alx: fix ethtool support code

A number of places treated features wrongly, listing not-supported
features instead of supported ones. Also, the get_drvinfo ethtool
callback isn't needed, and alx_get_pauseparam can be simplified.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/atheros/alx/ethtool.c

@@ -46,21 +46,37 @@
 #include "reg.h"
 #include "hw.h"
 
+static u32 alx_get_supported_speeds(struct alx_hw *hw)
+{
+	u32 supported = SUPPORTED_10baseT_Half |
+			SUPPORTED_10baseT_Full |
+			SUPPORTED_100baseT_Half |
+			SUPPORTED_100baseT_Full;
+
+	if (alx_hw_giga(hw))
+		supported |= SUPPORTED_1000baseT_Full;
+
+	BUILD_BUG_ON(SUPPORTED_10baseT_Half != ADVERTISED_10baseT_Half);
+	BUILD_BUG_ON(SUPPORTED_10baseT_Full != ADVERTISED_10baseT_Full);
+	BUILD_BUG_ON(SUPPORTED_100baseT_Half != ADVERTISED_100baseT_Half);
+	BUILD_BUG_ON(SUPPORTED_100baseT_Full != ADVERTISED_100baseT_Full);
+	BUILD_BUG_ON(SUPPORTED_1000baseT_Full != ADVERTISED_1000baseT_Full);
+
+	return supported;
+}
 
 static int alx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
 	struct alx_priv *alx = netdev_priv(netdev);
 	struct alx_hw *hw = &alx->hw;
 
-	ecmd->supported = SUPPORTED_10baseT_Half |
-			  SUPPORTED_10baseT_Full |
-			  SUPPORTED_100baseT_Half |
-			  SUPPORTED_100baseT_Full |
-			  SUPPORTED_Autoneg |
+	ecmd->supported = SUPPORTED_Autoneg |
 			  SUPPORTED_TP |
-			  SUPPORTED_Pause;
+			  SUPPORTED_Pause |
+			  SUPPORTED_Asym_Pause;
 	if (alx_hw_giga(hw))
 		ecmd->supported |= SUPPORTED_1000baseT_Full;
+	ecmd->supported |= alx_get_supported_speeds(hw);
 
 	ecmd->advertising = ADVERTISED_TP;
 	if (hw->adv_cfg & ADVERTISED_Autoneg)
@@ -68,6 +84,7 @@ static int alx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 	ecmd->port = PORT_TP;
 	ecmd->phy_address = 0;
+
 	if (hw->adv_cfg & ADVERTISED_Autoneg)
 		ecmd->autoneg = AUTONEG_ENABLE;
 	else
@@ -100,7 +117,7 @@ static int alx_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	ASSERT_RTNL();
 
 	if (ecmd->autoneg == AUTONEG_ENABLE) {
-		if (ecmd->advertising & ADVERTISED_1000baseT_Half)
+		if (ecmd->advertising & ~alx_get_supported_speeds(hw))
 			return -EINVAL;
 		adv_cfg = ecmd->advertising | ADVERTISED_Autoneg;
 	} else {
@@ -121,21 +138,10 @@ static void alx_get_pauseparam(struct net_device *netdev,
 	struct alx_priv *alx = netdev_priv(netdev);
 	struct alx_hw *hw = &alx->hw;
 
-	if (hw->flowctrl & ALX_FC_ANEG &&
-	    hw->adv_cfg & ADVERTISED_Autoneg)
-		pause->autoneg = AUTONEG_ENABLE;
-	else
-		pause->autoneg = AUTONEG_DISABLE;
-
-	if (hw->flowctrl & ALX_FC_TX)
-		pause->tx_pause = 1;
-	else
-		pause->tx_pause = 0;
-
-	if (hw->flowctrl & ALX_FC_RX)
-		pause->rx_pause = 1;
-	else
-		pause->rx_pause = 0;
+	pause->autoneg = !!(hw->flowctrl & ALX_FC_ANEG &&
+			    hw->adv_cfg & ADVERTISED_Autoneg);
+	pause->tx_pause = !!(hw->flowctrl & ALX_FC_TX);
+	pause->rx_pause = !!(hw->flowctrl & ALX_FC_RX);
 }
 
 
@@ -214,8 +220,7 @@ static int alx_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct alx_priv *alx = netdev_priv(netdev);
 	struct alx_hw *hw = &alx->hw;
 
-	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
+	if (wol->wolopts & ~(WAKE_MAGIC | WAKE_PHY))
 		return -EOPNOTSUPP;
 
 	hw->sleep_ctrl = 0;
@@ -230,22 +235,11 @@ static int alx_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-static void alx_get_drvinfo(struct net_device *netdev,
-			    struct ethtool_drvinfo *drvinfo)
-{
-	struct alx_priv *alx = netdev_priv(netdev);
-
-	strlcpy(drvinfo->driver, alx_drv_name, sizeof(drvinfo->driver));
-	strlcpy(drvinfo->bus_info, pci_name(alx->hw.pdev),
-		sizeof(drvinfo->bus_info));
-}
-
 const struct ethtool_ops alx_ethtool_ops = {
 	.get_settings	= alx_get_settings,
 	.set_settings	= alx_set_settings,
 	.get_pauseparam	= alx_get_pauseparam,
 	.set_pauseparam	= alx_set_pauseparam,
-	.get_drvinfo	= alx_get_drvinfo,
 	.get_msglevel	= alx_get_msglevel,
 	.set_msglevel	= alx_set_msglevel,
 	.get_wol	= alx_get_wol,