Commit 7ff7c82e authored by Nick Kossifidis's avatar Nick Kossifidis Committed by John W. Linville

ath5k: Switch from read-and-clear to write-to-clear method when handling PISR/SISR registers

Since card has 12 tx queues and we want to keep track of the interrupts
per queue we can't fit all these interrupt bits on a single register.
So we have 5 registers, the primary interrupt status register (PISR) and
the 4 secondary interupt status registers (SISRs).

In order to be able to read them all at once (atomic operation) Atheros
introduced the Read-And-Clear registers to make things easier. So when
reading RAC_PISR register, hw does a read on PISR and all SISRs, returns
the value of PISR, copies all SISR values to their shadow copies (RAC_SISRx)
and clears PISR and SISRs. This saves us from reading PISR/SISRs in a sequence.

So far we 've used this approach and MadWiFi/Windows driver etc also used it
for years.

It turns out this operation is not atomic after all (at least not on all cards)
That means it's possible to loose some interrupts because they came after the
copy step and hw cleared them on the clean step !

That's probably the reason we got missed beacons, got stuck queues etc and
couldn't figure out what was going on.

With this patch we switch from RaC operation to an alternative method (that
makes more sense IMHO anyway, I just chose to be on the safe side so far).
Instead of reading RAC registers, we read the normal PISR/SISR registers and
clear any bits we got by writing them back on the register. This will clear only
the bits we got on our read step and leave any new bits unaffected (at least
that's what docs say). So if any new interrupts come up we won't miss it.

I've tested this with an AR5213 and an AR2425 and it seems O.K.

Many thanks to Adrian Chadd for debuging this and reviewing the patch !

v2: Make sure we don't clear PISR bits that map to SISR generated interrupts
(added a comment on the code for this)
Signed-off-by: default avatarNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 61c0d48f
......@@ -1187,7 +1187,13 @@ struct ath5k_hw {
u32 ah_txq_imr_cbrurn;
u32 ah_txq_imr_qtrig;
u32 ah_txq_imr_nofrm;
u32 ah_txq_isr;
u32 ah_txq_isr_txok_all;
u32 ah_txq_isr_txurn;
u32 ah_txq_isr_qcborn;
u32 ah_txq_isr_qcburn;
u32 ah_txq_isr_qtrig;
u32 *ah_rf_banks;
size_t ah_rf_banks_size;
size_t ah_rf_regs_count;
......
......@@ -1689,7 +1689,7 @@ ath5k_tasklet_tx(unsigned long data)
struct ath5k_hw *ah = (void *)data;
for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
if (ah->txqs[i].setup && (ah->ah_txq_isr & BIT(i)))
if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i)))
ath5k_tx_processq(ah, &ah->txqs[i]);
ah->tx_pending = false;
......
......@@ -450,7 +450,6 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
*
* XXX: Link this with tx DMA size ?
* XXX: Use it to save interrupts ?
* TODO: Needs testing, i think it's related to bmiss...
*/
int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
{
......@@ -523,62 +522,161 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
* being mapped on some standard non hw-specific positions
* (check out &ath5k_int).
*
* NOTE: We use read-and-clear register, so after this function is called ISR
* is zeroed.
* NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this
* function gets called are cleared on return.
*/
int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
{
u32 data;
u32 data = 0;
/*
* Read interrupt status from the Interrupt Status register
* on 5210
* Read interrupt status from Primary Interrupt
* Register.
*
* Note: PISR/SISR Not available on 5210
*/
if (ah->ah_version == AR5K_AR5210) {
data = ath5k_hw_reg_read(ah, AR5K_ISR);
if (unlikely(data == AR5K_INT_NOCARD)) {
*interrupt_mask = data;
u32 isr = 0;
isr = ath5k_hw_reg_read(ah, AR5K_ISR);
if (unlikely(isr == AR5K_INT_NOCARD)) {
*interrupt_mask = isr;
return -ENODEV;
}
} else {
/*
* Read interrupt status from Interrupt
* Status Register shadow copy (Read And Clear)
*
* Note: PISR/SISR Not available on 5210
* Filter out the non-common bits from the interrupt
* status.
*/
data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
if (unlikely(data == AR5K_INT_NOCARD)) {
*interrupt_mask = data;
*interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr;
/* Hanlde INT_FATAL */
if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
| AR5K_ISR_DPERR)))
*interrupt_mask |= AR5K_INT_FATAL;
/*
* XXX: BMISS interrupts may occur after association.
* I found this on 5210 code but it needs testing. If this is
* true we should disable them before assoc and re-enable them
* after a successful assoc + some jiffies.
interrupt_mask &= ~AR5K_INT_BMISS;
*/
data = isr;
} else {
u32 pisr = 0;
u32 pisr_clear = 0;
u32 sisr0 = 0;
u32 sisr1 = 0;
u32 sisr2 = 0;
u32 sisr3 = 0;
u32 sisr4 = 0;
/* Read PISR and SISRs... */
pisr = ath5k_hw_reg_read(ah, AR5K_PISR);
if (unlikely(pisr == AR5K_INT_NOCARD)) {
*interrupt_mask = pisr;
return -ENODEV;
}
}
/*
* Get abstract interrupt mask (driver-compatible)
*/
*interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0);
sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1);
sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2);
sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3);
sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4);
if (ah->ah_version != AR5K_AR5210) {
u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2);
/*
* PISR holds the logical OR of interrupt bits
* from SISR registers:
*
* TXOK and TXDESC -> Logical OR of TXOK and TXDESC
* per-queue bits on SISR0
*
* TXERR and TXEOL -> Logical OR of TXERR and TXEOL
* per-queue bits on SISR1
*
* TXURN -> Logical OR of TXURN per-queue bits on SISR2
*
* HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2
*
* BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC
* BCN_TIMEOUT, CAB_TIMEOUT and DTIM
* (and TSFOOR ?) bits on SISR2
*
* QCBRORN and QCBRURN -> Logical OR of QCBRORN and
* QCBRURN per-queue bits on SISR3
* QTRIG -> Logical OR of QTRIG per-queue bits on SISR4
*
* If we clean these bits on PISR we 'll also clear all
* related bits from SISRs, e.g. if we write the TXOK bit on
* PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK
* interrupt got fired for another queue while we were reading
* the interrupt registers and we write back the TXOK bit on
* PISR we 'll lose it. So make sure that we don't write back
* on PISR any bits that come from SISRs. Clearing them from
* SISRs will also clear PISR so no need to worry here.
*/
/*HIU = Host Interface Unit (PCI etc)*/
if (unlikely(data & (AR5K_ISR_HIUERR)))
*interrupt_mask |= AR5K_INT_FATAL;
pisr_clear = pisr & ~AR5K_ISR_BITS_FROM_SISRS;
/*Beacon Not Ready*/
if (unlikely(data & (AR5K_ISR_BNR)))
*interrupt_mask |= AR5K_INT_BNR;
/*
* Write to clear them...
* Note: This means that each bit we write back
* to the registers will get cleared, leaving the
* rest unaffected. So this won't affect new interrupts
* we didn't catch while reading/processing, we 'll get
* them next time get_isr gets called.
*/
ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0);
ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1);
ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2);
ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3);
ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4);
ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR);
/* Flush previous write */
ath5k_hw_reg_read(ah, AR5K_PISR);
if (unlikely(sisr2 & (AR5K_SISR2_SSERR |
AR5K_SISR2_DPERR |
AR5K_SISR2_MCABT)))
*interrupt_mask |= AR5K_INT_FATAL;
/*
* Filter out the non-common bits from the interrupt
* status.
*/
*interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr;
/* We treat TXOK,TXDESC, TXERR and TXEOL
* the same way (schedule the tx tasklet)
* so we track them all together per queue */
if (pisr & AR5K_ISR_TXOK)
ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
AR5K_SISR0_QCU_TXOK);
if (pisr & AR5K_ISR_TXDESC)
ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
AR5K_SISR0_QCU_TXDESC);
if (data & AR5K_ISR_TIM)
if (pisr & AR5K_ISR_TXERR)
ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
AR5K_SISR1_QCU_TXERR);
if (pisr & AR5K_ISR_TXEOL)
ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
AR5K_SISR1_QCU_TXEOL);
/* Currently this is not much usefull since we treat
* all queues the same way if we get a TXURN (update
* tx trigger level) but we might need it later on*/
if (pisr & AR5K_ISR_TXURN)
ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2,
AR5K_SISR2_QCU_TXURN);
/* Misc Beacon related interrupts */
/* For AR5211 */
if (pisr & AR5K_ISR_TIM)
*interrupt_mask |= AR5K_INT_TIM;
if (data & AR5K_ISR_BCNMISC) {
/* For AR5212+ */
if (pisr & AR5K_ISR_BCNMISC) {
if (sisr2 & AR5K_SISR2_TIM)
*interrupt_mask |= AR5K_INT_TIM;
if (sisr2 & AR5K_SISR2_DTIM)
......@@ -591,63 +689,40 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
*interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
}
if (data & AR5K_ISR_RXDOPPLER)
/* Below interrupts are unlikely to happen */
/* HIU = Host Interface Unit (PCI etc)
* Can be one of MCABT, SSERR, DPERR from SISR2 */
if (unlikely(pisr & (AR5K_ISR_HIUERR)))
*interrupt_mask |= AR5K_INT_FATAL;
/*Beacon Not Ready*/
if (unlikely(pisr & (AR5K_ISR_BNR)))
*interrupt_mask |= AR5K_INT_BNR;
if (unlikely(pisr & (AR5K_ISR_RXDOPPLER)))
*interrupt_mask |= AR5K_INT_RX_DOPPLER;
if (data & AR5K_ISR_QCBRORN) {
if (unlikely(pisr & (AR5K_ISR_QCBRORN))) {
*interrupt_mask |= AR5K_INT_QCBRORN;
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
AR5K_SISR3_QCBRORN);
ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3,
AR5K_SISR3_QCBRORN);
}
if (data & AR5K_ISR_QCBRURN) {
if (unlikely(pisr & (AR5K_ISR_QCBRURN))) {
*interrupt_mask |= AR5K_INT_QCBRURN;
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
AR5K_SISR3_QCBRURN);
ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3,
AR5K_SISR3_QCBRURN);
}
if (data & AR5K_ISR_QTRIG) {
if (unlikely(pisr & (AR5K_ISR_QTRIG))) {
*interrupt_mask |= AR5K_INT_QTRIG;
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR4),
AR5K_SISR4_QTRIG);
ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4,
AR5K_SISR4_QTRIG);
}
if (data & AR5K_ISR_TXOK)
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
AR5K_SISR0_QCU_TXOK);
if (data & AR5K_ISR_TXDESC)
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
AR5K_SISR0_QCU_TXDESC);
if (data & AR5K_ISR_TXERR)
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
AR5K_SISR1_QCU_TXERR);
if (data & AR5K_ISR_TXEOL)
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
AR5K_SISR1_QCU_TXEOL);
if (data & AR5K_ISR_TXURN)
ah->ah_txq_isr |= AR5K_REG_MS(
ath5k_hw_reg_read(ah, AR5K_RAC_SISR2),
AR5K_SISR2_QCU_TXURN);
} else {
if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
| AR5K_ISR_HIUERR | AR5K_ISR_DPERR)))
*interrupt_mask |= AR5K_INT_FATAL;
/*
* XXX: BMISS interrupts may occur after association.
* I found this on 5210 code but it needs testing. If this is
* true we should disable them before assoc and re-enable them
* after a successful assoc + some jiffies.
interrupt_mask &= ~AR5K_INT_BMISS;
*/
data = pisr;
}
/*
......
......@@ -280,6 +280,10 @@
* 5211/5212 we have one primary and 4 secondary registers.
* So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
* Most of these bits are common for all chipsets.
*
* NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain
* the logical OR from per-queue interrupt bits found on SISR registers
* (see below).
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
......@@ -292,7 +296,10 @@
#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */
#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)
* NOTE: We don't have per-queue info for this
* one, but we can enable it per-queue through
* TXNOFRM_QCU field on TXNOFRM register */
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
......@@ -302,21 +309,29 @@
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+]
* 'or' of MCABT, SSERR, DPERR from SISR2 */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */
#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt
* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
* CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\
AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\
AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\
AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\
AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG)
/*
* Secondary status registers [5211+] (0 - 4)
*
......@@ -347,7 +362,7 @@
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment