Commit 7f36da14 authored by Sean Nyekjaer's avatar Sean Nyekjaer Committed by Jonathan Cameron

dt-bindings: iio: accel: fxls8962af: add bindings

Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF
accelerometer sensor.
Signed-off-by: default avatarSean Nyekjaer <sean@geanix.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent a3e0b518
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
maintainers:
- Sean Nyekjaer <sean@geanix.com>
description: |
NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
SPI and I2C interface.
https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
properties:
compatible:
enum:
- nxp,fxls8962af
- nxp,fxls8964af
reg:
maxItems: 1
vdd-supply:
description: phandle to the regulator that provides power to the accelerometer
spi-max-frequency: true
interrupts:
maxItems: 1
interrupt-names:
enum:
- INT1
- INT2
drive-open-drain:
type: boolean
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
/* Example for a I2C device node */
accelerometer@62 {
compatible = "nxp,fxls8962af";
reg = <0x62>;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "INT1";
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi0 {
#address-cells = <1>;
#size-cells = <0>;
/* Example for a SPI device node */
accelerometer@0 {
compatible = "nxp,fxls8962af";
reg = <0>;
spi-max-frequency = <4000000>;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "INT1";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment