Commit 7f102d7a authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Greg Kroah-Hartman

SolutionEngine771x: fix Ether platform data


[ Upstream commit 195e2add ]

The 'sh_eth' driver's probe() method would fail  on the SolutionEngine7710
board and crash on SolutionEngine7712 board  as the platform code is
hopelessly behind the driver's platform data --  it passes the PHY address
instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in
order to fix the bug...

Fixes: 71557a37 ("[netdrvr] sh_eth: Add SH7619 support")
Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <alexander.levin@microsoft.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f49e50f8
......@@ -8,6 +8,7 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sh_eth.h>
#include <mach-se/mach/se.h>
#include <mach-se/mach/mrshpc.h>
#include <asm/machvec.h>
......@@ -114,6 +115,11 @@ static struct platform_device heartbeat_device = {
#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
defined(CONFIG_CPU_SUBTYPE_SH7712)
/* SH771X Ethernet driver */
static struct sh_eth_plat_data sh_eth_plat = {
.phy = PHY_ID,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct resource sh_eth0_resources[] = {
[0] = {
.start = SH_ETH0_BASE,
......@@ -131,7 +137,7 @@ static struct platform_device sh_eth0_device = {
.name = "sh771x-ether",
.id = 0,
.dev = {
.platform_data = PHY_ID,
.platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth0_resources),
.resource = sh_eth0_resources,
......@@ -154,7 +160,7 @@ static struct platform_device sh_eth1_device = {
.name = "sh771x-ether",
.id = 1,
.dev = {
.platform_data = PHY_ID,
.platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth1_resources),
.resource = sh_eth1_resources,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment