[SCSI] megaraid_sas: Check MFI_REG_STATE.fault.resetAdapter

The following patch for megaraid_sas fixes the function
megasas_reset_fusion() and makes the reset code check
MFI_REG_STATE.fault.resetAdapter.
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>

drivers/scsi/megaraid/megaraid_sas.h

@@ -76,8 +76,8 @@
 #define MFI_STATE_READY				0xB0000000
 #define MFI_STATE_OPERATIONAL			0xC0000000
 #define MFI_STATE_FAULT				0xF0000000
-#define  MFI_RESET_REQUIRED			0x00000001
-
+#define MFI_RESET_REQUIRED			0x00000001
+#define MFI_RESET_ADAPTER			0x00000002
 #define MEGAMFI_FRAME_SIZE			64
 
 /*

drivers/scsi/megaraid/megaraid_sas_fusion.c

@@ -2010,17 +2010,11 @@ int megasas_reset_fusion(struct Scsi_Host *shost)
 	struct fusion_context *fusion;
 	struct megasas_cmd *cmd_mfi;
 	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
-	u32 host_diag, abs_state;
+	u32 host_diag, abs_state, status_reg, reset_adapter;
 
 	instance = (struct megasas_instance *)shost->hostdata;
 	fusion = instance->ctrl_context;
 
-	mutex_lock(&instance->reset_mutex);
-	set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
-	instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
-	instance->instancet->disable_intr(instance->reg_set);
-	msleep(1000);
-
 	if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
 		printk(KERN_WARNING "megaraid_sas: Hardware critical error, "
 		       "returning FAILED.\n");
@@ -2028,6 +2022,12 @@ int megasas_reset_fusion(struct Scsi_Host *shost)
 		goto out;
 	}
 
+	mutex_lock(&instance->reset_mutex);
+	set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+	instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
+	instance->instancet->disable_intr(instance->reg_set);
+	msleep(1000);
+
 	/* First try waiting for commands to complete */
 	if (megasas_wait_for_outstanding_fusion(instance)) {
 		printk(KERN_WARNING "megaraid_sas: resetting fusion "
@@ -2044,7 +2044,12 @@ int megasas_reset_fusion(struct Scsi_Host *shost)
 			}
 		}
 
-		if (instance->disableOnlineCtrlReset == 1) {
+		status_reg = instance->instancet->read_fw_status_reg(
+			instance->reg_set);
+		abs_state = status_reg & MFI_STATE_MASK;
+		reset_adapter = status_reg & MFI_RESET_ADAPTER;
+		if (instance->disableOnlineCtrlReset ||
+		    (abs_state == MFI_STATE_FAULT && !reset_adapter)) {
 			/* Reset not supported, kill adapter */
 			printk(KERN_WARNING "megaraid_sas: Reset not supported"
 			       ", killing adapter.\n");
@@ -2073,6 +2078,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost)
 
 			/* Check that the diag write enable (DRWE) bit is on */
 			host_diag = readl(&instance->reg_set->fusion_host_diag);
+			retry = 0;
 			while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
 				msleep(100);
 				host_diag =
@@ -2110,7 +2116,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost)
 
 			abs_state =
 				instance->instancet->read_fw_status_reg(
-					instance->reg_set);
+					instance->reg_set) & MFI_STATE_MASK;
 			retry = 0;
 
 			while ((abs_state <= MFI_STATE_FW_INIT) &&
@@ -2118,7 +2124,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost)
 				msleep(100);
 				abs_state =
 				instance->instancet->read_fw_status_reg(
-					instance->reg_set);
+					instance->reg_set) & MFI_STATE_MASK;
 			}
 			if (abs_state <= MFI_STATE_FW_INIT) {
 				printk(KERN_WARNING "megaraid_sas: firmware "