usb: usb251xb: Add USB2517i specific struct and IDs

There are USB2517 and USB2517i hubs, which have almost the same
registers space as already supported USB251xBi series. The difference
it in DIDs and in a few functions. This patch adds the USB2517/i data
structures to the driver, so it would have different setting depending
on the device discovered on i2c-bus.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/misc/Kconfig

@@ -238,8 +238,8 @@ config USB_HUB_USB251XB
 	depends on I2C
 	help
 	  This option enables support for configuration via SMBus of the
-	  Microchip USB251xB/xBi USB 2.0 Hub Controller series.
-	  Configuration parameters may be set in devicetree or platform data.
+	  Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
+	  parameters may be set in devicetree or platform data.
 	  Say Y or M here if you need to configure such a device via SMBus.
 
 config USB_HSIC_USB3503

drivers/usb/misc/usb251xb.c

@@ -38,6 +38,7 @@
 #define USB251XB_DEF_PRODUCT_ID_12	0x2512 /* USB2512B/12Bi */
 #define USB251XB_DEF_PRODUCT_ID_13	0x2513 /* USB2513B/13Bi */
 #define USB251XB_DEF_PRODUCT_ID_14	0x2514 /* USB2514B/14Bi */
+#define USB251XB_DEF_PRODUCT_ID_17	0x2517 /* USB2517/17i */
 
 #define USB251XB_ADDR_DEVICE_ID_LSB	0x04
 #define USB251XB_ADDR_DEVICE_ID_MSB	0x05
@@ -82,7 +83,7 @@
 
 #define USB251XB_ADDR_PRODUCT_STRING_LEN	0x14
 #define USB251XB_ADDR_PRODUCT_STRING		0x54
-#define USB251XB_DEF_PRODUCT_STRING		"USB251xB/xBi"
+#define USB251XB_DEF_PRODUCT_STRING		"USB251xB/xBi/7i"
 
 #define USB251XB_ADDR_SERIAL_STRING_LEN		0x15
 #define USB251XB_ADDR_SERIAL_STRING		0x92
@@ -185,6 +186,16 @@ static const struct usb251xb_data usb2514bi_data = {
 	.product_str = "USB2514Bi",
 };
 
+static const struct usb251xb_data usb2517_data = {
+	.product_id = 0x2517,
+	.product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+	.product_id = 0x2517,
+	.product_str = "USB2517i",
+};
+
 static void usb251xb_reset(struct usb251xb *hub, int state)
 {
 	if (!gpio_is_valid(hub->gpio_reset))
@@ -509,6 +520,12 @@ static const struct of_device_id usb251xb_of_match[] = {
 	}, {
 		.compatible = "microchip,usb2514bi",
 		.data = &usb2514bi_data,
+	}, {
+		.compatible = "microchip,usb2517",
+		.data = &usb2517_data,
+	}, {
+		.compatible = "microchip,usb2517i",
+		.data = &usb2517i_data,
 	}, {
 		/* sentinel */
 	}
@@ -573,6 +590,8 @@ static const struct i2c_device_id usb251xb_id[] = {
 	{ "usb2513bi", 0 },
 	{ "usb2514b", 0 },
 	{ "usb2514bi", 0 },
+	{ "usb2517", 0 },
+	{ "usb2517i", 0 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, usb251xb_id);
@@ -589,5 +608,5 @@ static struct i2c_driver usb251xb_i2c_driver = {
 module_i2c_driver(usb251xb_i2c_driver);
 
 MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>");
-MODULE_DESCRIPTION("USB251xB/xBi USB 2.0 Hub Controller Driver");
+MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
 MODULE_LICENSE("GPL");