Commit 7f60830a authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Greg Kroah-Hartman

serial: sirf: Use generic uart-has-rtscts DT property

Convert the SiRF UART driver from using the vendor-specific
"sirf,uart-has-rtscts" to the generic "uart-has-rtscts" DT property, as
documented by the Generic Serial DT Bindings.

The old vendor-specific property is still recognized by the driver for
backwards compatibility, but deprecated.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent af99c187
...@@ -9,9 +9,9 @@ Required properties: ...@@ -9,9 +9,9 @@ Required properties:
- clocks : Should contain uart clock number - clocks : Should contain uart clock number
Optional properties: Optional properties:
- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware - uart-has-rtscts: we have hardware flow controller pins in hardware
- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true - rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true
- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true - cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true
Example: Example:
...@@ -28,7 +28,7 @@ On the board-specific dts, we can put rts-gpios and cts-gpios like ...@@ -28,7 +28,7 @@ On the board-specific dts, we can put rts-gpios and cts-gpios like
usp@b0090000 { usp@b0090000 {
compatible = "sirf,prima2-usp-uart"; compatible = "sirf,prima2-usp-uart";
sirf,uart-has-rtscts; uart-has-rtscts;
rts-gpios = <&gpio 15 0>; rts-gpios = <&gpio 15 0>;
cts-gpios = <&gpio 46 0>; cts-gpios = <&gpio 46 0>;
}; };
...@@ -1293,7 +1293,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) ...@@ -1293,7 +1293,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data; sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data;
sirfport->hw_flow_ctrl = sirfport->hw_flow_ctrl =
of_property_read_bool(np, "sirf,uart-has-rtscts"); of_property_read_bool(np, "uart-has-rtscts") ||
of_property_read_bool(np, "sirf,uart-has-rtscts") /* deprecated */;
if (of_device_is_compatible(np, "sirf,prima2-uart") || if (of_device_is_compatible(np, "sirf,prima2-uart") ||
of_device_is_compatible(np, "sirf,atlas7-uart")) of_device_is_compatible(np, "sirf,atlas7-uart"))
sirfport->uart_reg->uart_type = SIRF_REAL_UART; sirfport->uart_reg->uart_type = SIRF_REAL_UART;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment