output voltage 3.3V
+  - clocks : A 22.5792 or 11.2896 MHz clock
+  - reg : the I2C address of the device for I2C, the chip select number for SPI
+
+Pins on the device (for linking into audio routes):
+
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+
+Example:
+
+codec: es8328@11 {
+	compatible = "everest,es8328";
+	DVDD-supply = <&reg_3p3v>;
+	AVDD-supply = <&reg_3p3v>;
+	PVDD-supply = <&reg_3p3v>;
+	HPVDD-supply = <&reg_3p3v>;
+	clocks = <&clks 169>;
+	reg = <0x11>;
+};

Documentation/devicetree/bindings/sound/fsl,esai.txt

@@ -7,7 +7,8 @@ other DSPs. It has up to six transmitters and four receivers.
 
 Required properties:
 
-  - compatible : Compatible list, must contain "fsl,imx35-esai".
+  - compatible : Compatible list, must contain "fsl,imx35-esai" or
+		 "fsl,vf610-esai"
 
   - reg : Offset and length of the register set for the device.
 

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

+Freescale Generic ASoC Sound Card with ASRC support
+
+The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale
+SoCs connecting with external CODECs.
+
+The idea of this generic sound card is a bit like ASoC Simple Card. However,
+for Freescale SoCs (especially those released in recent years), most of them
+have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And
+this is a specific feature that might be painstakingly controlled and merged
+into the Simple Card.
+
+So having this generic sound card allows all Freescale SoC users to benefit
+from the simplification of a new card support and the capability of the wide
+sample rates support through ASRC.
+
+Note: The card is initially designed for those sound cards who use I2S and
+      PCM DAI formats. However, it'll be also possible to support those non
+      I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long
+      as the driver has been properly upgraded.
+
+
+The compatible list for this generic sound card currently:
+ "fsl,imx-audio-cs42888"
+
+ "fsl,imx-audio-wm8962"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt)
+
+ "fsl,imx-audio-sgtl5000"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
+
+Required properties:
+
+  - compatible		: Contains one of entries in the compatible list.
+
+  - model		: The user-visible name of this sound complex
+
+  - audio-cpu		: The phandle of an CPU DAI controller
+
+  - audio-codec		: The phandle of an audio codec
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. There're a few pre-designed board connectors:
+			   * Line Out Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Mic Jack
+			   * Ext Spk
+			   * AMIC (stands for Analog Microphone Jack)
+			   * DMIC (stands for Digital Microphone Jack)
+
+			  Note: The "Mic Jack" and "AMIC" are redundant while
+			        coexsiting in order to support the old bindings
+				of wm8962 and sgtl5000.
+
+Optional properties:
+
+  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
+			  need to add ASRC support via DPCM.
+
+Example:
+sound-cs42888 {
+	compatible = "fsl,imx-audio-cs42888";
+	model = "cs42888-audio";
+	audio-cpu = <&esai>;
+	audio-asrc = <&asrc>;
+	audio-codec = <&cs42888>;
+	audio-routing =
+		"Line Out Jack", "AOUT1L",
+		"Line Out Jack", "AOUT1R",
+		"Line Out Jack", "AOUT2L",
+		"Line Out Jack", "AOUT2R",
+		"Line Out Jack", "AOUT3L",
+		"Line Out Jack", "AOUT3R",
+		"Line Out Jack", "AOUT4L",
+		"Line Out Jack", "AOUT4R",
+		"AIN1L", "Line In Jack",
+		"AIN1R", "Line In Jack",
+		"AIN2L", "Line In Jack",
+		"AIN2R", "Line In Jack";
+};

Documentation/devicetree/bindings/sound/fsl-sai.txt

@@ -18,9 +18,8 @@ Required properties:
 - pinctrl-names: Must contain a "default" entry.
 - pinctrl-NNN: One property must exist for each entry in pinctrl-names.
   See ../pinctrl/pinctrl-bindings.txt for details of the property values.
-- big-endian-regs: If this property is absent, the little endian mode will
-  be in use as default, or the big endian mode will be in use for all the
-  device registers.
+- big-endian: Boolean property, required if all the FTM_PWM registers
+  are big-endian rather than little-endian.
 - big-endian-data: If this property is absent, the little endian mode will
   be in use as default, or the big endian mode will be in use for all the
   fifo data.
@@ -38,6 +37,6 @@ sai2: sai@40031000 {
 	      dma-names = "tx", "rx";
 	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
 		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
-	      big-endian-regs;
+	      big-endian;
 	      big-endian-data;
 };

Documentation/devicetree/bindings/sound/imx-audio-es8328.txt

+Freescale i.MX audio complex with ES8328 codec
+
+Required properties:
+- compatible       : "fsl,imx-audio-es8328"
+- model            : The user-visible name of this sound complex
+- ssi-controller   : The phandle of the i.MX SSI controller
+- jack-gpio        : Optional GPIO for headphone jack
+- audio-amp-supply : Power regulator for speaker amps
+- audio-codec      : The phandle of the ES8328 audio codec
+- audio-routing    : A list of the connections between audio components.
+                     Each entry is a pair of strings, the first being the
+		     connection's sink, the second being the connection's
+		     source. Valid names could be power supplies, ES8328
+		     pins, and the jacks on the board:
+
+			Power supplies:
+			   * audio-amp
+
+			ES8328 pins:
+			   * LOUT1
+			   * LOUT2
+			   * ROUT1
+			   * ROUT2
+			   * LINPUT1
+			   * LINPUT2
+			   * RINPUT1
+			   * RINPUT2
+			   * Mic PGA
+
+			Board connectors:
+			   * Headphone
+			   * Speaker
+			   * Mic Jack
+- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx-audio-es8328";
+	model = "imx-audio-es8328";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&codec>;
+	jack-gpio = <&gpio5 15 0>;
+	audio-amp-supply = <&reg_audio_amp>;
+	audio-routing =
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+		"Speaker", "audio-amp",
+		"Headphone", "ROUT1",
+		"Headphone", "LOUT1",
+		"LINPUT1", "Mic Jack",
+		"RINPUT1", "Mic Jack",
+		"Mic Jack", "Mic Bias";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -48,6 +48,7 @@ epfl	Ecole Polytechnique Fédérale de Lausanne
 epson	Seiko Epson Corp.
 est	ESTeem Wireless Modems
 eukrea  Eukréa Electromatique
+everest	Everest Semiconductor Co. Ltd.
 excito	Excito
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.

drivers/base/regmap/regmap-i2c.c

@@ -168,6 +168,8 @@ static struct regmap_bus regmap_i2c = {
 	.write = regmap_i2c_write,
 	.gather_write = regmap_i2c_gather_write,
 	.read = regmap_i2c_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
 };
 
 static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,

drivers/base/regmap/regmap-spi.c

@@ -109,6 +109,8 @@ static struct regmap_bus regmap_spi = {
 	.async_alloc = regmap_spi_async_alloc,
 	.read = regmap_spi_read,
 	.read_flag_mask = 0x80,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
 };
 
 /**

drivers/base/regmap/regmap.c

@@ -15,6 +15,7 @@
 #include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/err.h>
+#include <linux/of.h>
 #include <linux/rbtree.h>
 #include <linux/sched.h>
 
@@ -448,6 +449,66 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
 }
 EXPORT_SYMBOL_GPL(regmap_attach_dev);
 
+static enum regmap_endian regmap_get_reg_endian(const struct regmap_bus *bus,
+					const struct regmap_config *config)
+{
+	enum regmap_endian endian;
+
+	/* Retrieve the endianness specification from the regmap config */
+	endian = config->reg_format_endian;
+
+	/* If the regmap config specified a non-default value, use that */
+	if (endian != REGMAP_ENDIAN_DEFAULT)
+		return endian;
+
+	/* Retrieve the endianness specification from the bus config */
+	if (bus && bus->reg_format_endian_default)
+		endian = bus->reg_format_endian_default;
+
+	/* If the bus specified a non-default value, use that */
+	if (endian != REGMAP_ENDIAN_DEFAULT)
+		return endian;
+
+	/* Use this if no other value was found */
+	return REGMAP_ENDIAN_BIG;
+}
+
+static enum regmap_endian regmap_get_val_endian(struct device *dev,
+					const struct regmap_bus *bus,
+					const struct regmap_config *config)
+{
+	struct device_node *np = dev->of_node;
+	enum regmap_endian endian;
+
+	/* Retrieve the endianness specification from the regmap config */
+	endian = config->val_format_endian;
+
+	/* If the regmap config specified a non-default value, use that */
+	if (endian != REGMAP_ENDIAN_DEFAULT)
+		return endian;
+
+	/* Parse the device's DT node for an endianness specification */
+	if (of_property_read_bool(np, "big-endian"))
+		endian = REGMAP_ENDIAN_BIG;
+	else if (of_property_read_bool(np, "little-endian"))
+		endian = REGMAP_ENDIAN_LITTLE;
+
+	/* If the endianness was specified in DT, use that */
+	if (endian != REGMAP_ENDIAN_DEFAULT)
+		return endian;
+
+	/* Retrieve the endianness specification from the bus config */
+	if (bus && bus->val_format_endian_default)
+		endian = bus->val_format_endian_default;
+
+	/* If the bus specified a non-default value, use that */
+	if (endian != REGMAP_ENDIAN_DEFAULT)
+		return endian;
+
+	/* Use this if no other value was found */
+	return REGMAP_ENDIAN_BIG;
+}
+
 /**
  * regmap_init(): Initialise register map
  *
@@ -551,17 +612,8 @@ struct regmap *regmap_init(struct device *dev,
 		map->reg_read  = _regmap_bus_read;
 	}
 
-	reg_endian = config->reg_format_endian;
-	if (reg_endian == REGMAP_ENDIAN_DEFAULT)
-		reg_endian = bus->reg_format_endian_default;
-	if (reg_endian == REGMAP_ENDIAN_DEFAULT)
-		reg_endian = REGMAP_ENDIAN_BIG;
-
-	val_endian = config->val_format_endian;
-	if (val_endian == REGMAP_ENDIAN_DEFAULT)
-		val_endian = bus->val_format_endian_default;
-	if (val_endian == REGMAP_ENDIAN_DEFAULT)
-		val_endian = REGMAP_ENDIAN_BIG;
+	reg_endian = regmap_get_reg_endian(bus, config);
+	val_endian = regmap_get_val_endian(dev, bus, config);
 
 	switch (config->reg_bits + map->reg_shift) {
 	case 2:

sound/soc/codecs/Kconfig

@@ -57,6 +57,8 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_DA732X if I2C
 	select SND_SOC_DA9055 if I2C
 	select SND_SOC_BT_SCO
+	select SND_SOC_ES8328_SPI if SPI_MASTER
+	select SND_SOC_ES8328_I2C if I2C
 	select SND_SOC_ISABELLE if I2C
 	select SND_SOC_JZ4740_CODEC
 	select SND_SOC_LM4857 if I2C
@@ -405,6 +407,17 @@ config SND_SOC_DMIC
 config SND_SOC_HDMI_CODEC
        tristate "HDMI stub CODEC"
 
+config SND_SOC_ES8328
+	tristate "Everest Semi ES8328 CODEC"
+
+config SND_SOC_ES8328_I2C
+	tristate
+	select SND_SOC_ES8328
+
+config SND_SOC_ES8328_SPI
+	tristate
+	select SND_SOC_ES8328
+
 config SND_SOC_ISABELLE
         tristate
 

sound/soc/codecs/Makefile

@@ -49,6 +49,9 @@ snd-soc-da732x-objs := da732x.o
 snd-soc-da9055-objs := da9055.o
 snd-soc-bt-sco-objs := bt-sco.o
 snd-soc-dmic-objs := dmic.o
+snd-soc-es8328-objs := es8328.o
+snd-soc-es8328-i2c-objs := es8328-i2c.o
+snd-soc-es8328-spi-objs := es8328-spi.o
 snd-soc-isabelle-objs := isabelle.o
 snd-soc-jz4740-codec-objs := jz4740.o
 snd-soc-l3-objs := l3.o
@@ -220,6 +223,9 @@ obj-$(CONFIG_SND_SOC_DA732X)	+= snd-soc-da732x.o
 obj-$(CONFIG_SND_SOC_DA9055)	+= snd-soc-da9055.o
 obj-$(CONFIG_SND_SOC_BT_SCO)	+= snd-soc-bt-sco.o
 obj-$(CONFIG_SND_SOC_DMIC)	+= snd-soc-dmic.o
+obj-$(CONFIG_SND_SOC_ES8328)	+= snd-soc-es8328.o
+obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o
+obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
 obj-$(CONFIG_SND_SOC_ISABELLE)	+= snd-soc-isabelle.o
 obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o

sound/soc/codecs/es8328-i2c.c

+/*
+ * es8328-i2c.c  --  ES8328 ALSA SoC I2C Audio driver
+ *
+ * Copyright 2014 Sutajio Ko-Usagi PTE LTD
+ *
+ * Author: Sean Cross <xobs@kosagi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <sound/soc.h>
+
+#include "es8328.h"
+
+static const struct i2c_device_id es8328_id[] = {
+	{ "everest,es8328", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, es8328_id);
+
+static const struct of_device_id es8328_of_match[] = {
+	{ .compatible = "everest,es8328", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, es8328_of_match);
+
+static int es8328_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	return es8328_probe(&i2c->dev,
+			devm_regmap_init_i2c(i2c, &es8328_regmap_config));
+}
+
+static int es8328_i2c_remove(struct i2c_client *i2c)
+{
+	snd_soc_unregister_codec(&i2c->dev);
+	return 0;
+}
+
+static struct i2c_driver es8328_i2c_driver = {
+	.driver = {
+		.name		= "es8328",
+		.of_match_table = es8328_of_match,
+	},
+	.probe    = es8328_i2c_probe,
+	.remove   = es8328_i2c_remove,
+	.id_table = es8328_id,
+};
+
+module_i2c_driver(es8328_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC ES8328 audio CODEC I2C driver");
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_LICENSE("GPL");

sound/soc/codecs/es8328-spi.c

+/*
+ * es8328.c  --  ES8328 ALSA SoC SPI Audio driver
+ *
+ * Copyright 2014 Sutajio Ko-Usagi PTE LTD
+ *
+ * Author: Sean Cross <xobs@kosagi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <sound/soc.h>
+#include "es8328.h"
+
+static const struct of_device_id es8328_of_match[] = {
+	{ .compatible = "everest,es8328", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, es8328_of_match);
+
+static int es8328_spi_probe(struct spi_device *spi)
+{
+	return es8328_probe(&spi->dev,
+			devm_regmap_init_spi(spi, &es8328_regmap_config));
+}
+
+static int es8328_spi_remove(struct spi_device *spi)
+{
+	snd_soc_unregister_codec(&spi->dev);
+	return 0;
+}
+
+static struct spi_driver es8328_spi_driver = {
+	.driver = {
+		.name		= "es8328",
+		.of_match_table	= es8328_of_match,
+	},
+	.probe	= es8328_spi_probe,
+	.remove	= es8328_spi_remove,
+};
+
+module_spi_driver(es8328_spi_driver);
+MODULE_DESCRIPTION("ASoC ES8328 audio CODEC SPI driver");
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_LICENSE("GPL");

sound/soc/fsl/Kconfig

@@ -240,6 +240,18 @@ config SND_SOC_IMX_WM8962
 	  Say Y if you want to add support for SoC audio on an i.MX board with
 	  a wm8962 codec.
 
+config SND_SOC_IMX_ES8328
+	tristate "SoC Audio support for i.MX boards with the ES8328 codec"
+	depends on OF && (I2C || SPI)
+	select SND_SOC_ES8328_I2C if I2C
+	select SND_SOC_ES8328_SPI if SPI_MASTER
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_FSL_SSI
+	help
+	  Say Y if you want to add support for the ES8328 audio codec connected
+	  via SSI/I2S over either SPI or I2C.
+
 config SND_SOC_IMX_SGTL5000
 	tristate "SoC Audio support for i.MX boards with sgtl5000"
 	depends on OF && I2C
@@ -268,6 +280,23 @@ config SND_SOC_IMX_MC13783
 	select SND_SOC_MC13783
 	select SND_SOC_IMX_PCM_DMA
 
+config SND_SOC_FSL_ASOC_CARD
+	tristate "Generic ASoC Sound Card with ASRC support"
+	depends on OF && I2C
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_FSL_ESAI
+	select SND_SOC_FSL_SAI
+	select SND_SOC_FSL_SSI
+	select SND_SOC_CS42XX8_I2C
+	select SND_SOC_SGTL5000
+	select SND_SOC_WM8962
+	help
+	 ALSA SoC Audio support with ASRC feature for Freescale SoCs that have
+	 ESAI/SAI/SSI and connect with external CODECs such as WM8962, CS42888
+	 and SGTL5000.
+	 Say Y if you want to add support for Freescale Generic ASoC Sound Card.
+
 endif # SND_IMX_SOC
 
 endmenu

sound/soc/fsl/Makefile

@@ -11,6 +11,7 @@ snd-soc-p1022-rdk-objs := p1022_rdk.o
 obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o
 
 # Freescale SSI/DMA/SAI/SPDIF Support
+snd-soc-fsl-asoc-card-objs := fsl-asoc-card.o
 snd-soc-fsl-asrc-objs := fsl_asrc.o fsl_asrc_dma.o
 snd-soc-fsl-sai-objs := fsl_sai.o
 snd-soc-fsl-ssi-y := fsl_ssi.o
@@ -19,6 +20,7 @@ snd-soc-fsl-spdif-objs := fsl_spdif.o
 snd-soc-fsl-esai-objs := fsl_esai.o
 snd-soc-fsl-utils-objs := fsl_utils.o
 snd-soc-fsl-dma-objs := fsl_dma.o
+obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o
 obj-$(CONFIG_SND_SOC_FSL_ASRC) += snd-soc-fsl-asrc.o
 obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o
 obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o
@@ -50,6 +52,7 @@ snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
 snd-soc-phycore-ac97-objs := phycore-ac97.o
 snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
 snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+snd-soc-imx-es8328-objs := imx-es8328.o
 snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
 snd-soc-imx-wm8962-objs := imx-wm8962.o
 snd-soc-imx-spdif-objs := imx-spdif.o
@@ -59,6 +62,7 @@ obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
 obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
 obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
 obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
+obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
 obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
 obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
 obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o

sound/soc/fsl/fsl_asrc.c

@@ -684,7 +684,7 @@ static bool fsl_asrc_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config fsl_asrc_regmap_config = {
+static const struct regmap_config fsl_asrc_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
@@ -802,10 +802,6 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 
 	asrc_priv->paddr = res->start;
 
-	/* Register regmap and let it prepare core clock */
-	if (of_property_read_bool(np, "big-endian"))
-		fsl_asrc_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
 	asrc_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs,
 						      &fsl_asrc_regmap_config);
 	if (IS_ERR(asrc_priv->regmap)) {

sound/soc/fsl/fsl_esai.c

@@ -37,6 +37,7 @@
  * @fsysclk: system clock source to derive HCK, SCK and FS
  * @fifo_depth: depth of tx/rx FIFO
  * @slot_width: width of each DAI slot
+ * @slots: number of slots
  * @hck_rate: clock rate of desired HCKx clock
  * @sck_rate: clock rate of desired SCKx clock
  * @hck_dir: the direction of HCKx pads
@@ -55,6 +56,7 @@ struct fsl_esai {
 	struct clk *fsysclk;
 	u32 fifo_depth;
 	u32 slot_width;
+	u32 slots;
 	u32 hck_rate[2];
 	u32 sck_rate[2];
 	bool hck_dir[2];
@@ -362,6 +364,7 @@ static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask,
 			   ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
 
 	esai_priv->slot_width = slot_width;
+	esai_priv->slots = slots;
 
 	return 0;
 }
@@ -509,10 +512,11 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	u32 width = snd_pcm_format_width(params_format(params));
 	u32 channels = params_channels(params);
+	u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
 	u32 bclk, mask, val;
 	int ret;
 
-	bclk = params_rate(params) * esai_priv->slot_width * 2;
+	bclk = params_rate(params) * esai_priv->slot_width * esai_priv->slots;
 
 	ret = fsl_esai_set_bclk(dai, tx, bclk);
 	if (ret)
@@ -529,7 +533,7 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 	mask = ESAI_xFCR_xFR_MASK | ESAI_xFCR_xWA_MASK | ESAI_xFCR_xFWM_MASK |
 	      (tx ? ESAI_xFCR_TE_MASK | ESAI_xFCR_TIEN : ESAI_xFCR_RE_MASK);
 	val = ESAI_xFCR_xWA(width) | ESAI_xFCR_xFWM(esai_priv->fifo_depth) |
-	     (tx ? ESAI_xFCR_TE(channels) | ESAI_xFCR_TIEN : ESAI_xFCR_RE(channels));
+	     (tx ? ESAI_xFCR_TE(pins) | ESAI_xFCR_TIEN : ESAI_xFCR_RE(pins));
 
 	regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), mask, val);
 
@@ -564,6 +568,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
 	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	u8 i, channels = substream->runtime->channels;
+	u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
@@ -578,7 +583,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
 
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
 				   tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
-				   tx ? ESAI_xCR_TE(channels) : ESAI_xCR_RE(channels));
+				   tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_STOP:
@@ -705,7 +710,7 @@ static bool fsl_esai_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config fsl_esai_regmap_config = {
+static const struct regmap_config fsl_esai_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
@@ -731,9 +736,6 @@ static int fsl_esai_probe(struct platform_device *pdev)
 	esai_priv->pdev = pdev;
 	strcpy(esai_priv->name, np->name);
 
-	if (of_property_read_bool(np, "big-endian"))
-		fsl_esai_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
 	/* Get the addresses and IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(&pdev->dev, res);
@@ -781,6 +783,9 @@ static int fsl_esai_probe(struct platform_device *pdev)
 	/* Set a default slot size */
 	esai_priv->slot_width = 32;
 
+	/* Set a default slot number */
+	esai_priv->slots = 2;
+
 	/* Set a default master/slave state */
 	esai_priv->slave_mode = true;
 

sound/soc/fsl/fsl_esai.h

@@ -130,8 +130,8 @@
 #define ESAI_xFCR_RE_WIDTH	4
 #define ESAI_xFCR_TE_MASK	(((1 << ESAI_xFCR_TE_WIDTH) - 1) << ESAI_xFCR_xE_SHIFT)
 #define ESAI_xFCR_RE_MASK	(((1 << ESAI_xFCR_RE_WIDTH) - 1) << ESAI_xFCR_xE_SHIFT)
-#define ESAI_xFCR_TE(x) 	((ESAI_xFCR_TE_MASK >> (ESAI_xFCR_TE_WIDTH - ((x + 1) >> 1))) & ESAI_xFCR_TE_MASK)
-#define ESAI_xFCR_RE(x) 	((ESAI_xFCR_RE_MASK >> (ESAI_xFCR_RE_WIDTH - ((x + 1) >> 1))) & ESAI_xFCR_RE_MASK)
+#define ESAI_xFCR_TE(x) 	((ESAI_xFCR_TE_MASK >> (ESAI_xFCR_TE_WIDTH - x)) & ESAI_xFCR_TE_MASK)
+#define ESAI_xFCR_RE(x) 	((ESAI_xFCR_RE_MASK >> (ESAI_xFCR_RE_WIDTH - x)) & ESAI_xFCR_RE_MASK)
 #define ESAI_xFCR_xFR_SHIFT	1
 #define ESAI_xFCR_xFR_MASK	(1 << ESAI_xFCR_xFR_SHIFT)
 #define ESAI_xFCR_xFR		(1 << ESAI_xFCR_xFR_SHIFT)
@@ -272,8 +272,8 @@
 #define ESAI_xCR_RE_WIDTH	4
 #define ESAI_xCR_TE_MASK	(((1 << ESAI_xCR_TE_WIDTH) - 1) << ESAI_xCR_xE_SHIFT)
 #define ESAI_xCR_RE_MASK	(((1 << ESAI_xCR_RE_WIDTH) - 1) << ESAI_xCR_xE_SHIFT)
-#define ESAI_xCR_TE(x) 		((ESAI_xCR_TE_MASK >> (ESAI_xCR_TE_WIDTH - ((x + 1) >> 1))) & ESAI_xCR_TE_MASK)
-#define ESAI_xCR_RE(x) 		((ESAI_xCR_RE_MASK >> (ESAI_xCR_RE_WIDTH - ((x + 1) >> 1))) & ESAI_xCR_RE_MASK)
+#define ESAI_xCR_TE(x) 		((ESAI_xCR_TE_MASK >> (ESAI_xCR_TE_WIDTH - x)) & ESAI_xCR_TE_MASK)
+#define ESAI_xCR_RE(x) 		((ESAI_xCR_RE_MASK >> (ESAI_xCR_RE_WIDTH - x)) & ESAI_xCR_RE_MASK)
 
 /*
  * Transmit Clock Control Register -- REG_ESAI_TCCR 0xD8

sound/soc/fsl/fsl_sai.c

@@ -539,7 +539,7 @@ static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config fsl_sai_regmap_config = {
+static const struct regmap_config fsl_sai_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
@@ -568,10 +568,6 @@ static int fsl_sai_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai"))
 		sai->sai_on_imx = true;
 
-	sai->big_endian_regs = of_property_read_bool(np, "big-endian-regs");
-	if (sai->big_endian_regs)
-		fsl_sai_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
 	sai->big_endian_data = of_property_read_bool(np, "big-endian-data");
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

sound/soc/fsl/fsl_sai.h

@@ -131,7 +131,6 @@ struct fsl_sai {
 	struct clk *bus_clk;
 	struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
 
-	bool big_endian_regs;
 	bool big_endian_data;
 	bool is_dsp_mode;
 	bool sai_on_imx;

sound/soc/fsl/fsl_spdif.c

@@ -1040,7 +1040,7 @@ static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static struct regmap_config fsl_spdif_regmap_config = {
+static const struct regmap_config fsl_spdif_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
@@ -1184,9 +1184,6 @@ static int fsl_spdif_probe(struct platform_device *pdev)
 	memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
 	spdif_priv->cpu_dai_drv.name = spdif_priv->name;
 
-	if (of_property_read_bool(np, "big-endian"))
-		fsl_spdif_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
 	/* Get the addresses and IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs = devm_ioremap_resource(&pdev->dev, res);

sound/soc/fsl/imx-es8328.c

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/i2c.h>
+#include <linux/of_gpio.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "imx-audmux.h"
+
+#define DAI_NAME_SIZE	32
+#define MUX_PORT_MAX	7
+
+struct imx_es8328_data {
+	struct device *dev;
+	struct snd_soc_dai_link dai;
+	struct snd_soc_card card;
+	char codec_dai_name[DAI_NAME_SIZE];
+	char platform_name[DAI_NAME_SIZE];
+	int jack_gpio;
+};
+
+static struct snd_soc_jack_gpio headset_jack_gpios[] = {
+	{
+		.gpio = -1,
+		.name = "headset-gpio",
+		.report = SND_JACK_HEADSET,
+		.invert = 0,
+		.debounce_time = 200,
+	},
+};
+
+static struct snd_soc_jack headset_jack;
+
+static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct imx_es8328_data *data = container_of(rtd->card,
+					struct imx_es8328_data, card);
+	int ret = 0;
+
+	/* Headphone jack detection */
+	if (gpio_is_valid(data->jack_gpio)) {
+		ret = snd_soc_jack_new(rtd->codec, "Headphone",
+				       SND_JACK_HEADPHONE | SND_JACK_BTN_0,
+				       &headset_jack);
+		if (ret)
+			return ret;
+
+		headset_jack_gpios[0].gpio = data->jack_gpio;
+		ret = snd_soc_jack_add_gpios(&headset_jack,
+					     ARRAY_SIZE(headset_jack_gpios),
+					     headset_jack_gpios);
+	}
+
+	return ret;
+}
+
+static const struct snd_soc_dapm_widget imx_es8328_dapm_widgets[] = {
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+	SND_SOC_DAPM_REGULATOR_SUPPLY("audio-amp", 1, 0),
+};
+
+static int imx_es8328_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *ssi_np, *codec_np;
+	struct platform_device *ssi_pdev;
+	struct imx_es8328_data *data;
+	u32 int_port, ext_port;
+	int ret;
+	struct device *dev = &pdev->dev;
+
+	ret = of_property_read_u32(np, "mux-int-port", &int_port);
+	if (ret) {
+		dev_err(dev, "mux-int-port missing or invalid\n");
+		goto fail;
+	}
+	if (int_port > MUX_PORT_MAX || int_port == 0) {
+		dev_err(dev, "mux-int-port: hardware only has %d mux ports\n",
+			MUX_PORT_MAX);
+		goto fail;
+	}
+
+	ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
+	if (ret) {
+		dev_err(dev, "mux-ext-port missing or invalid\n");
+		goto fail;
+	}
+	if (ext_port > MUX_PORT_MAX || ext_port == 0) {
+		dev_err(dev, "mux-ext-port: hardware only has %d mux ports\n",
+			MUX_PORT_MAX);
+		goto fail;
+	}
+
+	/*
+	 * The port numbering in the hardware manual starts at 1, while
+	 * the audmux API expects it starts at 0.
+	 */
+	int_port--;
+	ext_port--;
+	ret = imx_audmux_v2_configure_port(int_port,
+			IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
+	if (ret) {
+		dev_err(dev, "audmux internal port setup failed\n");
+		return ret;
+	}
+	ret = imx_audmux_v2_configure_port(ext_port,
+			IMX_AUDMUX_V2_PTCR_SYN,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
+	if (ret) {
+		dev_err(dev, "audmux external port setup failed\n");
+		return ret;
+	}
+
+	ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0);
+	codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
+	if (!ssi_np || !codec_np) {
+		dev_err(dev, "phandle missing or invalid\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	ssi_pdev = of_find_device_by_node(ssi_np);
+	if (!ssi_pdev) {
+		dev_err(dev, "failed to find SSI platform device\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	data->dev = dev;
+
+	data->jack_gpio = of_get_named_gpio(pdev->dev.of_node, "jack-gpio", 0);
+
+	data->dai.name = "hifi";
+	data->dai.stream_name = "hifi";
+	data->dai.codec_dai_name = "es8328-hifi-analog";
+	data->dai.codec_of_node = codec_np;
+	data->dai.cpu_of_node = ssi_np;
+	data->dai.platform_of_node = ssi_np;
+	data->dai.init = &imx_es8328_dai_init;
+	data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+			    SND_SOC_DAIFMT_CBM_CFM;
+
+	data->card.dev = dev;
+	data->card.dapm_widgets = imx_es8328_dapm_widgets;
+	data->card.num_dapm_widgets = ARRAY_SIZE(imx_es8328_dapm_widgets);
+	ret = snd_soc_of_parse_card_name(&data->card, "model");
+	if (ret) {
+		dev_err(dev, "Unable to parse card name\n");
+		goto fail;
+	}
+	ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
+	if (ret) {
+		dev_err(dev, "Unable to parse routing: %d\n", ret);
+		goto fail;
+	}
+	data->card.num_links = 1;
+	data->card.owner = THIS_MODULE;
+	data->card.dai_link = &data->dai;
+
+	ret = snd_soc_register_card(&data->card);
+	if (ret) {
+		dev_err(dev, "Unable to register: %d\n", ret);
+		goto fail;
+	}
+
+	platform_set_drvdata(pdev, data);
+fail:
+	of_node_put(ssi_np);
+	of_node_put(codec_np);
+
+	return ret;
+}
+
+static int imx_es8328_remove(struct platform_device *pdev)
+{
+	struct imx_es8328_data *data = platform_get_drvdata(pdev);
+
+	snd_soc_jack_free_gpios(&headset_jack, ARRAY_SIZE(headset_jack_gpios),
+				headset_jack_gpios);
+
+	snd_soc_unregister_card(&data->card);
+
+	return 0;
+}
+
+static const struct of_device_id imx_es8328_dt_ids[] = {
+	{ .compatible = "fsl,imx-audio-es8328", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_es8328_dt_ids);
+
+static struct platform_driver imx_es8328_driver = {
+	.driver = {
+		.name = "imx-es8328",
+		.of_match_table = imx_es8328_dt_ids,
+	},
+	.probe = imx_es8328_probe,
+	.remove = imx_es8328_remove,
+};
+module_platform_driver(imx_es8328_driver);
+
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_DESCRIPTION("Kosagi i.MX6 ES8328 ASoC machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-audio-es8328");