Commit 7e6213f4 authored by Paul Kocialkowski's avatar Paul Kocialkowski Committed by Mark Brown

regulator: lp872x: Add enable GPIO pin support

LP872x regulators are made active via the EN pin, which might be hooked to a
GPIO. This adds support for driving the GPIO high when the driver is in use.
Signed-off-by: default avatarPaul Kocialkowski <contact@paulk.fr>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 690f44ba
......@@ -28,6 +28,7 @@ Optional properties:
- ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
- ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
- ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
- enable-gpios: GPIO specifier for EN pin control of LP872x devices.
Sub nodes for regulator_init_data
LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
......
......@@ -15,6 +15,7 @@
#include <linux/regmap.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/regulator/lp872x.h>
#include <linux/regulator/driver.h>
#include <linux/platform_device.h>
......@@ -757,6 +758,33 @@ static int lp872x_init_dvs(struct lp872x *lp)
default_dvs_mode[lp->chipid]);
}
static int lp872x_hw_enable(struct lp872x *lp)
{
int ret, gpio;
if (!lp->pdata)
return -EINVAL;
gpio = lp->pdata->enable_gpio;
if (!gpio_is_valid(gpio))
return 0;
/* Always set enable GPIO high. */
ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN");
if (ret) {
dev_err(lp->dev, "gpio request err: %d\n", ret);
return ret;
}
/* Each chip has a different enable delay. */
if (lp->chipid == LP8720)
usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY);
else
usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY);
return 0;
}
static int lp872x_config(struct lp872x *lp)
{
struct lp872x_platform_data *pdata = lp->pdata;
......@@ -875,6 +903,8 @@ static struct lp872x_platform_data
of_property_read_u8(np, "ti,dvs-state", &dvs_state);
pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW;
pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0);
if (of_get_child_count(np) == 0)
goto out;
......@@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
lp->chipid = id->driver_data;
i2c_set_clientdata(cl, lp);
ret = lp872x_hw_enable(lp);
if (ret)
return ret;
ret = lp872x_config(lp);
if (ret)
return ret;
......
......@@ -18,6 +18,9 @@
#define LP872X_MAX_REGULATORS 9
#define LP8720_ENABLE_DELAY 200
#define LP8725_ENABLE_DELAY 30000
enum lp872x_regulator_id {
LP8720_ID_BASE,
LP8720_ID_LDO1 = LP8720_ID_BASE,
......@@ -79,12 +82,14 @@ struct lp872x_regulator_data {
* @update_config : if LP872X_GENERAL_CFG register is updated, set true
* @regulator_data : platform regulator id and init data
* @dvs : dvs data for buck voltage control
* @enable_gpio : gpio pin number for enable control
*/
struct lp872x_platform_data {
u8 general_config;
bool update_config;
struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS];
struct lp872x_dvs *dvs;
int enable_gpio;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment