Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt

+Lantiq SoC External Bus memory mapped GPIO controller
+
+By attaching hardware latches to the EBU it is possible to create output
+only gpios. This driver configures a special memory address, which when
+written to outputs 16 bit to the latches.
+
+The node describing the memory mapped GPIOs needs to be a child of the node
+describing the "lantiq,localbus".
+
+Required properties:
+- compatible : Should be "lantiq,gpio-mm-lantiq"
+- reg : Address and length of the register set for the device
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters (currently
+  unused).
+- gpio-controller : Marks the device node as a gpio controller.
+
+Optional properties:
+- lantiq,shadow : The default value that we shall assume as already set on the
+  shift register cascade.
+
+Example:
+
+localbus@0 {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+		1 0 0x4000000 0x4000010>; /* addsel1 */
+	compatible = "lantiq,localbus", "simple-bus";
+
+	gpio_mm0: gpio@4000000 {
+		compatible = "lantiq,gpio-mm";
+		reg = <1 0x0 0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		lantiq,shadow = <0x77f>
+	};
+}

Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt

+Lantiq SoC Serial To Parallel (STP) GPIO controller
+
+The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+peripheral controller used to drive external shift register cascades. At most
+3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+to drive the 2 LSBs of the cascade automatically.
+
+
+Required properties:
+- compatible : Should be "lantiq,gpio-stp-xway"
+- reg : Address and length of the register set for the device
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters (currently
+  unused).
+- gpio-controller : Marks the device node as a gpio controller.
+
+Optional properties:
+- lantiq,shadow : The default value that we shall assume as already set on the
+  shift register cascade.
+- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled
+  in the shift register cascade.
+- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
+  property can enable this feature.
+- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade.
+- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade.
+- lantiq,rising : use rising instead of falling edge for the shift register
+
+Example:
+
+gpio1: stp@E100BB0 {
+	compatible = "lantiq,gpio-stp-xway";
+	reg = <0xE100BB0 0x40>;
+	#gpio-cells = <2>;
+	gpio-controller;
+
+	lantiq,shadow = <0xffff>;
+	lantiq,groups = <0x7>;
+	lantiq,dsl = <0x3>;
+	lantiq,phy1 = <0x7>;
+	lantiq,phy2 = <0x7>;
+	/* lantiq,rising; */
+};

arch/mips/Kconfig

@@ -233,8 +233,9 @@ config LANTIQ
 	select ARCH_REQUIRE_GPIOLIB
 	select SWAP_IO_SPACE
 	select BOOT_RAW
-	select HAVE_CLK
-	select MIPS_MACHINE
+	select HAVE_MACH_CLKDEV
+	select CLKDEV_LOOKUP
+	select USE_OF
 
 config LASAT
 	bool "LASAT Networks platforms"
@@ -1783,10 +1784,12 @@ endchoice
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
-	range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
-	default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
-	range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
-	default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB
+	default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB
+	range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB
+	default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB
+	range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB
+	default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB
 	range 11 64
 	default "11"
 	help

arch/mips/alchemy/devboards/db1200.c

@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>

arch/mips/ath79/Kconfig

@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
 	  Say 'Y' here if you want your kernel to support the
 	  Atheros AP81 reference board.
 
+config ATH79_MACH_DB120
+	bool "Atheros DB120 reference board"
+	select SOC_AR934X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Atheros DB120 reference board.
+
 config ATH79_MACH_PB44
 	bool "Atheros PB44 reference board"
 	select SOC_AR71XX
@@ -52,12 +64,14 @@ endmenu
 config SOC_AR71XX
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select HW_HAS_PCI
 	def_bool n
 
 config SOC_AR724X
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
 	select HW_HAS_PCI
+	select PCI_AR724X if PCI
 	def_bool n
 
 config SOC_AR913X
@@ -68,6 +82,15 @@ config SOC_AR933X
 	select USB_ARCH_HAS_EHCI
 	def_bool n
 
+config SOC_AR934X
+	select USB_ARCH_HAS_EHCI
+	select HW_HAS_PCI
+	select PCI_AR724X if PCI
+	def_bool n
+
+config PCI_AR724X
+	def_bool n
+
 config ATH79_DEV_GPIO_BUTTONS
 	def_bool n
 
@@ -81,7 +104,7 @@ config ATH79_DEV_USB
 	def_bool n
 
 config ATH79_DEV_WMAC
-	depends on (SOC_AR913X || SOC_AR933X)
+	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
 	def_bool n
 
 endif

arch/mips/ath79/Makefile

@@ -11,6 +11,7 @@
 obj-y	:= prom.o setup.o irq.o common.o clock.o gpio.o
 
 obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
+obj-$(CONFIG_PCI)			+= pci.o
 
 #
 # Devices
@@ -27,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
 #
 obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
 obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
 obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
 obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o

arch/mips/ath79/clock.c

 /*
  *  Atheros AR71XX/AR724X/AR913X common routines
  *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
  *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  *
+ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(void)
 	ath79_uart_clk.rate = ath79_ref_clk.rate;
 }
 
+static void __init ar934x_clocks_init(void)
+{
+	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+	u32 cpu_pll, ddr_pll;
+	u32 bootstrap;
+
+	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+	if (bootstrap &	AR934X_BOOTSTRAP_REF_CLK_40)
+		ath79_ref_clk.rate = 40 * 1000 * 1000;
+	else
+		ath79_ref_clk.rate = 25 * 1000 * 1000;
+
+	pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+	out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		  AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		  AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+	nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+	       AR934X_PLL_CPU_CONFIG_NINT_MASK;
+	frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+	       AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+
+	cpu_pll = nint * ath79_ref_clk.rate / ref_div;
+	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
+	cpu_pll /= (1 << out_div);
+
+	pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+	out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+		  AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+		  AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+	nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+	       AR934X_PLL_DDR_CONFIG_NINT_MASK;
+	frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+	       AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+
+	ddr_pll = nint * ath79_ref_clk.rate / ref_div;
+	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
+	ddr_pll /= (1 << out_div);
+
+	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+		  AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
+
+	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
+		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+		ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+	else
+		ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+		  AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
+
+	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
+		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+		ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+	else
+		ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+		  AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
+
+	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
+		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+		ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+	else
+		ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+
+	ath79_wdt_clk.rate = ath79_ref_clk.rate;
+	ath79_uart_clk.rate = ath79_ref_clk.rate;
+}
+
 void __init ath79_clocks_init(void)
 {
 	if (soc_is_ar71xx())
@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void)
 		ar913x_clocks_init();
 	else if (soc_is_ar933x())
 		ar933x_clocks_init();
+	else if (soc_is_ar934x())
+		ar934x_clocks_init();
 	else
 		BUG();
 

arch/mips/ath79/common.c

 /*
  *  Atheros AR71XX/AR724X/AR913X common routines
  *
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
+ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask)
 		reg = AR913X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar933x())
 		reg = AR933X_RESET_REG_RESET_MODULE;
+	else if (soc_is_ar934x())
+		reg = AR934X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 
@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask)
 		reg = AR913X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar933x())
 		reg = AR933X_RESET_REG_RESET_MODULE;
+	else if (soc_is_ar934x())
+		reg = AR934X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 

arch/mips/ath79/dev-common.c

@@ -89,7 +89,8 @@ void __init ath79_register_uart(void)
 
 	if (soc_is_ar71xx() ||
 	    soc_is_ar724x() ||
-	    soc_is_ar913x()) {
+	    soc_is_ar913x() ||
+	    soc_is_ar934x()) {
 		ath79_uart_data[0].uartclk = clk_get_rate(clk);
 		platform_device_register(&ath79_uart_device);
 	} else if (soc_is_ar933x()) {

arch/mips/ath79/dev-gpio-buttons.c

@@ -25,12 +25,10 @@ void __init ath79_register_gpio_keys_polled(int id,
 	struct gpio_keys_button *p;
 	int err;
 
-	p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
+	p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
 	if (!p)
 		return;
 
-	memcpy(p, buttons, nbuttons * sizeof(*p));
-
 	pdev = platform_device_alloc("gpio-keys-polled", id);
 	if (!pdev)
 		goto err_free_buttons;

arch/mips/ath79/dev-leds-gpio.c

@@ -24,12 +24,10 @@ void __init ath79_register_leds_gpio(int id,
 	struct gpio_led *p;
 	int err;
 
-	p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
+	p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
 	if (!p)
 		return;
 
-	memcpy(p, leds, num_leds * sizeof(*p));
-
 	pdev = platform_device_alloc("leds-gpio", id);
 	if (!pdev)
 		goto err_free_leds;

arch/mips/ath79/dev-wmac.c

 /*
  *  Atheros AR913X/AR933X SoC built-in WMAC device support
  *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
  *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
+ *  Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resources[] = {
 		/* .start and .end fields are filled dynamically */
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= ATH79_CPU_IRQ_IP2,
-		.end	= ATH79_CPU_IRQ_IP2,
+		/* .start and .end fields are filled dynamically */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(void)
 
 	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
 	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+	ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
+	ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
 }
 
 
@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(void)
 
 	ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
 	ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
+	ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
+	ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
 
 	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
 	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(void)
 	ath79_wmac_data.external_reset = ar933x_wmac_reset;
 }
 
+static void ar934x_wmac_setup(void)
+{
+	u32 t;
+
+	ath79_wmac_device.name = "ar934x_wmac";
+
+	ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
+	ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
+	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+
+	t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+	if (t & AR934X_BOOTSTRAP_REF_CLK_40)
+		ath79_wmac_data.is_clk_25mhz = false;
+	else
+		ath79_wmac_data.is_clk_25mhz = true;
+}
+
 void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
 	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
+	else if (soc_is_ar934x())
+		ar934x_wmac_setup();
 	else
 		BUG();
 

arch/mips/ath79/early_printk.c

@@ -71,6 +71,9 @@ static void prom_putchar_init(void)
 	case REV_ID_MAJOR_AR7241:
 	case REV_ID_MAJOR_AR7242:
 	case REV_ID_MAJOR_AR913X:
+	case REV_ID_MAJOR_AR9341:
+	case REV_ID_MAJOR_AR9342:
+	case REV_ID_MAJOR_AR9344:
 		_prom_putchar = prom_putchar_ar71xx;
 		break;
 

arch/mips/ath79/gpio.c

 /*
  *  Atheros AR71XX/AR724X/AR913X GPIO API support
  *
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
+ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = ath79_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ath79_gpio_lock, flags);
+
+	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
+		     base + AR71XX_GPIO_REG_OE);
+
+	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+
+	return 0;
+}
+
+static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	void __iomem *base = ath79_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ath79_gpio_lock, flags);
+
+	if (value)
+		__raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
+	else
+		__raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
+
+	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
+		     base + AR71XX_GPIO_REG_OE);
+
+	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+
+	return 0;
+}
+
 static struct gpio_chip ath79_gpio_chip = {
 	.label			= "ath79",
 	.get			= ath79_gpio_get_value,
@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void)
 		ath79_gpio_count = AR913X_GPIO_COUNT;
 	else if (soc_is_ar933x())
 		ath79_gpio_count = AR933X_GPIO_COUNT;
+	else if (soc_is_ar934x())
+		ath79_gpio_count = AR934X_GPIO_COUNT;
 	else
 		BUG();
 
 	ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
 	ath79_gpio_chip.ngpio = ath79_gpio_count;
+	if (soc_is_ar934x()) {
+		ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+		ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+	}
 
 	err = gpiochip_add(&ath79_gpio_chip);
 	if (err)

arch/mips/ath79/irq.c

 /*
  *  Atheros AR71xx/AR724x/AR913x specific interrupt handling
  *
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
- *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -23,8 +24,8 @@
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include "common.h"
 
-static unsigned int ath79_ip2_flush_reg;
-static unsigned int ath79_ip3_flush_reg;
+static void (*ath79_ip2_handler)(void);
+static void (*ath79_ip3_handler)(void);
 
 static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(void)
 
 	if (soc_is_ar71xx() || soc_is_ar913x())
 		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x() || soc_is_ar933x())
+	else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
 	else
 		BUG();
@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(void)
 	irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
 }
 
+static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+	u32 status;
+
+	disable_irq_nosync(irq);
+
+	status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
+
+	if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
+		ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
+		generic_handle_irq(ATH79_IP2_IRQ(0));
+	} else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
+		ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
+		generic_handle_irq(ATH79_IP2_IRQ(1));
+	} else {
+		spurious_interrupt();
+	}
+
+	enable_irq(irq);
+}
+
+static void ar934x_ip2_irq_init(void)
+{
+	int i;
+
+	for (i = ATH79_IP2_IRQ_BASE;
+	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+		irq_set_chip_and_handler(i, &dummy_irq_chip,
+					 handle_level_irq);
+
+	irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
+}
+
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned long pending;
@@ -152,10 +186,8 @@ asmlinkage void plat_irq_dispatch(void)
 	if (pending & STATUSF_IP7)
 		do_IRQ(ATH79_CPU_IRQ_TIMER);
 
-	else if (pending & STATUSF_IP2) {
-		ath79_ddr_wb_flush(ath79_ip2_flush_reg);
-		do_IRQ(ATH79_CPU_IRQ_IP2);
-	}
+	else if (pending & STATUSF_IP2)
+		ath79_ip2_handler();
 
 	else if (pending & STATUSF_IP4)
 		do_IRQ(ATH79_CPU_IRQ_GE0);
@@ -163,10 +195,8 @@ asmlinkage void plat_irq_dispatch(void)
 	else if (pending & STATUSF_IP5)
 		do_IRQ(ATH79_CPU_IRQ_GE1);
 
-	else if (pending & STATUSF_IP3) {
-		ath79_ddr_wb_flush(ath79_ip3_flush_reg);
-		do_IRQ(ATH79_CPU_IRQ_USB);
-	}
+	else if (pending & STATUSF_IP3)
+		ath79_ip3_handler();
 
 	else if (pending & STATUSF_IP6)
 		do_IRQ(ATH79_CPU_IRQ_MISC);
@@ -175,24 +205,97 @@ asmlinkage void plat_irq_dispatch(void)
 		spurious_interrupt();
 }
 
+/*
+ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
+ * these devices typically allocate coherent DMA memory, however the
+ * DMA controller may still have some unsynchronized data in the FIFO.
+ * Issue a flush in the handlers to ensure that the driver sees
+ * the update.
+ */
+static void ar71xx_ip2_handler(void)
+{
+	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
+	do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar724x_ip2_handler(void)
+{
+	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
+	do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar913x_ip2_handler(void)
+{
+	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
+	do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar933x_ip2_handler(void)
+{
+	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
+	do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar934x_ip2_handler(void)
+{
+	do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ar71xx_ip3_handler(void)
+{
+	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
+	do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar724x_ip3_handler(void)
+{
+	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
+	do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar913x_ip3_handler(void)
+{
+	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
+	do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar933x_ip3_handler(void)
+{
+	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
+	do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
+static void ar934x_ip3_handler(void)
+{
+	ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
+	do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
 void __init arch_init_irq(void)
 {
 	if (soc_is_ar71xx()) {
-		ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
-		ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB;
+		ath79_ip2_handler = ar71xx_ip2_handler;
+		ath79_ip3_handler = ar71xx_ip3_handler;
 	} else if (soc_is_ar724x()) {
-		ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
-		ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB;
+		ath79_ip2_handler = ar724x_ip2_handler;
+		ath79_ip3_handler = ar724x_ip3_handler;
 	} else if (soc_is_ar913x()) {
-		ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
-		ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
+		ath79_ip2_handler = ar913x_ip2_handler;
+		ath79_ip3_handler = ar913x_ip3_handler;
 	} else if (soc_is_ar933x()) {
-		ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
-		ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
-	} else
+		ath79_ip2_handler = ar933x_ip2_handler;
+		ath79_ip3_handler = ar933x_ip3_handler;
+	} else if (soc_is_ar934x()) {
+		ath79_ip2_handler = ar934x_ip2_handler;
+		ath79_ip3_handler = ar934x_ip3_handler;
+	} else {
 		BUG();
+	}
 
 	cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
 	mips_cpu_irq_init();
 	ath79_misc_irq_init();
+
+	if (soc_is_ar934x())
+		ar934x_ip2_irq_init();
 }

arch/mips/ath79/mach-db120.c

+/*
+ * Atheros DB120 reference board support
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "pci.h"
+
+#define DB120_GPIO_LED_WLAN_5G		12
+#define DB120_GPIO_LED_WLAN_2G		13
+#define DB120_GPIO_LED_STATUS		14
+#define DB120_GPIO_LED_WPS		15
+
+#define DB120_GPIO_BTN_WPS		16
+
+#define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
+#define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
+
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led db120_leds_gpio[] __initdata = {
+	{
+		.name		= "db120:green:status",
+		.gpio		= DB120_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "db120:green:wps",
+		.gpio		= DB120_GPIO_LED_WPS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "db120:green:wlan-5g",
+		.gpio		= DB120_GPIO_LED_WLAN_5G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "db120:green:wlan-2g",
+		.gpio		= DB120_GPIO_LED_WLAN_2G,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DB120_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+};
+
+static struct spi_board_info db120_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "s25sl064a",
+	}
+};
+
+static struct ath79_spi_platform_data db120_spi_data = {
+	.bus_num	= 0,
+	.num_chipselect	= 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data db120_ath9k_data;
+
+static int db120_pci_plat_dev_init(struct pci_dev *dev)
+{
+	switch (PCI_SLOT(dev->devfn)) {
+	case 0:
+		dev->dev.platform_data = &db120_ath9k_data;
+		break;
+	}
+
+	return 0;
+}
+
+static void __init db120_pci_init(u8 *eeprom)
+{
+	memcpy(db120_ath9k_data.eeprom_data, eeprom,
+	       sizeof(db120_ath9k_data.eeprom_data));
+
+	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+	ath79_register_pci();
+}
+#else
+static inline void db120_pci_init(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init db120_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+				 db120_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(db120_gpio_keys),
+					db120_gpio_keys);
+	ath79_register_spi(&db120_spi_data, db120_spi_info,
+			   ARRAY_SIZE(db120_spi_info));
+	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+	     db120_setup);

arch/mips/ath79/mach-pb44.c

@@ -19,6 +19,7 @@
 #include "dev-leds-gpio.h"
 #include "dev-spi.h"
 #include "dev-usb.h"
+#include "pci.h"
 
 #define PB44_GPIO_I2C_SCL	0
 #define PB44_GPIO_I2C_SDA	1
@@ -114,6 +115,7 @@ static void __init pb44_init(void)
 	ath79_register_spi(&pb44_spi_data, pb44_spi_info,
 			   ARRAY_SIZE(pb44_spi_info));
 	ath79_register_usb();
+	ath79_register_pci();
 }
 
 MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",

arch/mips/ath79/mach-ubnt-xm.c

@@ -12,16 +12,15 @@
 
 #include <linux/init.h>
 #include <linux/pci.h>
-
-#ifdef CONFIG_PCI
 #include <linux/ath9k_platform.h>
-#include <asm/mach-ath79/pci-ath724x.h>
-#endif /* CONFIG_PCI */
+
+#include <asm/mach-ath79/irq.h>
 
 #include "machtypes.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-spi.h"
+#include "pci.h"
 
 #define UBNT_XM_GPIO_LED_L1		0
 #define UBNT_XM_GPIO_LED_L2		1
@@ -33,7 +32,6 @@
 #define UBNT_XM_KEYS_POLL_INTERVAL	20
 #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
 
-#define UBNT_XM_PCI_IRQ			48
 #define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
 
 static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
@@ -84,12 +82,27 @@ static struct ath79_spi_platform_data ubnt_xm_spi_data = {
 #ifdef CONFIG_PCI
 static struct ath9k_platform_data ubnt_xm_eeprom_data;
 
-static struct ath724x_pci_data ubnt_xm_pci_data[] = {
-	{
-		.irq	= UBNT_XM_PCI_IRQ,
-		.pdata	= &ubnt_xm_eeprom_data,
-	},
-};
+static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+{
+	switch (PCI_SLOT(dev->devfn)) {
+	case 0:
+		dev->dev.platform_data = &ubnt_xm_eeprom_data;
+		break;
+	}
+
+	return 0;
+}
+
+static void __init ubnt_xm_pci_init(void)
+{
+	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+	ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+	ath79_register_pci();
+}
+#else
+static inline void ubnt_xm_pci_init(void) {}
 #endif /* CONFIG_PCI */
 
 static void __init ubnt_xm_init(void)
@@ -104,13 +117,7 @@ static void __init ubnt_xm_init(void)
 	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
 			   ARRAY_SIZE(ubnt_xm_spi_info));
 
-#ifdef CONFIG_PCI
-	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
-	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
-	ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
-#endif /* CONFIG_PCI */
-
+	ubnt_xm_pci_init();
 }
 
 MIPS_MACHINE(ATH79_MACH_UBNT_XM,

arch/mips/ath79/machtypes.h

@@ -18,6 +18,7 @@ enum ath79_mach_type {
 	ATH79_MACH_GENERIC = 0,
 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
+	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
 };

arch/mips/ath79/pci.c

+/*
+ *  Atheros AR71XX/AR724X specific PCI setup code
+ *
+ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/pci.h>
+#include "pci.h"
+
+static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+static unsigned ath79_pci_nr_irqs __initdata;
+
+static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+	{
+		.slot	= 17,
+		.pin	= 1,
+		.irq	= ATH79_PCI_IRQ(0),
+	}, {
+		.slot	= 18,
+		.pin	= 1,
+		.irq	= ATH79_PCI_IRQ(1),
+	}, {
+		.slot	= 19,
+		.pin	= 1,
+		.irq	= ATH79_PCI_IRQ(2),
+	}
+};
+
+static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= ATH79_PCI_IRQ(0),
+	}
+};
+
+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+{
+	int irq = -1;
+	int i;
+
+	if (ath79_pci_nr_irqs == 0 ||
+	    ath79_pci_irq_map == NULL) {
+		if (soc_is_ar71xx()) {
+			ath79_pci_irq_map = ar71xx_pci_irq_map;
+			ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
+		} else if (soc_is_ar724x() ||
+			   soc_is_ar9342() ||
+			   soc_is_ar9344()) {
+			ath79_pci_irq_map = ar724x_pci_irq_map;
+			ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+		} else {
+			pr_crit("pci %s: invalid irq map\n",
+				pci_name((struct pci_dev *) dev));
+			return irq;
+		}
+	}
+
+	for (i = 0; i < ath79_pci_nr_irqs; i++) {
+		const struct ath79_pci_irq *entry;
+
+		entry = &ath79_pci_irq_map[i];
+		if (entry->slot == slot && entry->pin == pin) {
+			irq = entry->irq;
+			break;
+		}
+	}
+
+	if (irq < 0)
+		pr_crit("pci %s: no irq found for pin %u\n",
+			pci_name((struct pci_dev *) dev), pin);
+	else
+		pr_info("pci %s: using irq %d for pin %u\n",
+			pci_name((struct pci_dev *) dev), irq, pin);
+
+	return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	if (ath79_pci_plat_dev_init)
+		return ath79_pci_plat_dev_init(dev);
+
+	return 0;
+}
+
+void __init ath79_pci_set_irq_map(unsigned nr_irqs,
+				  const struct ath79_pci_irq *map)
+{
+	ath79_pci_nr_irqs = nr_irqs;
+	ath79_pci_irq_map = map;
+}
+
+void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
+{
+	ath79_pci_plat_dev_init = func;
+}
+
+int __init ath79_register_pci(void)
+{
+	if (soc_is_ar71xx())
+		return ar71xx_pcibios_init();
+
+	if (soc_is_ar724x())
+		return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+
+	if (soc_is_ar9342() || soc_is_ar9344()) {
+		u32 bootstrap;
+
+		bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+		if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
+			return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
+	}
+
+	return -ENODEV;
+}

arch/mips/ath79/pci.h

+/*
+ *  Atheros AR71XX/AR724X PCI support
+ *
+ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_PCI_H
+#define _ATH79_PCI_H
+
+struct ath79_pci_irq {
+	u8	slot;
+	u8	pin;
+	int	irq;
+};
+
+#ifdef CONFIG_PCI
+void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
+void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
+int ath79_register_pci(void);
+#else
+static inline void
+ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
+static inline void
+ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
+static inline int ath79_register_pci(void) { return 0; }
+#endif
+
+#endif /* _ATH79_PCI_H */

arch/mips/ath79/setup.c

 /*
  *  Atheros AR71XX/AR724X/AR913X specific setup
  *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
  *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
- *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -116,18 +117,6 @@ static void __init ath79_detect_sys_type(void)
 		rev = id & AR724X_REV_ID_REVISION_MASK;
 		break;
 
-	case REV_ID_MAJOR_AR9330:
-		ath79_soc = ATH79_SOC_AR9330;
-		chip = "9330";
-		rev = id & AR933X_REV_ID_REVISION_MASK;
-		break;
-
-	case REV_ID_MAJOR_AR9331:
-		ath79_soc = ATH79_SOC_AR9331;
-		chip = "9331";
-		rev = id & AR933X_REV_ID_REVISION_MASK;
-		break;
-
 	case REV_ID_MAJOR_AR913X:
 		minor = id & AR913X_REV_ID_MINOR_MASK;
 		rev = id >> AR913X_REV_ID_REVISION_SHIFT;
@@ -145,6 +134,36 @@ static void __init ath79_detect_sys_type(void)
 		}
 		break;
 
+	case REV_ID_MAJOR_AR9330:
+		ath79_soc = ATH79_SOC_AR9330;
+		chip = "9330";
+		rev = id & AR933X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_AR9331:
+		ath79_soc = ATH79_SOC_AR9331;
+		chip = "9331";
+		rev = id & AR933X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_AR9341:
+		ath79_soc = ATH79_SOC_AR9341;
+		chip = "9341";
+		rev = id & AR934X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_AR9342:
+		ath79_soc = ATH79_SOC_AR9342;
+		chip = "9342";
+		rev = id & AR934X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_AR9344:
+		ath79_soc = ATH79_SOC_AR9344;
+		chip = "9344";
+		rev = id & AR934X_REV_ID_REVISION_MASK;
+		break;
+
 	default:
 		panic("ath79: unknown SoC, id:0x%08x", id);
 	}

arch/mips/bcm63xx/boards/Makefile

 obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
-
-ccflags-y := -Werror

arch/mips/cavium-octeon/setup.c

@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/serial.h>

arch/mips/cavium-octeon/smp.c

@@ -257,8 +257,6 @@ DEFINE_PER_CPU(int, cpu_state);
 
 extern void fixup_irqs(void);
 
-static DEFINE_SPINLOCK(smp_reserve_lock);
-
 static int octeon_cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
@@ -266,8 +264,6 @@ static int octeon_cpu_disable(void)
 	if (cpu == 0)
 		return -EBUSY;
 
-	spin_lock(&smp_reserve_lock);
-
 	set_cpu_online(cpu, false);
 	cpu_clear(cpu, cpu_callin_map);
 	local_irq_disable();
@@ -277,8 +273,6 @@ static int octeon_cpu_disable(void)
 	flush_cache_all();
 	local_flush_tlb_all();
 
-	spin_unlock(&smp_reserve_lock);
-
 	return 0;
 }
 

arch/mips/fw/arc/Makefile

@@ -8,5 +8,3 @@ lib-y				+= cmdline.o env.o file.o identify.o init.o \
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o
 lib-$(CONFIG_ARC_PROMLIB)	+= promlib.o
-
-ccflags-y			:= -Werror

arch/mips/include/asm/clkdev.h

+/*
+ *  based on arch/arm/include/asm/clkdev.h
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#ifndef __ASM_CLKDEV_H
+#define __ASM_CLKDEV_H
+
+#include <linux/slab.h>
+
+#define __clk_get(clk)	({ 1; })
+#define __clk_put(clk)	do { } while (0)
+
+static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
+{
+	return kzalloc(size, GFP_KERNEL);
+}
+
+#endif

arch/mips/include/asm/mach-ath79/ar71xx_regs.h

 /*
  *  Atheros AR71XX/AR724X/AR913X SoC register definitions
  *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
  *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
- *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -60,6 +61,9 @@
 #define AR933X_EHCI_BASE	0x1b000000
 #define AR933X_EHCI_SIZE	0x1000
 
+#define AR934X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+#define AR934X_WMAC_SIZE	0x20000
+
 /*
  * DDR_CTRL block
  */
@@ -91,6 +95,12 @@
 #define AR933X_DDR_REG_FLUSH_USB	0x84
 #define AR933X_DDR_REG_FLUSH_WMAC	0x88
 
+#define AR934X_DDR_REG_FLUSH_GE0	0x9c
+#define AR934X_DDR_REG_FLUSH_GE1	0xa0
+#define AR934X_DDR_REG_FLUSH_USB	0xa4
+#define AR934X_DDR_REG_FLUSH_PCIE	0xa8
+#define AR934X_DDR_REG_FLUSH_WMAC	0xac
+
 /*
  * PLL block
  */
@@ -150,6 +160,41 @@
 #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT	15
 #define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK	0x7
 
+#define AR934X_PLL_CPU_CONFIG_REG		0x00
+#define AR934X_PLL_DDR_CONFIG_REG		0x04
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG		0x08
+
+#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT	6
+#define AR934X_PLL_CPU_CONFIG_NINT_MASK		0x3f
+#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT	12
+#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
+#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT	19
+#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK	0x3
+
+#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT	0
+#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK	0x3ff
+#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT	10
+#define AR934X_PLL_DDR_CONFIG_NINT_MASK		0x3f
+#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT	16
+#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK	0x1f
+#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT	23
+#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK	0x7
+
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS	BIT(2)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS	BIT(3)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS	BIT(4)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT	5
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK	0x1f
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT	10
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK	0x1f
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT	15
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK	0x1f
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL	BIT(20)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
+#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
+
 /*
  * USB_CONFIG block
  */
@@ -185,6 +230,10 @@
 #define AR933X_RESET_REG_RESET_MODULE		0x1c
 #define AR933X_RESET_REG_BOOTSTRAP		0xac
 
+#define AR934X_RESET_REG_RESET_MODULE		0x1c
+#define AR934X_RESET_REG_BOOTSTRAP		0xb0
+#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
+
 #define MISC_INT_ETHSW			BIT(12)
 #define MISC_INT_TIMER4			BIT(10)
 #define MISC_INT_TIMER3			BIT(9)
@@ -241,6 +290,40 @@
 
 #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
 
+#define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
+#define AR934X_BOOTSTRAP_SW_OPTION7	BIT(22)
+#define AR934X_BOOTSTRAP_SW_OPTION6	BIT(21)
+#define AR934X_BOOTSTRAP_SW_OPTION5	BIT(20)
+#define AR934X_BOOTSTRAP_SW_OPTION4	BIT(19)
+#define AR934X_BOOTSTRAP_SW_OPTION3	BIT(18)
+#define AR934X_BOOTSTRAP_SW_OPTION2	BIT(17)
+#define AR934X_BOOTSTRAP_SW_OPTION1	BIT(16)
+#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
+#define AR934X_BOOTSTRAP_PCIE_RC	BIT(6)
+#define AR934X_BOOTSTRAP_EJTAG_MODE	BIT(5)
+#define AR934X_BOOTSTRAP_REF_CLK_40	BIT(4)
+#define AR934X_BOOTSTRAP_BOOT_FROM_SPI	BIT(2)
+#define AR934X_BOOTSTRAP_SDRAM_DISABLED	BIT(1)
+#define AR934X_BOOTSTRAP_DDR1		BIT(0)
+
+#define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
+#define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
+#define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
+#define AR934X_PCIE_WMAC_INT_WMAC_RXHP		BIT(3)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC		BIT(4)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC0		BIT(5)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC1		BIT(6)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC2		BIT(7)
+#define AR934X_PCIE_WMAC_INT_PCIE_RC3		BIT(8)
+#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
+	(AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
+	 AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
+
+#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
+	(AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
+	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
+	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
+
 #define REV_ID_MAJOR_MASK		0xfff0
 #define REV_ID_MAJOR_AR71XX		0x00a0
 #define REV_ID_MAJOR_AR913X		0x00b0
@@ -249,6 +332,9 @@
 #define REV_ID_MAJOR_AR7242		0x1100
 #define REV_ID_MAJOR_AR9330		0x0110
 #define REV_ID_MAJOR_AR9331		0x1110
+#define REV_ID_MAJOR_AR9341		0x0120
+#define REV_ID_MAJOR_AR9342		0x1120
+#define REV_ID_MAJOR_AR9344		0x2120
 
 #define AR71XX_REV_ID_MINOR_MASK	0x3
 #define AR71XX_REV_ID_MINOR_AR7130	0x0
@@ -267,6 +353,8 @@
 
 #define AR724X_REV_ID_REVISION_MASK	0x3
 
+#define AR934X_REV_ID_REVISION_MASK     0xf
+
 /*
  * SPI block
  */
@@ -308,5 +396,6 @@
 #define AR724X_GPIO_COUNT		18
 #define AR913X_GPIO_COUNT		22
 #define AR933X_GPIO_COUNT		30
+#define AR934X_GPIO_COUNT		23
 
 #endif /* __ASM_MACH_AR71XX_REGS_H */

arch/mips/include/asm/mach-ath79/ath79.h

@@ -29,6 +29,9 @@ enum ath79_soc_type {
 	ATH79_SOC_AR9132,
 	ATH79_SOC_AR9330,
 	ATH79_SOC_AR9331,
+	ATH79_SOC_AR9341,
+	ATH79_SOC_AR9342,
+	ATH79_SOC_AR9344,
 };
 
 extern enum ath79_soc_type ath79_soc;
@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void)
 		ath79_soc == ATH79_SOC_AR9331);
 }
 
+static inline int soc_is_ar9341(void)
+{
+	return (ath79_soc == ATH79_SOC_AR9341);
+}
+
+static inline int soc_is_ar9342(void)
+{
+	return (ath79_soc == ATH79_SOC_AR9342);
+}
+
+static inline int soc_is_ar9344(void)
+{
+	return (ath79_soc == ATH79_SOC_AR9344);
+}
+
+static inline int soc_is_ar934x(void)
+{
+	return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+}
+
 extern void __iomem *ath79_ddr_base;
 extern void __iomem *ath79_pll_base;
 extern void __iomem *ath79_reset_base;

arch/mips/include/asm/mach-ath79/irq.h

@@ -10,11 +10,19 @@
 #define __ASM_MACH_ATH79_IRQ_H
 
 #define MIPS_CPU_IRQ_BASE	0
-#define NR_IRQS			40
+#define NR_IRQS			48
 
 #define ATH79_MISC_IRQ_BASE	8
 #define ATH79_MISC_IRQ_COUNT	32
 
+#define ATH79_PCI_IRQ_BASE	(ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
+#define ATH79_PCI_IRQ_COUNT	6
+#define ATH79_PCI_IRQ(_x)	(ATH79_PCI_IRQ_BASE + (_x))
+
+#define ATH79_IP2_IRQ_BASE	(ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT)
+#define ATH79_IP2_IRQ_COUNT	2
+#define ATH79_IP2_IRQ(_x)	(ATH79_IP2_IRQ_BASE + (_x))
+
 #define ATH79_CPU_IRQ_IP2	(MIPS_CPU_IRQ_BASE + 2)
 #define ATH79_CPU_IRQ_USB	(MIPS_CPU_IRQ_BASE + 3)
 #define ATH79_CPU_IRQ_GE0	(MIPS_CPU_IRQ_BASE + 4)

arch/mips/include/asm/mach-ath79/pci-ath724x.h → arch/mips/include/asm/mach-ath79/pci.h

 /*
- *  Atheros 724x PCI support
+ *  Atheros AR71XX/AR724X PCI support
  *
  *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
  */
 
-#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
-#define __ASM_MACH_ATH79_PCI_ATH724X_H
+#ifndef __ASM_MACH_ATH79_PCI_H
+#define __ASM_MACH_ATH79_PCI_H
 
-struct ath724x_pci_data {
-	int irq;
-	void *pdata;
-};
+#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
+int ar71xx_pcibios_init(void);
+#else
+static inline int ar71xx_pcibios_init(void) { return 0; }
+#endif
 
-void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
+#if defined(CONFIG_PCI_AR724X)
+int ar724x_pcibios_init(int irq);
+#else
+static inline int ar724x_pcibios_init(int irq) { return 0; }
+#endif
 
-#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
+#endif /* __ASM_MACH_ATH79_PCI_H */

arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h

@@ -2,6 +2,7 @@
 #define BCM63XX_GPIO_H
 
 #include <linux/init.h>
+#include <bcm63xx_cpu.h>
 
 int __init bcm63xx_gpio_init(void);
 

arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#ifndef _FALCON_IRQ__
+#define _FALCON_IRQ__
+
+#define INT_NUM_IRQ0			8
+#define INT_NUM_IM0_IRL0		(INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0		(INT_NUM_IM0_IRL0 + 32)
+#define INT_NUM_IM2_IRL0		(INT_NUM_IM1_IRL0 + 32)
+#define INT_NUM_IM3_IRL0		(INT_NUM_IM2_IRL0 + 32)
+#define INT_NUM_IM4_IRL0		(INT_NUM_IM3_IRL0 + 32)
+#define INT_NUM_EXTRA_START		(INT_NUM_IM4_IRL0 + 32)
+#define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define MIPS_CPU_TIMER_IRQ			7
+
+#endif /* _FALCON_IRQ__ */

arch/mips/lantiq/xway/setup-ase.c → arch/mips/include/asm/mach-lantiq/falcon/irq.h

@@ -3,17 +3,16 @@
  *  under the terms of the GNU General Public License version 2 as published
  *  by the Free Software Foundation.
  *
- *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
  */
 
-#include <lantiq_soc.h>
+#ifndef __FALCON_IRQ_H
+#define __FALCON_IRQ_H
 
-#include "../prom.h"
-#include "devices.h"
+#include <falcon_irq.h>
 
-void __init ltq_soc_setup(void)
-{
-	ltq_register_ase_asc();
-	ltq_register_gpio();
-	ltq_register_wdt();
-}
+#define NR_IRQS 328
+
+#include_next <irq.h>
+
+#endif

arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h

+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_FALCON_H__
+#define _LTQ_FALCON_H__
+
+#ifdef CONFIG_SOC_FALCON
+
+#include <linux/pinctrl/pinctrl.h>
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_FALCON		0x01B8
+
+/* SoC Types */
+#define SOC_TYPE_FALCON		0x01
+
+/*
+ * during early_printk no ioremap possible at this early stage
+ * lets use KSEG1 instead
+ */
+#define LTQ_ASC0_BASE_ADDR	0x1E100C00
+#define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
+
+/* WDT */
+#define LTQ_RST_CAUSE_WDTRST	0x0002
+
+/* CHIP ID */
+#define LTQ_STATUS_BASE_ADDR	0x1E802000
+
+#define FALCON_CHIPID		((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c))
+#define FALCON_CHIPTYPE		((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38))
+#define FALCON_CHIPCONF		((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40))
+
+/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */
+#define SYSCTL_SYS1		0
+#define SYSCTL_SYSETH		1
+#define SYSCTL_SYSGPE		2
+
+/* BOOT_SEL - find what boot media we have */
+#define BS_FLASH		0x1
+#define BS_SPI                  0x4
+
+/* global register ranges */
+extern __iomem void *ltq_ebu_membase;
+extern __iomem void *ltq_sys1_membase;
+#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
+
+#define ltq_sys1_w32(x, y)	ltq_w32((x), ltq_sys1_membase + (y))
+#define ltq_sys1_r32(x)		ltq_r32(ltq_sys1_membase + (x))
+#define ltq_sys1_w32_mask(clear, set, reg)   \
+	ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
+
+/*
+ * to keep the irq code generic we need to define this to 0 as falcon
+ * has no EIU/EBU
+ */
+#define LTQ_EBU_PCC_ISTAT	0
+
+#endif /* CONFIG_SOC_FALCON */
+#endif /* _LTQ_XWAY_H__ */

arch/mips/include/asm/mach-lantiq/gpio.h

+#ifndef __ASM_MIPS_MACH_LANTIQ_GPIO_H
+#define __ASM_MIPS_MACH_LANTIQ_GPIO_H
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -1;
+}
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_cansleep __gpio_cansleep
+
+#include <asm-generic/gpio.h>
+
+#endif

arch/mips/include/asm/mach-lantiq/lantiq.h

@@ -9,6 +9,8 @@
 #define _LANTIQ_H__
 
 #include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
 
 /* generic reg access functions */
 #define ltq_r32(reg)		__raw_readl(reg)
@@ -21,25 +23,9 @@
 /* register access macros for EBU and CGU */
 #define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
 #define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
-#define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
-#define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
-
+#define ltq_ebu_w32_mask(x, y, z) \
+	ltq_w32_mask(x, y, ltq_ebu_membase + (z))
 extern __iomem void *ltq_ebu_membase;
-extern __iomem void *ltq_cgu_membase;
-
-extern unsigned int ltq_get_cpu_ver(void);
-extern unsigned int ltq_get_soc_type(void);
-
-/* clock speeds */
-#define CLOCK_60M	60000000
-#define CLOCK_83M	83333333
-#define CLOCK_111M	111111111
-#define CLOCK_133M	133333333
-#define CLOCK_167M	166666667
-#define CLOCK_200M	200000000
-#define CLOCK_266M	266666666
-#define CLOCK_333M	333333333
-#define CLOCK_400M	400000000
 
 /* spinlock all ebu i/o */
 extern spinlock_t ebu_lock;
@@ -49,15 +35,21 @@ extern void ltq_disable_irq(struct irq_data *data);
 extern void ltq_mask_and_ack_irq(struct irq_data *data);
 extern void ltq_enable_irq(struct irq_data *data);
 
+/* clock handling */
+extern int clk_activate(struct clk *clk);
+extern void clk_deactivate(struct clk *clk);
+extern struct clk *clk_get_cpu(void);
+extern struct clk *clk_get_fpi(void);
+extern struct clk *clk_get_io(void);
+
+/* find out what bootsource we have */
+extern unsigned char ltq_boot_select(void);
 /* find out what caused the last cpu reset */
 extern int ltq_reset_cause(void);
-#define LTQ_RST_CAUSE_WDTRST	0x20
 
 #define IOPORT_RESOURCE_START	0x10000000
 #define IOPORT_RESOURCE_END	0xffffffff
 #define IOMEM_RESOURCE_START	0x10000000
 #define IOMEM_RESOURCE_END	0xffffffff
-#define LTQ_FLASH_START		0x10000000
-#define LTQ_FLASH_MAX		0x04000000
 
 #endif

arch/mips/include/asm/mach-lantiq/lantiq_platform.h

@@ -9,41 +9,8 @@
 #ifndef _LANTIQ_PLATFORM_H__
 #define _LANTIQ_PLATFORM_H__
 
-#include <linux/mtd/partitions.h>
 #include <linux/socket.h>
 
-/* struct used to pass info to the pci core */
-enum {
-	PCI_CLOCK_INT = 0,
-	PCI_CLOCK_EXT
-};
-
-#define PCI_EXIN0	0x0001
-#define PCI_EXIN1	0x0002
-#define PCI_EXIN2	0x0004
-#define PCI_EXIN3	0x0008
-#define PCI_EXIN4	0x0010
-#define PCI_EXIN5	0x0020
-#define PCI_EXIN_MAX	6
-
-#define PCI_GNT1	0x0040
-#define PCI_GNT2	0x0080
-#define PCI_GNT3	0x0100
-#define PCI_GNT4	0x0200
-
-#define PCI_REQ1	0x0400
-#define PCI_REQ2	0x0800
-#define PCI_REQ3	0x1000
-#define PCI_REQ4	0x2000
-#define PCI_REQ_SHIFT	10
-#define PCI_REQ_MASK	0xf
-
-struct ltq_pci_data {
-	int clock;
-	int gpio;
-	int irq[16];
-};
-
 /* struct used to pass info to network drivers */
 struct ltq_eth_data {
 	struct sockaddr mac;

arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h

@@ -17,50 +17,8 @@
 #define INT_NUM_IM4_IRL0	(INT_NUM_IRQ0 + 128)
 #define INT_NUM_IM_OFFSET	(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
 
-#define LTQ_ASC_TIR(x)		(INT_NUM_IM3_IRL0 + (x * 8))
-#define LTQ_ASC_RIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 1)
-#define LTQ_ASC_EIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 2)
-
-#define LTQ_ASC_ASE_TIR		INT_NUM_IM2_IRL0
-#define LTQ_ASC_ASE_RIR		(INT_NUM_IM2_IRL0 + 2)
-#define LTQ_ASC_ASE_EIR		(INT_NUM_IM2_IRL0 + 3)
-
-#define LTQ_SSC_TIR		(INT_NUM_IM0_IRL0 + 15)
-#define LTQ_SSC_RIR		(INT_NUM_IM0_IRL0 + 14)
-#define LTQ_SSC_EIR		(INT_NUM_IM0_IRL0 + 16)
-
-#define LTQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
-#define LTQ_MEI_INT		(INT_NUM_IM1_IRL0 + 23)
-
-#define LTQ_TIMER6_INT		(INT_NUM_IM1_IRL0 + 23)
-#define LTQ_USB_INT		(INT_NUM_IM1_IRL0 + 22)
-#define LTQ_USB_OC_INT		(INT_NUM_IM4_IRL0 + 23)
-
-#define MIPS_CPU_TIMER_IRQ		7
-
 #define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
-#define LTQ_DMA_CH1_INT		(INT_NUM_IM2_IRL0 + 1)
-#define LTQ_DMA_CH2_INT		(INT_NUM_IM2_IRL0 + 2)
-#define LTQ_DMA_CH3_INT		(INT_NUM_IM2_IRL0 + 3)
-#define LTQ_DMA_CH4_INT		(INT_NUM_IM2_IRL0 + 4)
-#define LTQ_DMA_CH5_INT		(INT_NUM_IM2_IRL0 + 5)
-#define LTQ_DMA_CH6_INT		(INT_NUM_IM2_IRL0 + 6)
-#define LTQ_DMA_CH7_INT		(INT_NUM_IM2_IRL0 + 7)
-#define LTQ_DMA_CH8_INT		(INT_NUM_IM2_IRL0 + 8)
-#define LTQ_DMA_CH9_INT		(INT_NUM_IM2_IRL0 + 9)
-#define LTQ_DMA_CH10_INT	(INT_NUM_IM2_IRL0 + 10)
-#define LTQ_DMA_CH11_INT	(INT_NUM_IM2_IRL0 + 11)
-#define LTQ_DMA_CH12_INT	(INT_NUM_IM2_IRL0 + 25)
-#define LTQ_DMA_CH13_INT	(INT_NUM_IM2_IRL0 + 26)
-#define LTQ_DMA_CH14_INT	(INT_NUM_IM2_IRL0 + 27)
-#define LTQ_DMA_CH15_INT	(INT_NUM_IM2_IRL0 + 28)
-#define LTQ_DMA_CH16_INT	(INT_NUM_IM2_IRL0 + 29)
-#define LTQ_DMA_CH17_INT	(INT_NUM_IM2_IRL0 + 30)
-#define LTQ_DMA_CH18_INT	(INT_NUM_IM2_IRL0 + 16)
-#define LTQ_DMA_CH19_INT	(INT_NUM_IM2_IRL0 + 21)
-
-#define LTQ_PPE_MBOX_INT	(INT_NUM_IM2_IRL0 + 24)
 
-#define INT_NUM_IM4_IRL14	(INT_NUM_IM4_IRL0 + 14)
+#define MIPS_CPU_TIMER_IRQ	7
 
 #endif

arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h

@@ -17,38 +17,56 @@
 #define SOC_ID_DANUBE1		0x129
 #define SOC_ID_DANUBE2		0x12B
 #define SOC_ID_TWINPASS		0x12D
-#define SOC_ID_AMAZON_SE	0x152
+#define SOC_ID_AMAZON_SE_1	0x152 /* 50601 */
+#define SOC_ID_AMAZON_SE_2	0x153 /* 50600 */
 #define SOC_ID_ARX188		0x16C
-#define SOC_ID_ARX168		0x16D
+#define SOC_ID_ARX168_1		0x16D
+#define SOC_ID_ARX168_2		0x16E
 #define SOC_ID_ARX182		0x16F
-
-/* SoC Types */
+#define SOC_ID_GRX188		0x170
+#define SOC_ID_GRX168		0x171
+
+#define SOC_ID_VRX288		0x1C0 /* v1.1 */
+#define SOC_ID_VRX282		0x1C1 /* v1.1 */
+#define SOC_ID_VRX268		0x1C2 /* v1.1 */
+#define SOC_ID_GRX268		0x1C8 /* v1.1 */
+#define SOC_ID_GRX288		0x1C9 /* v1.1 */
+#define SOC_ID_VRX288_2		0x00B /* v1.2 */
+#define SOC_ID_VRX268_2		0x00C /* v1.2 */
+#define SOC_ID_GRX288_2		0x00D /* v1.2 */
+#define SOC_ID_GRX282_2		0x00E /* v1.2 */
+
+ /* SoC Types */
 #define SOC_TYPE_DANUBE		0x01
 #define SOC_TYPE_TWINPASS	0x02
 #define SOC_TYPE_AR9		0x03
-#define SOC_TYPE_VR9		0x04
-#define SOC_TYPE_AMAZON_SE	0x05
+#define SOC_TYPE_VR9		0x04 /* v1.1 */
+#define SOC_TYPE_VR9_2		0x05 /* v1.2 */
+#define SOC_TYPE_AMAZON_SE	0x06
+
+/* BOOT_SEL - find what boot media we have */
+#define BS_EXT_ROM		0x0
+#define BS_FLASH		0x1
+#define BS_MII0			0x2
+#define BS_PCI			0x3
+#define BS_UART1		0x4
+#define BS_SPI			0x5
+#define BS_NAND			0x6
+#define BS_RMII0		0x7
+
+/* helpers used to access the cgu */
+#define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
+#define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
+extern __iomem void *ltq_cgu_membase;
 
-/* ASC0/1 - serial port */
-#define LTQ_ASC0_BASE_ADDR	0x1E100400
+/*
+ * during early_printk no ioremap is possible
+ * lets use KSEG1 instead
+ */
 #define LTQ_ASC1_BASE_ADDR	0x1E100C00
-#define LTQ_ASC_SIZE		0x400
-
-/* RCU - reset control unit */
-#define LTQ_RCU_BASE_ADDR	0x1F203000
-#define LTQ_RCU_SIZE		0x1000
-
-/* GPTU - general purpose timer unit */
-#define LTQ_GPTU_BASE_ADDR	0x18000300
-#define LTQ_GPTU_SIZE		0x100
+#define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
 
 /* EBU - external bus unit */
-#define LTQ_EBU_GPIO_START	0x14000000
-#define LTQ_EBU_GPIO_SIZE	0x1000
-
-#define LTQ_EBU_BASE_ADDR	0x1E105300
-#define LTQ_EBU_SIZE		0x100
-
 #define LTQ_EBU_BUSCON0		0x0060
 #define LTQ_EBU_PCC_CON		0x0090
 #define LTQ_EBU_PCC_IEN		0x00A4
@@ -57,85 +75,17 @@
 #define LTQ_EBU_ADDRSEL1	0x0024
 #define EBU_WRDIS		0x80000000
 
-/* CGU - clock generation unit */
-#define LTQ_CGU_BASE_ADDR	0x1F103000
-#define LTQ_CGU_SIZE		0x1000
-
-/* ICU - interrupt control unit */
-#define LTQ_ICU_BASE_ADDR	0x1F880200
-#define LTQ_ICU_SIZE		0x100
-
-/* EIU - external interrupt unit */
-#define LTQ_EIU_BASE_ADDR	0x1F101000
-#define LTQ_EIU_SIZE		0x1000
-
-/* PMU - power management unit */
-#define LTQ_PMU_BASE_ADDR	0x1F102000
-#define LTQ_PMU_SIZE		0x1000
-
-#define PMU_DMA			0x0020
-#define PMU_USB			0x8041
-#define PMU_LED			0x0800
-#define PMU_GPT			0x1000
-#define PMU_PPE			0x2000
-#define PMU_FPI			0x4000
-#define PMU_SWITCH		0x10000000
-
-/* ETOP - ethernet */
-#define LTQ_ETOP_BASE_ADDR	0x1E180000
-#define LTQ_ETOP_SIZE		0x40000
-
-/* DMA */
-#define LTQ_DMA_BASE_ADDR	0x1E104100
-#define LTQ_DMA_SIZE		0x800
-
-/* PCI */
-#define PCI_CR_BASE_ADDR	0x1E105400
-#define PCI_CR_SIZE		0x400
-
 /* WDT */
-#define LTQ_WDT_BASE_ADDR	0x1F8803F0
-#define LTQ_WDT_SIZE		0x10
-
-/* STP - serial to parallel conversion unit */
-#define LTQ_STP_BASE_ADDR	0x1E100BB0
-#define LTQ_STP_SIZE		0x40
-
-/* GPIO */
-#define LTQ_GPIO0_BASE_ADDR	0x1E100B10
-#define LTQ_GPIO1_BASE_ADDR	0x1E100B40
-#define LTQ_GPIO2_BASE_ADDR	0x1E100B70
-#define LTQ_GPIO_SIZE		0x30
-
-/* SSC */
-#define LTQ_SSC_BASE_ADDR	0x1e100800
-#define LTQ_SSC_SIZE		0x100
-
-/* MEI - dsl core */
-#define LTQ_MEI_BASE_ADDR	0x1E116000
-
-/* DEU - data encryption unit */
-#define LTQ_DEU_BASE_ADDR	0x1E103100
+#define LTQ_RST_CAUSE_WDTRST	0x20
 
 /* MPS - multi processor unit (voice) */
 #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
 #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
 
 /* request a non-gpio and set the PIO config */
-extern int  ltq_gpio_request(unsigned int pin, unsigned int alt0,
-	unsigned int alt1, unsigned int dir, const char *name);
+#define PMU_PPE			 BIT(13)
 extern void ltq_pmu_enable(unsigned int module);
 extern void ltq_pmu_disable(unsigned int module);
 
-static inline int ltq_is_ar9(void)
-{
-	return (ltq_get_soc_type() == SOC_TYPE_AR9);
-}
-
-static inline int ltq_is_vr9(void)
-{
-	return (ltq_get_soc_type() == SOC_TYPE_VR9);
-}
-
 #endif /* CONFIG_SOC_TYPE_XWAY */
 #endif /* _LTQ_XWAY_H__ */

arch/mips/include/asm/mips-boards/generic.h

@@ -93,8 +93,4 @@ extern void mips_pcibios_init(void);
 #define mips_pcibios_init() do { } while (0)
 #endif
 
-#ifdef CONFIG_KGDB
-extern void kgdb_config(void);
-#endif
-
 #endif  /* __ASM_MIPS_BOARDS_GENERIC_H */

arch/mips/include/asm/module.h

@@ -2,6 +2,7 @@
 #define _ASM_MODULE_H
 
 #include <linux/list.h>
+#include <linux/elf.h>
 #include <asm/uaccess.h>
 
 struct mod_arch_specific {

arch/mips/include/asm/pci.h

@@ -17,6 +17,7 @@
  */
 
 #include <linux/ioport.h>
+#include <linux/of.h>
 
 /*
  * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
@@ -26,6 +27,7 @@
 struct pci_controller {
 	struct pci_controller *next;
 	struct pci_bus *bus;
+	struct device_node *of_node;
 
 	struct pci_ops *pci_ops;
 	struct resource *mem_resource;
@@ -142,4 +144,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 extern char * (*pcibios_plat_setup)(char *str);
 
+/* this function parses memory ranges from a device node */
+extern void __devinit pci_load_of_ranges(struct pci_controller *hose,
+					 struct device_node *node);
+
 #endif /* _ASM_PCI_H */

arch/mips/include/asm/prom.h

@@ -12,6 +12,9 @@
 #define __ASM_PROM_H
 
 #ifdef CONFIG_OF
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/types.h>
 #include <asm/bootinfo.h>
 
 extern int early_init_dt_scan_memory_arch(unsigned long node,
@@ -21,6 +24,29 @@ extern int reserve_mem_mach(unsigned long addr, unsigned long size);
 extern void free_mem_mach(unsigned long addr, unsigned long size);
 
 extern void device_tree_init(void);
+
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	/*
+	 * The ioport address can be directly used by inX() / outX()
+	 */
+	BUG_ON(address > IO_SPACE_LIMIT);
+
+	return (unsigned long) address;
+}
+#define pci_address_to_pio pci_address_to_pio
+
+struct boot_param_header;
+
+extern void __dt_setup_arch(struct boot_param_header *bph);
+
+#define dt_setup_arch(sym)						\
+({									\
+	extern struct boot_param_header __dtb_##sym##_begin;		\
+									\
+	__dt_setup_arch(&__dtb_##sym##_begin);				\
+})
+
 #else /* CONFIG_OF */
 static inline void device_tree_init(void) { }
 #endif /* CONFIG_OF */

arch/mips/include/asm/setup.h

@@ -14,7 +14,8 @@ extern void *set_vi_handler(int n, vi_handler_t addr);
 
 extern void *set_except_vector(int n, void *addr);
 extern unsigned long ebase;
-extern void per_cpu_trap_init(void);
+extern void per_cpu_trap_init(bool);
+extern void cpu_cache_init(void);
 
 #endif /* __KERNEL__ */
 

arch/mips/include/asm/sparsemem.h

@@ -6,7 +6,11 @@
  * SECTION_SIZE_BITS		2^N: how big each section will be
  * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
  */
-#define SECTION_SIZE_BITS       28
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PAGE_SIZE_64KB)
+# define SECTION_SIZE_BITS	29
+#else
+# define SECTION_SIZE_BITS	28
+#endif
 #define MAX_PHYSMEM_BITS        35
 
 #endif /* CONFIG_SPARSEMEM */

arch/mips/include/asm/termios.h

@@ -60,7 +60,7 @@ struct termio {
 };
 
 #ifdef __KERNEL__
-#include <linux/module.h>
+#include <asm/uaccess.h>
 
 /*
  *	intr=^C		quit=^\		erase=del	kill=^U

arch/mips/include/asm/traps.h

@@ -25,6 +25,7 @@ extern void (*board_nmi_handler_setup)(void);
 extern void (*board_ejtag_handler_setup)(void);
 extern void (*board_bind_eic_interrupt)(int irq, int regset);
 extern void (*board_ebase_setup)(void);
+extern void (*board_cache_error_setup)(void);
 
 extern int register_nmi_notifier(struct notifier_block *nb);
 

arch/mips/include/asm/uasm.h

@@ -11,7 +11,7 @@
 #include <linux/types.h>
 
 #ifdef CONFIG_EXPORT_UASM
-#include <linux/module.h>
+#include <linux/export.h>
 #define __uasminit
 #define __uasminitdata
 #define UASM_EXPORT_SYMBOL(sym) EXPORT_SYMBOL(sym)

arch/mips/jz4740/Makefile

@@ -16,5 +16,3 @@ obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
 # PM support
 
 obj-$(CONFIG_PM) += pm.o
-
-ccflags-y := -Werror -Wall

arch/mips/kernel/cpu-probe.c

@@ -340,7 +340,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R2000";
 		c->isa_level = MIPS_CPU_ISA_I;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
-		             MIPS_CPU_NOFPUEX;
+			     MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
 			c->options |= MIPS_CPU_FPU;
 		c->tlbsize = 64;
@@ -361,7 +361,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		}
 		c->isa_level = MIPS_CPU_ISA_I;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
-		             MIPS_CPU_NOFPUEX;
+			     MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
 			c->options |= MIPS_CPU_FPU;
 		c->tlbsize = 64;
@@ -387,8 +387,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 
 		c->isa_level = MIPS_CPU_ISA_III;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_WATCH | MIPS_CPU_VCE |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_WATCH | MIPS_CPU_VCE |
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_VR41XX:
@@ -434,7 +434,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R4300";
 		c->isa_level = MIPS_CPU_ISA_III;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 32;
 		break;
 	case PRID_IMP_R4600:
@@ -446,7 +446,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 48;
 		break;
 	#if 0
- 	case PRID_IMP_R4650:
+	case PRID_IMP_R4650:
 		/*
 		 * This processor doesn't have an MMU, so it's not
 		 * "real easy" to run Linux on it. It is left purely
@@ -455,9 +455,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		 */
 		c->cputype = CPU_R4650;
 		__cpu_name[cpu] = "R4650";
-	 	c->isa_level = MIPS_CPU_ISA_III;
+		c->isa_level = MIPS_CPU_ISA_III;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
-	        c->tlbsize = 48;
+		c->tlbsize = 48;
 		break;
 	#endif
 	case PRID_IMP_TX39:
@@ -488,7 +488,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R4700";
 		c->isa_level = MIPS_CPU_ISA_III;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_TX49:
@@ -505,7 +505,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R5000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_R5432:
@@ -513,7 +513,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R5432";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_WATCH | MIPS_CPU_LLSC;
+			     MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_R5500:
@@ -521,7 +521,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R5500";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_WATCH | MIPS_CPU_LLSC;
+			     MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_NEVADA:
@@ -529,7 +529,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "Nevada";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
+			     MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_R6000:
@@ -537,7 +537,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R6000";
 		c->isa_level = MIPS_CPU_ISA_II;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 32;
 		break;
 	case PRID_IMP_R6000A:
@@ -545,7 +545,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R6000A";
 		c->isa_level = MIPS_CPU_ISA_II;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 32;
 		break;
 	case PRID_IMP_RM7000:
@@ -553,7 +553,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "RM7000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		/*
 		 * Undocumented RM7000:  Bit 29 in the info register of
 		 * the RM7000 v2.0 indicates if the TLB has 48 or 64
@@ -569,7 +569,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "RM9000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		/*
 		 * Bit 29 in the info register of the RM9000
 		 * indicates if the TLB has 48 or 64 entries.
@@ -584,8 +584,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "RM8000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 384;      /* has weird TLB: 3-way x 128 */
 		break;
 	case PRID_IMP_R10000:
@@ -593,9 +593,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R10000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
-		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_R12000:
@@ -603,9 +603,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R12000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
-		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_R14000:
@@ -613,9 +613,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "R14000";
 		c->isa_level = MIPS_CPU_ISA_IV;
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
-		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
-		             MIPS_CPU_LLSC;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_LOONGSON2:
@@ -739,7 +739,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 	if (config3 & MIPS_CONF3_VEIC)
 		c->options |= MIPS_CPU_VEIC;
 	if (config3 & MIPS_CONF3_MT)
-	        c->ases |= MIPS_ASE_MIPSMT;
+		c->ases |= MIPS_ASE_MIPSMT;
 	if (config3 & MIPS_CONF3_ULRI)
 		c->options |= MIPS_CPU_ULRI;
 
@@ -767,7 +767,7 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 
 	/* MIPS32 or MIPS64 compliant CPU.  */
 	c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
-	             MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+		     MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
 
 	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 

arch/mips/kernel/perf_event_mipsxx.c

@@ -1532,7 +1532,8 @@ init_hw_perf_events(void)
 		irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
 	} else {
 #endif
-		if (cp0_perfcount_irq >= 0)
+		if ((cp0_perfcount_irq >= 0) &&
+				(cp0_compare_irq != cp0_perfcount_irq))
 			irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
 		else
 			irq = -1;

arch/mips/kernel/proc.c

@@ -41,27 +41,27 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "processor\t\t: %ld\n", n);
 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
-	        cpu_data[n].options & MIPS_CPU_FPU ? "  FPU V%d.%d" : "");
+		      cpu_data[n].options & MIPS_CPU_FPU ? "  FPU V%d.%d" : "");
 	seq_printf(m, fmt, __cpu_name[n],
-	                           (version >> 4) & 0x0f, version & 0x0f,
-	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
+		      (version >> 4) & 0x0f, version & 0x0f,
+		      (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
 	seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
-	              cpu_data[n].udelay_val / (500000/HZ),
-	              (cpu_data[n].udelay_val / (5000/HZ)) % 100);
+		      cpu_data[n].udelay_val / (500000/HZ),
+		      (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
 	seq_printf(m, "microsecond timers\t: %s\n",
-	              cpu_has_counter ? "yes" : "no");
+		      cpu_has_counter ? "yes" : "no");
 	seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize);
 	seq_printf(m, "extra interrupt vector\t: %s\n",
-	              cpu_has_divec ? "yes" : "no");
+		      cpu_has_divec ? "yes" : "no");
 	seq_printf(m, "hardware watchpoint\t: %s",
-		   cpu_has_watch ? "yes, " : "no\n");
+		      cpu_has_watch ? "yes, " : "no\n");
 	if (cpu_has_watch) {
 		seq_printf(m, "count: %d, address/irw mask: [",
-			   cpu_data[n].watch_reg_count);
+		      cpu_data[n].watch_reg_count);
 		for (i = 0; i < cpu_data[n].watch_reg_count; i++)
 			seq_printf(m, "%s0x%04x", i ? ", " : "" ,
-				   cpu_data[n].watch_reg_masks[i]);
+				cpu_data[n].watch_reg_masks[i]);
 		seq_printf(m, "]\n");
 	}
 	seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
@@ -73,13 +73,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		      cpu_has_mipsmt ? " mt" : ""
 		);
 	seq_printf(m, "shadow register sets\t: %d\n",
-		       cpu_data[n].srsets);
+		      cpu_data[n].srsets);
 	seq_printf(m, "kscratch registers\t: %d\n",
-		   hweight8(cpu_data[n].kscratch_mask));
+		      hweight8(cpu_data[n].kscratch_mask));
 	seq_printf(m, "core\t\t\t: %d\n", cpu_data[n].core);
 
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
-	        cpu_has_vce ? "%u" : "not available");
+		      cpu_has_vce ? "%u" : "not available");
 	seq_printf(m, fmt, 'D', vced_count);
 	seq_printf(m, fmt, 'I', vcei_count);
 	seq_printf(m, "\n");

arch/mips/kernel/prom.c

@@ -95,3 +95,16 @@ void __init device_tree_init(void)
 	/* free the space reserved for the dt blob */
 	free_mem_mach(base, size);
 }
+
+void __init __dt_setup_arch(struct boot_param_header *bph)
+{
+	if (be32_to_cpu(bph->magic) != OF_DT_HEADER) {
+		pr_err("DTB has bad magic, ignoring builtin OF DTB\n");
+
+		return;
+	}
+
+	initial_boot_params = bph;
+
+	early_init_devtree(initial_boot_params);
+}

arch/mips/kernel/setup.c

@@ -605,6 +605,8 @@ void __init setup_arch(char **cmdline_p)
 
 	resource_init();
 	plat_smp_setup();
+
+	cpu_cache_init();
 }
 
 unsigned long kernelsp[NR_CPUS];

arch/mips/kernel/smp.c

@@ -106,7 +106,7 @@ asmlinkage __cpuinit void start_secondary(void)
 #endif /* CONFIG_MIPS_MT_SMTC */
 	cpu_probe();
 	cpu_report();
-	per_cpu_trap_init();
+	per_cpu_trap_init(false);
 	mips_clockevent_init();
 	mp_ops->init_secondary();
 

arch/mips/kernel/traps.c

@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
@@ -91,7 +92,7 @@ void (*board_nmi_handler_setup)(void);
 void (*board_ejtag_handler_setup)(void);
 void (*board_bind_eic_interrupt)(int irq, int regset);
 void (*board_ebase_setup)(void);
-
+void __cpuinitdata(*board_cache_error_setup)(void);
 
 static void show_raw_backtrace(unsigned long reg29)
 {
@@ -1490,7 +1491,6 @@ void *set_vi_handler(int n, vi_handler_t addr)
 	return set_vi_srs_handler(n, addr, 0);
 }
 
-extern void cpu_cache_init(void);
 extern void tlb_init(void);
 extern void flush_tlb_handlers(void);
 
@@ -1517,7 +1517,7 @@ static int __init ulri_disable(char *s)
 }
 __setup("noulri", ulri_disable);
 
-void __cpuinit per_cpu_trap_init(void)
+void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int status_set = ST0_CU0;
@@ -1616,7 +1616,9 @@ void __cpuinit per_cpu_trap_init(void)
 #ifdef CONFIG_MIPS_MT_SMTC
 	if (bootTC) {
 #endif /* CONFIG_MIPS_MT_SMTC */
-		cpu_cache_init();
+		/* Boot CPU's cache setup in setup_arch(). */
+		if (!is_boot_cpu)
+			cpu_cache_init();
 		tlb_init();
 #ifdef CONFIG_MIPS_MT_SMTC
 	} else if (!secondaryTC) {
@@ -1632,7 +1634,7 @@ void __cpuinit per_cpu_trap_init(void)
 }
 
 /* Install CPU exception handler */
-void __init set_handler(unsigned long offset, void *addr, unsigned long size)
+void __cpuinit set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
 	local_flush_icache_range(ebase + offset, ebase + offset + size);
@@ -1693,7 +1695,7 @@ void __init trap_init(void)
 
 	if (board_ebase_setup)
 		board_ebase_setup();
-	per_cpu_trap_init();
+	per_cpu_trap_init(true);
 
 	/*
 	 * Copy the generic exception handlers to their final destination.
@@ -1797,6 +1799,9 @@ void __init trap_init(void)
 
 	set_except_vector(26, handle_dsp);
 
+	if (board_cache_error_setup)
+		board_cache_error_setup();
+
 	if (cpu_has_vce)
 		/* Special exception: R4[04]00 uses also the divec space. */
 		memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100);

arch/mips/lantiq/Kconfig

@@ -16,8 +16,22 @@ config SOC_XWAY
 	bool "XWAY"
 	select SOC_TYPE_XWAY
 	select HW_HAS_PCI
+
+config SOC_FALCON
+	bool "FALCON"
+
+endchoice
+
+choice
+	prompt "Devicetree"
+
+config DT_EASY50712
+	bool "Easy50712"
+	depends on SOC_XWAY
 endchoice
 
-source "arch/mips/lantiq/xway/Kconfig"
+config PCI_LANTIQ
+	bool "PCI Support"
+	depends on SOC_XWAY && PCI
 
 endif

arch/mips/lantiq/Makefile

@@ -4,8 +4,11 @@
 # under the terms of the GNU General Public License version 2 as published
 # by the Free Software Foundation.
 
-obj-y := irq.o setup.o clk.o prom.o devices.o
+obj-y := irq.o clk.o prom.o
+
+obj-y += dts/
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
 obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
+obj-$(CONFIG_SOC_FALCON) += falcon/

arch/mips/lantiq/Platform

@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ)	+= lantiq/
 cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
 load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
 cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
+cflags-$(CONFIG_SOC_FALCON)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon

arch/mips/lantiq/clk.c

@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/list.h>
 
@@ -22,44 +23,32 @@
 #include <lantiq_soc.h>
 
 #include "clk.h"
+#include "prom.h"
 
-struct clk {
-	const char *name;
-	unsigned long rate;
-	unsigned long (*get_rate) (void);
-};
+/* lantiq socs have 3 static clocks */
+static struct clk cpu_clk_generic[3];
 
-static struct clk *cpu_clk;
-static int cpu_clk_cnt;
+void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
+{
+	cpu_clk_generic[0].rate = cpu;
+	cpu_clk_generic[1].rate = fpi;
+	cpu_clk_generic[2].rate = io;
+}
 
-/* lantiq socs have 3 static clocks */
-static struct clk cpu_clk_generic[] = {
-	{
-		.name = "cpu",
-		.get_rate = ltq_get_cpu_hz,
-	}, {
-		.name = "fpi",
-		.get_rate = ltq_get_fpi_hz,
-	}, {
-		.name = "io",
-		.get_rate = ltq_get_io_region_clock,
-	},
-};
-
-static struct resource ltq_cgu_resource = {
-	.name	= "cgu",
-	.start	= LTQ_CGU_BASE_ADDR,
-	.end	= LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-/* remapped clock register range */
-void __iomem *ltq_cgu_membase;
-
-void clk_init(void)
+struct clk *clk_get_cpu(void)
+{
+	return &cpu_clk_generic[0];
+}
+
+struct clk *clk_get_fpi(void)
+{
+	return &cpu_clk_generic[1];
+}
+EXPORT_SYMBOL_GPL(clk_get_fpi);
+
+struct clk *clk_get_io(void)
 {
-	cpu_clk = cpu_clk_generic;
-	cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
+	return &cpu_clk_generic[2];
 }
 
 static inline int clk_good(struct clk *clk)
@@ -82,38 +71,71 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-struct clk *clk_get(struct device *dev, const char *id)
+int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	int i;
-
-	for (i = 0; i < cpu_clk_cnt; i++)
-		if (!strcmp(id, cpu_clk[i].name))
-			return &cpu_clk[i];
-	BUG();
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	/* not used */
+	if (unlikely(!clk_good(clk)))
+		return 0;
+	if (clk->rates && *clk->rates) {
+		unsigned long *r = clk->rates;
+
+		while (*r && (*r != rate))
+			r++;
+		if (!*r) {
+			pr_err("clk %s.%s: trying to set invalid rate %ld\n",
+				clk->cl.dev_id, clk->cl.con_id, rate);
+			return -1;
+		}
+	}
+	clk->rate = rate;
+	return 0;
 }
-EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_set_rate);
 
 int clk_enable(struct clk *clk)
 {
-	/* not used */
-	return 0;
+	if (unlikely(!clk_good(clk)))
+		return -1;
+
+	if (clk->enable)
+		return clk->enable(clk);
+
+	return -1;
 }
 EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
-	/* not used */
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	if (clk->disable)
+		clk->disable(clk);
 }
 EXPORT_SYMBOL(clk_disable);
 
-static inline u32 ltq_get_counter_resolution(void)
+int clk_activate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return -1;
+
+	if (clk->activate)
+		return clk->activate(clk);
+
+	return -1;
+}
+EXPORT_SYMBOL(clk_activate);
+
+void clk_deactivate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	if (clk->deactivate)
+		clk->deactivate(clk);
+}
+EXPORT_SYMBOL(clk_deactivate);
+
+static inline u32 get_counter_resolution(void)
 {
 	u32 res;
 
@@ -133,21 +155,11 @@ void __init plat_time_init(void)
 {
 	struct clk *clk;
 
-	if (insert_resource(&iomem_resource, &ltq_cgu_resource) < 0)
-		panic("Failed to insert cgu memory");
+	ltq_soc_init();
 
-	if (request_mem_region(ltq_cgu_resource.start,
-			resource_size(&ltq_cgu_resource), "cgu") < 0)
-		panic("Failed to request cgu memory");
-
-	ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
-				resource_size(&ltq_cgu_resource));
-	if (!ltq_cgu_membase) {
-		pr_err("Failed to remap cgu memory\n");
-		unreachable();
-	}
-	clk = clk_get(0, "cpu");
-	mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+	clk = clk_get_cpu();
+	mips_hpt_frequency = clk_get_rate(clk) / get_counter_resolution();
 	write_c0_compare(read_c0_count());
+	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	clk_put(clk);
 }

arch/mips/lantiq/clk.h

@@ -9,10 +9,70 @@
 #ifndef _LTQ_CLK_H__
 #define _LTQ_CLK_H__
 
-extern void clk_init(void);
+#include <linux/clkdev.h>
 
-extern unsigned long ltq_get_cpu_hz(void);
-extern unsigned long ltq_get_fpi_hz(void);
-extern unsigned long ltq_get_io_region_clock(void);
+/* clock speeds */
+#define CLOCK_33M	33333333
+#define CLOCK_60M	60000000
+#define CLOCK_62_5M	62500000
+#define CLOCK_83M	83333333
+#define CLOCK_83_5M	83500000
+#define CLOCK_98_304M	98304000
+#define CLOCK_100M	100000000
+#define CLOCK_111M	111111111
+#define CLOCK_125M	125000000
+#define CLOCK_133M	133333333
+#define CLOCK_150M	150000000
+#define CLOCK_166M	166666666
+#define CLOCK_167M	166666667
+#define CLOCK_196_608M	196608000
+#define CLOCK_200M	200000000
+#define CLOCK_250M	250000000
+#define CLOCK_266M	266666666
+#define CLOCK_300M	300000000
+#define CLOCK_333M	333333333
+#define CLOCK_393M	393215332
+#define CLOCK_400M	400000000
+#define CLOCK_500M	500000000
+#define CLOCK_600M	600000000
+
+/* clock out speeds */
+#define CLOCK_32_768K	32768
+#define CLOCK_1_536M	1536000
+#define CLOCK_2_5M	2500000
+#define CLOCK_12M	12000000
+#define CLOCK_24M	24000000
+#define CLOCK_25M	25000000
+#define CLOCK_30M	30000000
+#define CLOCK_40M	40000000
+#define CLOCK_48M	48000000
+#define CLOCK_50M	50000000
+#define CLOCK_60M	60000000
+
+struct clk {
+	struct clk_lookup cl;
+	unsigned long rate;
+	unsigned long *rates;
+	unsigned int module;
+	unsigned int bits;
+	unsigned long (*get_rate) (void);
+	int (*enable) (struct clk *clk);
+	void (*disable) (struct clk *clk);
+	int (*activate) (struct clk *clk);
+	void (*deactivate) (struct clk *clk);
+	void (*reboot) (struct clk *clk);
+};
+
+extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
+				unsigned long io);
+
+extern unsigned long ltq_danube_cpu_hz(void);
+extern unsigned long ltq_danube_fpi_hz(void);
+
+extern unsigned long ltq_ar9_cpu_hz(void);
+extern unsigned long ltq_ar9_fpi_hz(void);
+
+extern unsigned long ltq_vr9_cpu_hz(void);
+extern unsigned long ltq_vr9_fpi_hz(void);
 
 #endif

arch/mips/lantiq/devices.c

-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/etherdevice.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-
-#include <lantiq_soc.h>
-
-#include "devices.h"
-
-/* nor flash */
-static struct resource ltq_nor_resource = {
-	.name	= "nor",
-	.start	= LTQ_FLASH_START,
-	.end	= LTQ_FLASH_START + LTQ_FLASH_MAX - 1,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct platform_device ltq_nor = {
-	.name		= "ltq_nor",
-	.resource	= &ltq_nor_resource,
-	.num_resources	= 1,
-};
-
-void __init ltq_register_nor(struct physmap_flash_data *data)
-{
-	ltq_nor.dev.platform_data = data;
-	platform_device_register(&ltq_nor);
-}
-
-/* watchdog */
-static struct resource ltq_wdt_resource = {
-	.name	= "watchdog",
-	.start  = LTQ_WDT_BASE_ADDR,
-	.end    = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1,
-	.flags  = IORESOURCE_MEM,
-};
-
-void __init ltq_register_wdt(void)
-{
-	platform_device_register_simple("ltq_wdt", 0, &ltq_wdt_resource, 1);
-}
-
-/* asc ports */
-static struct resource ltq_asc0_resources[] = {
-	{
-		.name	= "asc0",
-		.start  = LTQ_ASC0_BASE_ADDR,
-		.end    = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	IRQ_RES(tx, LTQ_ASC_TIR(0)),
-	IRQ_RES(rx, LTQ_ASC_RIR(0)),
-	IRQ_RES(err, LTQ_ASC_EIR(0)),
-};
-
-static struct resource ltq_asc1_resources[] = {
-	{
-		.name	= "asc1",
-		.start  = LTQ_ASC1_BASE_ADDR,
-		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	IRQ_RES(tx, LTQ_ASC_TIR(1)),
-	IRQ_RES(rx, LTQ_ASC_RIR(1)),
-	IRQ_RES(err, LTQ_ASC_EIR(1)),
-};
-
-void __init ltq_register_asc(int port)
-{
-	switch (port) {
-	case 0:
-		platform_device_register_simple("ltq_asc", 0,
-			ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources));
-		break;
-	case 1:
-		platform_device_register_simple("ltq_asc", 1,
-			ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources));
-		break;
-	default:
-		break;
-	}
-}
-
-#ifdef CONFIG_PCI
-/* pci */
-static struct platform_device ltq_pci = {
-	.name		= "ltq_pci",
-	.num_resources	= 0,
-};
-
-void __init ltq_register_pci(struct ltq_pci_data *data)
-{
-	ltq_pci.dev.platform_data = data;
-	platform_device_register(&ltq_pci);
-}
-#else
-void __init ltq_register_pci(struct ltq_pci_data *data)
-{
-	pr_err("kernel is compiled without PCI support\n");
-}
-#endif

arch/mips/lantiq/devices.h

-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LTQ_DEVICES_H__
-#define _LTQ_DEVICES_H__
-
-#include <lantiq_platform.h>
-#include <linux/mtd/physmap.h>
-
-#define IRQ_RES(resname, irq) \
-	{.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ}
-
-extern void ltq_register_nor(struct physmap_flash_data *data);
-extern void ltq_register_wdt(void);
-extern void ltq_register_asc(int port);
-extern void ltq_register_pci(struct ltq_pci_data *data);
-
-#endif

arch/mips/lantiq/dts/Makefile

+obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
+
+$(obj)/%.dtb: $(obj)/%.dts
+	$(call if_changed,dtc)

arch/mips/lantiq/dts/danube.dtsi

+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,danube";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24Kc";
+		};
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x120>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+		};
+
+		serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		pci0: pci@E105400 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xE105400 0x400>;	/* pci bridge */
+		};
+	};
+};

arch/mips/lantiq/dts/easy50712.dts

+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x400000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xway";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 78>;
+			phy-mode = "rmii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		stp0: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+
+		pci@E105400 {
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+                                0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+			>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;		/* GNT1 */
+		};
+
+	};
+};

arch/mips/lantiq/early_printk.c

@@ -6,17 +6,16 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/init.h>
 #include <linux/cpu.h>
-
-#include <lantiq.h>
 #include <lantiq_soc.h>
 
-/* no ioremap possible at this early stage, lets use KSEG1 instead  */
-#define LTQ_ASC_BASE	KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
 #define ASC_BUF		1024
-#define LTQ_ASC_FSTAT	((u32 *)(LTQ_ASC_BASE + 0x0048))
-#define LTQ_ASC_TBUF	((u32 *)(LTQ_ASC_BASE + 0x0020))
+#define LTQ_ASC_FSTAT	((u32 *)(LTQ_EARLY_ASC + 0x0048))
+#ifdef __BIG_ENDIAN
+#define LTQ_ASC_TBUF	((u32 *)(LTQ_EARLY_ASC + 0x0020 + 3))
+#else
+#define LTQ_ASC_TBUF	((u32 *)(LTQ_EARLY_ASC + 0x0020))
+#endif
 #define TXMASK		0x3F00
 #define TXOFFSET	8
 
@@ -27,7 +26,7 @@ void prom_putchar(char c)
 	local_irq_save(flags);
 	do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
 	if (c == '\n')
-		ltq_w32('\r', LTQ_ASC_TBUF);
-	ltq_w32(c, LTQ_ASC_TBUF);
+		ltq_w8('\r', LTQ_ASC_TBUF);
+	ltq_w8(c, LTQ_ASC_TBUF);
 	local_irq_restore(flags);
 }

arch/mips/lantiq/falcon/Makefile

+obj-y := prom.o reset.o sysctrl.o

arch/mips/lantiq/falcon/prom.c

+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_FALCON	"Falcon"
+#define SOC_FALCON_D	"Falcon-D"
+#define SOC_FALCON_V	"Falcon-V"
+#define SOC_FALCON_M	"Falcon-M"
+
+#define COMP_FALCON	"lantiq,falcon"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFF000
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+#define SREV_SHIFT	22
+#define SREV_MASK	0x03C00000
+#define TYPE_SHIFT	26
+#define TYPE_MASK	0x3C000000
+
+/* reset, nmi and ejtag exception vectors */
+#define BOOT_REG_BASE	(KSEG1 | 0x1F200000)
+#define BOOT_RVEC	(BOOT_REG_BASE | 0x00)
+#define BOOT_NVEC	(BOOT_REG_BASE | 0x04)
+#define BOOT_EVEC	(BOOT_REG_BASE | 0x08)
+
+void __init ltq_soc_nmi_setup(void)
+{
+	extern void (*nmi_handler)(void);
+
+	ltq_w32((unsigned long)&nmi_handler, (void *)BOOT_NVEC);
+}
+
+void __init ltq_soc_ejtag_setup(void)
+{
+	extern void (*ejtag_debug_handler)(void);
+
+	ltq_w32((unsigned long)&ejtag_debug_handler, (void *)BOOT_EVEC);
+}
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	u32 type;
+	i->partnum = (ltq_r32(FALCON_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(FALCON_CHIPID) & REV_MASK) >> REV_SHIFT;
+	i->srev = ((ltq_r32(FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT);
+	i->compatible = COMP_FALCON;
+	i->type = SOC_TYPE_FALCON;
+	sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'),
+		i->rev & 0x7, (i->srev & 0x3) + 1);
+
+	switch (i->partnum) {
+	case SOC_ID_FALCON:
+		type = (ltq_r32(FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT;
+		switch (type) {
+		case 0:
+			i->name = SOC_FALCON_D;
+			break;
+		case 1:
+			i->name = SOC_FALCON_V;
+			break;
+		case 2:
+			i->name = SOC_FALCON_M;
+			break;
+		default:
+			i->name = SOC_FALCON;
+			break;
+		}
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}

arch/mips/lantiq/falcon/reset.c

+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+#include <linux/export.h>
+
+#include <lantiq_soc.h>
+
+/* CPU0 Reset Source Register */
+#define SYS1_CPU0RS		0x0040
+/* reset cause mask */
+#define CPU0RS_MASK		0x0003
+/* CPU0 Boot Mode Register */
+#define SYS1_BM			0x00a0
+/* boot mode mask */
+#define BM_MASK			0x0005
+
+/* allow platform code to find out what surce we booted from */
+unsigned char ltq_boot_select(void)
+{
+	return ltq_sys1_r32(SYS1_BM) & BM_MASK;
+}
+
+/* allow the watchdog driver to find out what the boot reason was */
+int ltq_reset_cause(void)
+{
+	return ltq_sys1_r32(SYS1_CPU0RS) & CPU0RS_MASK;
+}
+EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
+#define BOOT_REG_BASE	(KSEG1 | 0x1F200000)
+#define BOOT_PW1_REG	(BOOT_REG_BASE | 0x20)
+#define BOOT_PW2_REG	(BOOT_REG_BASE | 0x24)
+#define BOOT_PW1	0x4C545100
+#define BOOT_PW2	0x0051544C
+
+#define WDT_REG_BASE	(KSEG1 | 0x1F8803F0)
+#define WDT_PW1		0x00BE0000
+#define WDT_PW2		0x00DC0000
+
+static void machine_restart(char *command)
+{
+	local_irq_disable();
+
+	/* reboot magic */
+	ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */
+	ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */
+	ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */
+
+	/* watchdog magic */
+	ltq_w32(WDT_PW1, (void *)WDT_REG_BASE);
+	ltq_w32(WDT_PW2 |
+		(0x3 << 26) | /* PWL */
+		(0x2 << 24) | /* CLKDIV */
+		(0x1 << 31) | /* enable */
+		(1), /* reload */
+		(void *)WDT_REG_BASE);
+	unreachable();
+}
+
+static void machine_halt(void)
+{
+	local_irq_disable();
+	unreachable();
+}
+
+static void machine_power_off(void)
+{
+	local_irq_disable();
+	unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = machine_restart;
+	_machine_halt = machine_halt;
+	pm_power_off = machine_power_off;
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);

arch/mips/lantiq/falcon/sysctrl.c

+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <asm/delay.h>
+
+#include <lantiq_soc.h>
+
+#include "../clk.h"
+
+/* infrastructure control register */
+#define SYS1_INFRAC		0x00bc
+/* Configuration fuses for drivers and pll */
+#define STATUS_CONFIG		0x0040
+
+/* GPE frequency selection */
+#define GPPC_OFFSET		24
+#define GPEFREQ_MASK		0x00000C0
+#define GPEFREQ_OFFSET		10
+/* Clock status register */
+#define SYSCTL_CLKS		0x0000
+/* Clock enable register */
+#define SYSCTL_CLKEN		0x0004
+/* Clock clear register */
+#define SYSCTL_CLKCLR		0x0008
+/* Activation Status Register */
+#define SYSCTL_ACTS		0x0020
+/* Activation Register */
+#define SYSCTL_ACT		0x0024
+/* Deactivation Register */
+#define SYSCTL_DEACT		0x0028
+/* reboot Register */
+#define SYSCTL_RBT		0x002c
+/* CPU0 Clock Control Register */
+#define SYS1_CPU0CC		0x0040
+/* HRST_OUT_N Control Register */
+#define SYS1_HRSTOUTC		0x00c0
+/* clock divider bit */
+#define CPU0CC_CPUDIV		0x0001
+
+/* Activation Status Register */
+#define ACTS_ASC1_ACT	0x00000800
+#define ACTS_I2C_ACT	0x00004000
+#define ACTS_P0		0x00010000
+#define ACTS_P1		0x00010000
+#define ACTS_P2		0x00020000
+#define ACTS_P3		0x00020000
+#define ACTS_P4		0x00040000
+#define ACTS_PADCTRL0	0x00100000
+#define ACTS_PADCTRL1	0x00100000
+#define ACTS_PADCTRL2	0x00200000
+#define ACTS_PADCTRL3	0x00200000
+#define ACTS_PADCTRL4	0x00400000
+
+#define sysctl_w32(m, x, y)	ltq_w32((x), sysctl_membase[m] + (y))
+#define sysctl_r32(m, x)	ltq_r32(sysctl_membase[m] + (x))
+#define sysctl_w32_mask(m, clear, set, reg)	\
+		sysctl_w32(m, (sysctl_r32(m, reg) & ~(clear)) | (set), reg)
+
+#define status_w32(x, y)	ltq_w32((x), status_membase + (y))
+#define status_r32(x)		ltq_r32(status_membase + (x))
+
+static void __iomem *sysctl_membase[3], *status_membase;
+void __iomem *ltq_sys1_membase, *ltq_ebu_membase;
+
+void falcon_trigger_hrst(int level)
+{
+	sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC);
+}
+
+static inline void sysctl_wait(struct clk *clk,
+		unsigned int test, unsigned int reg)
+{
+	int err = 1000000;
+
+	do {} while (--err && ((sysctl_r32(clk->module, reg)
+					& clk->bits) != test));
+	if (!err)
+		pr_err("module de/activation failed %d %08X %08X %08X\n",
+			clk->module, clk->bits, test,
+			sysctl_r32(clk->module, reg) & clk->bits);
+}
+
+static int sysctl_activate(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
+	sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
+	return 0;
+}
+
+static void sysctl_deactivate(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_DEACT);
+	sysctl_wait(clk, 0, SYSCTL_ACTS);
+}
+
+static int sysctl_clken(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
+	sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
+	return 0;
+}
+
+static void sysctl_clkdis(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
+	sysctl_wait(clk, 0, SYSCTL_CLKS);
+}
+
+static void sysctl_reboot(struct clk *clk)
+{
+	unsigned int act;
+	unsigned int bits;
+
+	act = sysctl_r32(clk->module, SYSCTL_ACT);
+	bits = ~act & clk->bits;
+	if (bits != 0) {
+		sysctl_w32(clk->module, bits, SYSCTL_CLKEN);
+		sysctl_w32(clk->module, bits, SYSCTL_ACT);
+		sysctl_wait(clk, bits, SYSCTL_ACTS);
+	}
+	sysctl_w32(clk->module, act & clk->bits, SYSCTL_RBT);
+	sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
+}
+
+/* enable the ONU core */
+static void falcon_gpe_enable(void)
+{
+	unsigned int freq;
+	unsigned int status;
+
+	/* if if the clock is already enabled */
+	status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC);
+	if (status & (1 << (GPPC_OFFSET + 1)))
+		return;
+
+	if (status_r32(STATUS_CONFIG) == 0)
+		freq = 1; /* use 625MHz on unfused chip */
+	else
+		freq = (status_r32(STATUS_CONFIG) &
+			GPEFREQ_MASK) >>
+			GPEFREQ_OFFSET;
+
+	/* apply new frequency */
+	sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
+		freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
+	udelay(1);
+
+	/* enable new frequency */
+	sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
+	udelay(1);
+}
+
+static inline void clkdev_add_sys(const char *dev, unsigned int module,
+					unsigned int bits)
+{
+	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	clk->cl.dev_id = dev;
+	clk->cl.con_id = NULL;
+	clk->cl.clk = clk;
+	clk->module = module;
+	clk->activate = sysctl_activate;
+	clk->deactivate = sysctl_deactivate;
+	clk->enable = sysctl_clken;
+	clk->disable = sysctl_clkdis;
+	clk->reboot = sysctl_reboot;
+	clkdev_add(&clk->cl);
+}
+
+void __init ltq_soc_init(void)
+{
+	struct device_node *np_status =
+		of_find_compatible_node(NULL, NULL, "lantiq,status-falcon");
+	struct device_node *np_ebu =
+		of_find_compatible_node(NULL, NULL, "lantiq,ebu-falcon");
+	struct device_node *np_sys1 =
+		of_find_compatible_node(NULL, NULL, "lantiq,sys1-falcon");
+	struct device_node *np_syseth =
+		of_find_compatible_node(NULL, NULL, "lantiq,syseth-falcon");
+	struct device_node *np_sysgpe =
+		of_find_compatible_node(NULL, NULL, "lantiq,sysgpe-falcon");
+	struct resource res_status, res_ebu, res_sys[3];
+	int i;
+
+	/* check if all the core register ranges are available */
+	if (!np_status || !np_ebu || !np_sys1 || !np_syseth || !np_sysgpe)
+		panic("Failed to load core nodes from devicetree");
+
+	if (of_address_to_resource(np_status, 0, &res_status) ||
+			of_address_to_resource(np_ebu, 0, &res_ebu) ||
+			of_address_to_resource(np_sys1, 0, &res_sys[0]) ||
+			of_address_to_resource(np_syseth, 0, &res_sys[1]) ||
+			of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
+		panic("Failed to get core resources");
+
+	if ((request_mem_region(res_status.start, resource_size(&res_status),
+				res_status.name) < 0) ||
+		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
+				res_ebu.name) < 0) ||
+		(request_mem_region(res_sys[0].start,
+				resource_size(&res_sys[0]),
+				res_sys[0].name) < 0) ||
+		(request_mem_region(res_sys[1].start,
+				resource_size(&res_sys[1]),
+				res_sys[1].name) < 0) ||
+		(request_mem_region(res_sys[2].start,
+				resource_size(&res_sys[2]),
+				res_sys[2].name) < 0))
+		pr_err("Failed to request core reources");
+
+	status_membase = ioremap_nocache(res_status.start,
+					resource_size(&res_status));
+	ltq_ebu_membase = ioremap_nocache(res_ebu.start,
+					resource_size(&res_ebu));
+
+	if (!status_membase || !ltq_ebu_membase)
+		panic("Failed to remap core resources");
+
+	for (i = 0; i < 3; i++) {
+		sysctl_membase[i] = ioremap_nocache(res_sys[i].start,
+						resource_size(&res_sys[i]));
+		if (!sysctl_membase[i])
+			panic("Failed to remap sysctrl resources");
+	}
+	ltq_sys1_membase = sysctl_membase[0];
+
+	falcon_gpe_enable();
+
+	/* get our 3 static rates for cpu, fpi and io clocks */
+	if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
+		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
+	else
+		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
+
+	/* add our clock domains */
+	clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
+	clkdev_add_sys("1d810100.gpio", SYSCTL_SYSETH, ACTS_P2);
+	clkdev_add_sys("1e800100.gpio", SYSCTL_SYS1, ACTS_P1);
+	clkdev_add_sys("1e800200.gpio", SYSCTL_SYS1, ACTS_P3);
+	clkdev_add_sys("1e800300.gpio", SYSCTL_SYS1, ACTS_P4);
+	clkdev_add_sys("1db01000.pad", SYSCTL_SYSETH, ACTS_PADCTRL0);
+	clkdev_add_sys("1db02000.pad", SYSCTL_SYSETH, ACTS_PADCTRL2);
+	clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
+	clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
+	clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
+	clkdev_add_sys("1e100C00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
+	clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
+}

arch/mips/lantiq/machtypes.h

-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LANTIQ_MACH_H__
-#define _LANTIQ_MACH_H__
-
-#include <asm/mips_machine.h>
-
-enum lantiq_mach_type {
-	LTQ_MACH_GENERIC = 0,
-	LTQ_MACH_EASY50712,	/* Danube evaluation board */
-	LTQ_MACH_EASY50601,	/* Amazon SE evaluation board */
-};
-
-#endif

arch/mips/lantiq/prom.h

@@ -10,16 +10,22 @@
 #define _LTQ_PROM_H__
 
 #define LTQ_SYS_TYPE_LEN	0x100
+#define LTQ_SYS_REV_LEN         0x10
 
 struct ltq_soc_info {
 	unsigned char *name;
 	unsigned int rev;
+	unsigned char rev_type[LTQ_SYS_REV_LEN];
+	unsigned int srev;
 	unsigned int partnum;
 	unsigned int type;
 	unsigned char sys_type[LTQ_SYS_TYPE_LEN];
+	unsigned char *compatible;
 };
 
 extern void ltq_soc_detect(struct ltq_soc_info *i);
-extern void ltq_soc_setup(void);
+extern void ltq_soc_init(void);
+
+extern struct boot_param_header __dtb_start;
 
 #endif

arch/mips/lantiq/setup.c

-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-
-#include <lantiq_soc.h>
-
-#include "machtypes.h"
-#include "devices.h"
-#include "prom.h"
-
-void __init plat_mem_setup(void)
-{
-	/* assume 16M as default incase uboot fails to pass proper ramsize */
-	unsigned long memsize = 16;
-	char **envp = (char **) KSEG1ADDR(fw_arg2);
-
-	ioport_resource.start = IOPORT_RESOURCE_START;
-	ioport_resource.end = IOPORT_RESOURCE_END;
-	iomem_resource.start = IOMEM_RESOURCE_START;
-	iomem_resource.end = IOMEM_RESOURCE_END;
-
-	set_io_port_base((unsigned long) KSEG1);
-
-	while (*envp) {
-		char *e = (char *)KSEG1ADDR(*envp);
-		if (!strncmp(e, "memsize=", 8)) {
-			e += 8;
-			if (strict_strtoul(e, 0, &memsize))
-				pr_warn("bad memsize specified\n");
-		}
-		envp++;
-	}
-	memsize *= 1024 * 1024;
-	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-}
-
-static int __init
-lantiq_setup(void)
-{
-	ltq_soc_setup();
-	mips_machine_setup();
-	return 0;
-}
-
-arch_initcall(lantiq_setup);
-
-static void __init
-lantiq_generic_init(void)
-{
-	/* Nothing to do */
-}
-
-MIPS_MACHINE(LTQ_MACH_GENERIC,
-	     "Generic",
-	     "Generic Lantiq based board",
-	     lantiq_generic_init);

arch/mips/lantiq/xway/Makefile

-obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
-
-obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
-obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
-
-obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
-obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o