drm/amd/display: fix DP 422 VID_M half the rate issue.

[Description]
when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N.
for YCbCr420 or compressed YCbCr422, using half rate as  YCbCr444.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dce/dce_stream_encoder.c

@@ -977,7 +977,7 @@ static void dce110_stream_encoder_dp_unblank(
 
 		uint64_t m_vid_l = n_vid;
 
-		m_vid_l *= param->pixel_clk_khz;
+		m_vid_l *= param->timing.pix_clk_100hz / 10;
 		m_vid_l = div_u64(m_vid_l,
 			param->link_settings.link_rate
 				* LINK_RATE_REF_FREQ_IN_KHZ);

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -1052,9 +1052,8 @@ void dce110_unblank_stream(struct pipe_ctx *pipe_ctx,
 	struct dc_link *link = stream->link;
 
 	/* only 3 items below are used by unblank */
-	params.pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_100hz / 10;
+	params.timing = pipe_ctx->stream->timing;
 	params.link_settings.link_rate = link_settings->link_rate;
-	params.pixel_encoding = pipe_ctx->stream->timing.pixel_encoding;
 
 	if (dc_is_dp_signal(pipe_ctx->stream->signal))
 		pipe_ctx->stream_res.stream_enc->funcs->dp_unblank(pipe_ctx->stream_res.stream_enc, &params);

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -2900,6 +2900,29 @@ static void dcn10_setup_vupdate_interrupt(struct pipe_ctx *pipe_ctx)
 		tg->funcs->setup_vertical_interrupt2(tg, start_line);
 }
 
+static void dcn10_unblank_stream(struct pipe_ctx *pipe_ctx,
+		struct dc_link_settings *link_settings)
+{
+	struct encoder_unblank_param params = { { 0 } };
+	struct dc_stream_state *stream = pipe_ctx->stream;
+	struct dc_link *link = stream->link;
+
+	/* only 3 items below are used by unblank */
+	params.timing = pipe_ctx->stream->timing;
+
+	params.link_settings.link_rate = link_settings->link_rate;
+
+	if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
+		if (params.timing.pixel_encoding == PIXEL_ENCODING_YCBCR420)
+			params.timing.pix_clk_100hz /= 2;
+		pipe_ctx->stream_res.stream_enc->funcs->dp_unblank(pipe_ctx->stream_res.stream_enc, &params);
+	}
+
+	if (link->local_sink && link->local_sink->sink_signal == SIGNAL_TYPE_EDP) {
+		link->dc->hwss.edp_backlight_control(link, true);
+	}
+}
+
 static const struct hw_sequencer_funcs dcn10_funcs = {
 	.program_gamut_remap = program_gamut_remap,
 	.init_hw = dcn10_init_hw,
@@ -2921,7 +2944,7 @@ static const struct hw_sequencer_funcs dcn10_funcs = {
 	.update_info_frame = dce110_update_info_frame,
 	.enable_stream = dce110_enable_stream,
 	.disable_stream = dce110_disable_stream,
-	.unblank_stream = dce110_unblank_stream,
+	.unblank_stream = dcn10_unblank_stream,
 	.blank_stream = dce110_blank_stream,
 	.enable_audio_stream = dce110_enable_audio_stream,
 	.disable_audio_stream = dce110_disable_audio_stream,

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c

@@ -836,14 +836,15 @@ void enc1_stream_encoder_dp_unblank(
 		uint64_t m_vid_l = n_vid;
 
 		/* YCbCr 4:2:0 : Computed VID_M will be 2X the input rate */
-		if (param->pixel_encoding == PIXEL_ENCODING_YCBCR420)
+		if (param->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420) {
+			/*this param->pixel_clk_khz is half of 444 rate for 420 already*/
 			n_multiply = 1;
-
+		}
 		/* M / N = Fstream / Flink
 		 * m_vid / n_vid = pixel rate / link rate
 		 */
 
-		m_vid_l *= param->pixel_clk_khz;
+		m_vid_l *= param->timing.pix_clk_100hz / 10;
 		m_vid_l = div_u64(m_vid_l,
 			param->link_settings.link_rate
 				* LINK_RATE_REF_FREQ_IN_KHZ);

drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h

@@ -67,8 +67,7 @@ struct encoder_info_frame {
 
 struct encoder_unblank_param {
 	struct dc_link_settings link_settings;
-	unsigned int pixel_clk_khz;
-	enum dc_pixel_encoding pixel_encoding;
+	struct dc_crtc_timing timing;
 };
 
 struct encoder_set_dp_phy_pattern_param {