omap1: Add initcall checks for omap1 and booted board

Otherwise multi-omap1 configurations will fail.
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-ams-delta.c

@@ -339,6 +339,9 @@ static int __init ams_delta_modem_init(void)
 {
 	int err;
 
+	if (!machine_is_ams_delta())
+		return -ENODEV;
+
 	omap_cfg_reg(M14_1510_GPIO2);
 	ams_delta_modem_ports[0].irq =
 			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);

arch/arm/mach-omap1/board-voiceblue.c

@@ -83,6 +83,9 @@ static struct platform_device serial_device = {
 
 static int __init ext_uart_init(void)
 {
+	if (!machine_is_voiceblue())
+		return -ENODEV;
+
 	return platform_device_register(&serial_device);
 }
 arch_initcall(ext_uart_init);
@@ -236,6 +239,9 @@ static struct notifier_block panic_block = {
 
 static int __init voiceblue_setup(void)
 {
+	if (!machine_is_voiceblue())
+		return -ENODEV;
+
 	/* Setup panic notifier */
 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 

arch/arm/mach-omap1/devices.c

@@ -288,6 +288,9 @@ static inline void omap_init_audio(void) {}
  */
 static int __init omap1_init_devices(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */

arch/arm/mach-omap1/lcd_dma.c

@@ -424,6 +424,9 @@ static int __init omap_init_lcd_dma(void)
 {
 	int r;
 
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	if (cpu_is_omap16xx()) {
 		u16 w;
 

arch/arm/mach-omap1/leds.c

@@ -17,6 +17,9 @@
 static int __init
 omap_leds_init(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	if (machine_is_omap_innovator())
 		leds_event = innovator_leds_event;
 

arch/arm/mach-omap1/mcbsp.c

@@ -176,6 +176,9 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 
 static int __init omap1_mcbsp_init(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	if (cpu_is_omap7xx()) {
 		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
 		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);

arch/arm/mach-omap1/pm.c

@@ -661,6 +661,9 @@ static int __init omap_pm_init(void)
 	int error;
 #endif
 
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	printk("Power Management for TI OMAP.\n");
 
 	/*

arch/arm/mach-omap1/pm_bus.c

@@ -73,6 +73,9 @@ static int __init omap1_pm_runtime_init(void)
 	const struct dev_pm_ops *pm;
 	struct dev_pm_ops *omap_pm;
 
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	pm = platform_bus_get_pm_ops();
 	if (!pm) {
 		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",

arch/arm/mach-omap1/serial.c

@@ -258,6 +258,9 @@ late_initcall(omap_serial_wakeup_init);
 
 static int __init omap_init(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	return platform_device_register(&serial_device);
 }
 arch_initcall(omap_init);