Commit 7f41d52c authored by Claudiu Beznea's avatar Claudiu Beznea

ARM: dts: at91: sama7g5ek: specify proper regulator output ranges

Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.

Fixes: 7540629e ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: default avatarClaudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
parent 7737d936
......@@ -244,8 +244,8 @@ mcp16502@5b {
regulators {
vdd_3v3: VDD_IO {
regulator-name = "VDD_IO";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
......@@ -264,8 +264,8 @@ regulator-state-mem {
vddioddr: VDD_DDR {
regulator-name = "VDD_DDR";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1450000>;
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
......@@ -285,8 +285,8 @@ regulator-state-mem {
vddcore: VDD_CORE {
regulator-name = "VDD_CORE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1850000>;
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
......@@ -306,7 +306,7 @@ regulator-state-mem {
vddcpu: VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1850000>;
regulator-max-microvolt = <1250000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-ramp-delay = <3125>;
......@@ -326,8 +326,8 @@ regulator-state-mem {
vldo1: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-standby {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment