ACPI: PMIC: Add comments with DSDT power opregion field names

The DSDTs of CHT devices using the Dollar Cove TI PMIC, all use
LDO1 - LDO14 names for the DSDT power opregion field names.

Add comments with these fields to make it easier to see which PMIC
registers are being set by ACPI code using these.

Note that LDO4 is missing and the mapped registers jump from 0x43
to 0x45 to match. This matches with how the fields are declared
in the DSDT where LDO4 is skipped too. Note there is no hole in
the field addresses, LDO4 is simply just not defined on either side.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/acpi/pmic/intel_pmic_chtdc_ti.c

@@ -20,19 +20,19 @@
 #define CHTDC_TI_GPADC		0x5a
 
 static struct pmic_table chtdc_ti_power_table[] = {
-	{ .address = 0x00, .reg = 0x41 },
-	{ .address = 0x04, .reg = 0x42 },
-	{ .address = 0x08, .reg = 0x43 },
-	{ .address = 0x0c, .reg = 0x45 },
-	{ .address = 0x10, .reg = 0x46 },
-	{ .address = 0x14, .reg = 0x47 },
-	{ .address = 0x18, .reg = 0x48 },
-	{ .address = 0x1c, .reg = 0x49 },
-	{ .address = 0x20, .reg = 0x4a },
-	{ .address = 0x24, .reg = 0x4b },
-	{ .address = 0x28, .reg = 0x4c },
-	{ .address = 0x2c, .reg = 0x4d },
-	{ .address = 0x30, .reg = 0x4e },
+	{ .address = 0x00, .reg = 0x41 }, /* LDO1 */
+	{ .address = 0x04, .reg = 0x42 }, /* LDO2 */
+	{ .address = 0x08, .reg = 0x43 }, /* LDO3 */
+	{ .address = 0x0c, .reg = 0x45 }, /* LDO5 */
+	{ .address = 0x10, .reg = 0x46 }, /* LDO6 */
+	{ .address = 0x14, .reg = 0x47 }, /* LDO7 */
+	{ .address = 0x18, .reg = 0x48 }, /* LDO8 */
+	{ .address = 0x1c, .reg = 0x49 }, /* LDO9 */
+	{ .address = 0x20, .reg = 0x4a }, /* LD10 */
+	{ .address = 0x24, .reg = 0x4b }, /* LD11 */
+	{ .address = 0x28, .reg = 0x4c }, /* LD12 */
+	{ .address = 0x2c, .reg = 0x4d }, /* LD13 */
+	{ .address = 0x30, .reg = 0x4e }, /* LD14 */
 };
 
 static struct pmic_table chtdc_ti_thermal_table[] = {